chip northbridge/intel/sandybridge # IGD Displays register "gfx" = "GMA_STATIC_DISPLAYS(1)" register "gpu_dp_d_hotplug" = "0x04" # Enable Panel as LVDS and configure power delays register "gpu_panel_port_select" = "PANEL_PORT_LVDS" register "gpu_panel_power_cycle_delay" = "4" register "gpu_panel_power_up_delay" = "100" register "gpu_panel_power_down_delay" = "100" register "gpu_panel_power_backlight_on_delay" = "3000" register "gpu_panel_power_backlight_off_delay" = "2000" register "gpu_cpu_backlight" = "0x1155" register "gpu_pch_backlight" = "0x11551155" register "spd_addresses" = "{0x50, 0, 0x52, 0}" device domain 0 on subsystemid 0x17aa 0x21fe inherit device ref host_bridge on end # Host bridge device ref peg10 off end # PCIe Bridge for discrete graphics device ref igd on end # Internal graphics VGA controller device ref dev4 off end # Signal processing controller chip southbridge/intel/bd82x6x # GPI routing register "alt_gp_smi_en" = "0x0000" register "gpi6_routing" = "2" register "gpi13_routing" = "2" # Enable SATA ports 0 (2.5 inch) and 1 (mSATA) register "sata_port_map" = "0x3" # Set max SATA speed to 6.0 Gb/s register "sata_interface_speed_support" = "0x3" register "gen1_dec" = "0x007c1611" register "gen2_dec" = "0x00040069" register "gen3_dec" = "0x000c0701" register "gen4_dec" = "0x000c06a1" register "xhci_switchable_ports" = "0xf" register "superspeed_capable_ports" = "0xf" register "xhci_overcurrent_mapping" = "0x00000c03" register "usb_port_config" = "{ {1, 1, 0}, /* P0: USB 3.0 1 (OC0) */ {1, 1, 0}, /* P1: USB 3.0 2 (OC0) */ {0, 0, 0}, {1, 1, -1}, /* P3: Camera (no OC) */ {1, 0, -1}, /* P4: WLAN (no OC) */ {1, 0, -1}, /* P5: WWAN (no OC) */ {0, 0, 0}, {0, 0, 0}, {0, 0, 0}, {1, 1, 4}, /* P9: USB 2.0 (AUO4) (OC4) */ {0, 0, 0}, {0, 0, 0}, {0, 0, 0}, {1, 0, -1} /* P13: Bluetooth (no OC) */ }" # Enable zero-based linear PCIe root port functions register "pcie_port_coalesce" = "true" register "spi_uvscc" = "0x2005" register "spi_lvscc" = "0x2005" device ref xhci on end # USB 3.0 Controller device ref mei1 on end # Management Engine Interface 1 device ref mei2 off end # Management Engine Interface 2 device ref me_ide_r off end # Management Engine IDE-R device ref me_kt off end # Management Engine KT device ref gbe off end # Intel Gigabit Ethernet device ref ehci2 on end # USB2 EHCI #2 device ref hda on end # High Definition Audio controller device ref pcie_rp1 on end # PCIe Port #1 device ref pcie_rp2 on end # PCIe Port #2 (WLAN card) device ref pcie_rp3 on end # PCIe Port #3 (Card Reader) device ref pcie_rp4 off end # PCIe Port #4 device ref pcie_rp5 off end # PCIe Port #5 device ref pcie_rp6 on end # PCIe Port #6 (Ethernet controller) device ref pcie_rp7 off end # PCIe Port #7 device ref pcie_rp8 off end # PCIe Port #8 device ref ehci1 on end # USB2 EHCI #1 device ref pci_bridge off end # PCI bridge device ref lpc on # LPC bridge PCI-LPC bridge chip drivers/pc80/tpm device pnp 0c31.0 on end end chip ec/lenovo/h8 device pnp ff.1 on # dummy io 0x60 = 0x62 io 0x62 = 0x66 io 0x64 = 0x1600 io 0x66 = 0x1604 end register "config0" = "0xa6" register "config1" = "0x04" register "config2" = "0xa0" register "config3" = "0x62" register "has_keyboard_backlight" = "0" register "beepmask0" = "0x00" register "beepmask1" = "0x87" register "has_power_management_beeps" = "0" register "event0_enable" = "0xff" register "event1_enable" = "0xff" register "event2_enable" = "0xff" register "event3_enable" = "0xff" register "event4_enable" = "0xff" register "event5_enable" = "0xff" register "event6_enable" = "0xff" register "event7_enable" = "0xff" register "event8_enable" = "0xff" register "event9_enable" = "0xff" register "eventa_enable" = "0xff" register "eventb_enable" = "0xff" register "eventc_enable" = "0xff" register "eventd_enable" = "0xff" register "evente_enable" = "0xff" register "eventf_enable" = "0xff" end end device ref sata1 on end # SATA Controller 1 device ref smbus on # SMBus # eeprom, 8 virtual devices, same chip chip drivers/i2c/at24rf08c device i2c 54 on end device i2c 55 on end device i2c 56 on end device i2c 57 on end device i2c 5c on end device i2c 5d on end device i2c 5e on end device i2c 5f on end end end device ref sata2 off end # SATA Controller 2 device ref thermal off end # Thermal end end end