# SPDX-License-Identifier: GPL-2.0-only

chip soc/intel/skylake
	register "eist_enable" = "true"

	device domain 0 on
		device ref peg0         on	# PCIE16X
			# These configurations are technically for PCIe root
			# ports. However, they are used as there is no
			# equivalent for PEG devices.
			register "PcieRpClkReqSupport[0]" = "true"
			register "PcieRpClkReqNumber[0]"  = "2"
			register "PcieRpClkSrcNumber[0]"  = "0"
		end
		device ref igpu		on  end
		device ref south_xhci	on
			register "usb2_ports" = "{
				[0]  = USB2_PORT_MID(OC1),	// USB30A
				[1]  = USB2_PORT_MID(OC1),	// USB30B
				[2]  = USB2_PORT_MID(OC2),	// F_USB30_1A
				[3]  = USB2_PORT_MID(OC2),	// F_USB30_1B
				[4]  = USB2_PORT_MID(OC3),	// F_USB30_2A
				[5]  = USB2_PORT_MID(OC3),	// F_USB30_2B
				[6]  = USB2_PORT_MID(OC_SKIP),	// M.2 Bluetooth
				[7]  = USB2_PORT_MID(OC5),	// USB_LANA
				[8]  = USB2_PORT_MID(OC5),	// USB_LANB
				[9]  = USB2_PORT_MID(OC_SKIP),	// F_USB1 (Pins 5, 7)
				[10] = USB2_PORT_MID(OC_SKIP),	// F_USB1 (Pins 6, 8)
				// Used by the SD/MMC reader.
				[11] = USB2_PORT_MID(OC_SKIP),	// F_USB2 (Pins 5, 7)
			}"

			register "usb3_ports" = "{
				[0] = USB3_PORT_DEFAULT(OC1),	// USB30A
				[1] = USB3_PORT_DEFAULT(OC1),	// USB30B
				[2] = USB3_PORT_DEFAULT(OC2),	// F_USB30_1A
				[3] = USB3_PORT_DEFAULT(OC2),	// F_USB30_1B
				[4] = USB3_PORT_DEFAULT(OC3),	// F_USB30_2A
				[5] = USB3_PORT_DEFAULT(OC3),	// F_USB30_2B
			}"
		end
		device ref thermal	on  end
		device ref heci1	on  end
		device ref sata		on
			register "SataSalpSupport" = "true"
			register "SataPortsEnable" = "{
				[0] = true,	// SATA1
				[1] = true,	// SATA2
				[2] = true,	// SATA3
			}"
		end
		device ref pcie_rp5	on	# USB_LAN
			register "PcieRpEnable[4]"                 = "true"
			register "PcieRpLtrEnable[4]"              = "true"
			register "PcieRpClkReqSupport[4]"          = "true"
			register "PcieRpClkReqNumber[4]"           = "5"
			register "PcieRpClkSrcNumber[4]"           = "5"
			register "PcieRpAdvancedErrorReporting[4]" = "true"
		end
		device ref pcie_rp7	on	# PCIE1X_2
			register "PcieRpEnable[6]"                 = "true"
			register "PcieRpLtrEnable[6]"              = "true"
			register "PcieRpClkReqSupport[6]"          = "true"
			register "PcieRpClkReqNumber[6]"           = "7"
			register "PcieRpClkSrcNumber[6]"           = "7"
			register "PcieRpAdvancedErrorReporting[6]" = "true"
		end
		device ref pcie_rp8	on	# PCIE1X_1
			register "PcieRpEnable[7]"                 = "true"
			register "PcieRpLtrEnable[7]"              = "true"
			register "PcieRpClkReqSupport[7]"          = "true"
			register "PcieRpClkReqNumber[7]"           = "8"
			register "PcieRpClkSrcNumber[7]"           = "8"
			register "PcieRpAdvancedErrorReporting[7]" = "true"
		end
		device ref pcie_rp11	on	# M2_WIFI
			register "PcieRpEnable[10]"                 = "true"
			register "PcieRpLtrEnable[10]"              = "true"
			register "PcieRpClkReqSupport[10]"          = "true"
			register "PcieRpClkReqNumber[10]"           = "1"
			register "PcieRpClkSrcNumber[10]"           = "1"
			register "PcieRpAdvancedErrorReporting[10]" = "true"
		end
		device ref pcie_rp21	on	# M2_SSD
			register "PcieRpEnable[20]"                 = "true"
			register "PcieRpLtrEnable[20]"              = "true"
			register "PcieRpClkReqSupport[20]"          = "true"
			register "PcieRpClkReqNumber[20]"           = "6"
			register "PcieRpClkSrcNumber[20]"           = "2"
			register "PcieRpAdvancedErrorReporting[20]" = "true"
		end
		device ref lpc_espi	on
			register "serirq_mode" = "SERIRQ_CONTINUOUS"

			chip superio/ite/it8629e
				register "TMPIN1.mode" = "THERMAL_DIODE"	# THER_HD
				register "TMPIN2.mode" = "THERMAL_MODE_DISABLED"
				# Located close to VR MOSFET.
				register "TMPIN3.mode" = "THERMAL_DIODE"

				# CPU_FAN
				register "FAN1" = "{
					.mode  = FAN_SMART_AUTOMATIC,
					.smart = {
						.tmpin     = 3,
						.tmp_off   = 35,
						.tmp_start = 60,
						.tmp_full  = 85,
						.tmp_delta = 2,
						.pwm_start = 20,
						.slope     = 24,
					},
				}"

				register "FAN2.mode" = "FAN_MODE_OFF"	# SYS_FAN
				register "FAN3.mode" = "FAN_MODE_OFF"	# AUX1_FAN
				# TODO: Add support for 6 fans.
				#register "FAN6.mode" = "FAN_MODE_OFF"	# AUX2_FAN

				register "ec.vin_mask" = "VIN_ALL"

				# Vendor values dumped using util/superiotool.
				device pnp 2e.0 off end
				device pnp 2e.1 on	# VGA_COM1A
					io  0x60 = 0x03f8
					irq 0x70 = 0x04
					irq 0xf1 = 0x50
				end
				device pnp 2e.2 off end
				device pnp 2e.3 off end
				device pnp 2e.4 on
					io  0x60 = 0x0a30
					io  0x62 = 0x0230
					irq 0x70 = 0x09
					irq 0xf0 = 0x40
				end
				device pnp 2e.5 on	# KB_MS (PS/2 Keyboard)
					io  0x60 = 0x0060
					io  0x62 = 0x0064
					irq 0x70 = 0x01
					irq 0x71 = 0x02
					irq 0xf0 = 0x48
				end
				device pnp 2e.6 on	# KB_MS (PS/2 Mouse)
					irq 0x70 = 0x0c
					irq 0x71 = 0x02
				end
				device pnp 2e.7 on
					irq 0x25 = 0x11
					irq 0x26 = 0x04
					irq 0x28 = 0x81
					irq 0x2a = 0x0d
					irq 0x2c = 0x01
					io  0x60 = 0x0000
					io  0x62 = 0x0a00
					io  0x64 = 0x0000
					irq 0x70 = 0x00
					irq 0x71 = 0x09
					irq 0x72 = 0x20
					irq 0x73 = 0x38
					irq 0xb8 = 0x11
					irq 0xbc = 0xc0
					irq 0xbd = 0x03
					irq 0xc0 = 0x01
					irq 0xc1 = 0x04
					irq 0xc3 = 0x41
					irq 0xc8 = 0x01
					irq 0xc9 = 0x04
					irq 0xcb = 0x01
					irq 0xe9 = 0x07
					irq 0xf0 = 0x10
					irq 0xf4 = 0x0c
					irq 0xf6 = 0x0e
					irq 0xf8 = 0x08
					irq 0xf9 = 0x02
					irq 0xfc = 0x7c
				end
				device pnp 2e.8 on
					io  0x60 = 0x0270
					irq 0x70 = 0x08
				end
				device pnp 2e.a off end
			end
			chip drivers/pc80/tpm
				device pnp c31.0 on  end
			end
		end
		device ref pmc		on  end
		device ref hda		on  end
		device ref smbus	on  end
		device ref gbe		on  end	# USB_LAN (maps to PCIe RP5)
	end
end