chip northbridge/intel/sandybridge # IGD Displays register "gfx" = "GMA_STATIC_DISPLAYS(1)" register "gpu_dp_d_hotplug" = "0x04" # Enable Panel as LVDS and configure power delays register "gpu_panel_port_select" = "PANEL_PORT_LVDS" register "gpu_panel_power_cycle_delay" = "4" register "gpu_panel_power_up_delay" = "100" register "gpu_panel_power_down_delay" = "100" register "gpu_panel_power_backlight_on_delay" = "3000" register "gpu_panel_power_backlight_off_delay" = "2000" register "gpu_cpu_backlight" = "0x1155" register "gpu_pch_backlight" = "0x11551155" device cpu_cluster 0 on chip cpu/intel/model_206ax # Magic APIC ID to locate this chip device lapic 0 on end device lapic 0xacac off end register "acpi_c1" = "1" register "acpi_c2" = "3" register "acpi_c3" = "5" end end device domain 0 on subsystemid 0x17aa 0x21fe inherit device pci 00.0 on end # Host bridge device pci 01.0 off end # PCIe Bridge for discrete graphics device pci 02.0 on end # Internal graphics VGA controller device pci 04.0 off end # Signal processing controller chip southbridge/intel/bd82x6x # GPI routing register "alt_gp_smi_en" = "0x0000" register "gpi6_routing" = "2" register "gpi13_routing" = "2" # Enable SATA ports 0 (2.5 inch) and 1 (mSATA) register "sata_port_map" = "0x3" # Set max SATA speed to 6.0 Gb/s register "sata_interface_speed_support" = "0x3" register "gen1_dec" = "0x007c1611" register "gen2_dec" = "0x00040069" register "gen3_dec" = "0x000c0701" register "gen4_dec" = "0x000c06a1" register "xhci_switchable_ports" = "0xf" register "superspeed_capable_ports" = "0xf" register "xhci_overcurrent_mapping" = "0x00000c03" # Enable zero-based linear PCIe root port functions register "pcie_port_coalesce" = "true" register "spi_uvscc" = "0x2005" register "spi_lvscc" = "0x2005" device pci 14.0 on end # USB 3.0 Controller device pci 16.0 on end # Management Engine Interface 1 device pci 16.1 off end # Management Engine Interface 2 device pci 16.2 off end # Management Engine IDE-R device pci 16.3 off end # Management Engine KT device pci 19.0 off end # Intel Gigabit Ethernet device pci 1a.0 on end # USB2 EHCI #2 device pci 1b.0 on end # High Definition Audio Audio controller device pci 1c.0 on end # PCIe Port #1 device pci 1c.1 on end # PCIe Port #2 (WLAN card) device pci 1c.2 on end # PCIe Port #3 (Card Reader) device pci 1c.3 off end # PCIe Port #4 device pci 1c.4 off end # PCIe Port #5 device pci 1c.5 on end # PCIe Port #6 (Ethernet controller) device pci 1c.6 off end # PCIe Port #7 device pci 1c.7 off end # PCIe Port #8 device pci 1d.0 on end # USB2 EHCI #1 device pci 1e.0 off end # PCI bridge device pci 1f.0 on # LPC bridge PCI-LPC bridge chip drivers/pc80/tpm device pnp 0c31.0 on end end chip ec/lenovo/h8 device pnp ff.1 on # dummy io 0x60 = 0x62 io 0x62 = 0x66 io 0x64 = 0x1600 io 0x66 = 0x1604 end register "config0" = "0xa6" register "config1" = "0x04" register "config2" = "0xa0" register "config3" = "0x62" register "has_keyboard_backlight" = "0" register "beepmask0" = "0x00" register "beepmask1" = "0x87" register "has_power_management_beeps" = "0" register "event0_enable" = "0xff" register "event1_enable" = "0xff" register "event2_enable" = "0xff" register "event3_enable" = "0xff" register "event4_enable" = "0xff" register "event5_enable" = "0xff" register "event6_enable" = "0xff" register "event7_enable" = "0xff" register "event8_enable" = "0xff" register "event9_enable" = "0xff" register "eventa_enable" = "0xff" register "eventb_enable" = "0xff" register "eventc_enable" = "0xff" register "eventd_enable" = "0xff" register "evente_enable" = "0xff" register "eventf_enable" = "0xff" end end device pci 1f.2 on end # SATA Controller 1 device pci 1f.3 on # SMBus # eeprom, 8 virtual devices, same chip chip drivers/i2c/at24rf08c device i2c 54 on end device i2c 55 on end device i2c 56 on end device i2c 57 on end device i2c 5c on end device i2c 5d on end device i2c 5e on end device i2c 5f on end end end device pci 1f.5 off end # SATA Controller 2 device pci 1f.6 off end # Thermal end end end