# SPDX-License-Identifier: GPL-2.0-or-later chip northbridge/intel/x4x # Northbridge device cpu_cluster 0 on ops x4x_cpu_bus_ops end # APIC cluster device domain 0 on ops x4x_pci_domain_ops # PCI domain subsystemid 0x17aa 0x304f inherit device pci 0.0 on end # Host Bridge device pci 1.0 on end # PEG device pci 2.0 on end # Integrated graphics controller chip southbridge/intel/i82801gx # Southbridge register "pirqa_routing" = "0x0b" register "pirqb_routing" = "0x0b" register "pirqc_routing" = "0x0b" register "pirqd_routing" = "0x0b" register "pirqe_routing" = "0x80" register "pirqf_routing" = "0x80" register "pirqg_routing" = "0x80" register "pirqh_routing" = "0x0b" # GPI routing # 0 No effect (default) # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) # 2 SCI (if corresponding GPIO_EN bit is also set) register "gpi13_routing" = "1" # ??vendor register "ide_enable_primary" = "true" register "gpe0_en" = "0x440" register "gen1_dec" = "0x00fc0a01" device pci 1b.0 on end # Audio device pci 1c.0 on end # PCIe 1 device pci 1c.1 on # PCIe 2: NIC device pci 00.0 on end end device pci 1c.2 off end # PCIe 3 device pci 1c.3 off end # PCIe 4 device pci 1d.0 on end # USB device pci 1d.1 on end # USB device pci 1d.2 on end # USB device pci 1d.3 on end # USB device pci 1d.7 on end # USB device pci 1e.0 on end # PCI bridge device pci 1e.2 off end # AC'97 Audio Controller device pci 1e.3 off end # AC'97 Modem Controller device pci 1f.0 on # LPC bridge chip superio/smsc/smscsuperio device pnp 2e.0 off end # Floppy device pnp 2e.3 on # Parallel Port io 0x60 = 0x378 irq 0x70 = 7 drq 0x74 = 3 end device pnp 2e.4 on # COM1 io 0x60 = 0x3f8 irq 0x70 = 4 end device pnp 2e.5 off end # COM2 device pnp 2e.7 on # Keyboard io 0x60 = 0x60 # Can't read this back io 0x62 = 0x64 # Can't read this back irq 0x70 = 1 irq 0x72 = 12 end device pnp 2e.a on # Runtime Regs io 0x60 = 0x0a00 end end # smscsuperio end device pci 1f.1 on end # PATA/IDE device pci 1f.2 on end # SATA device pci 1f.3 on # SMbus chip drivers/i2c/at24rf08c device i2c 54 on end device i2c 55 on end device i2c 56 on end device i2c 57 on end end chip drivers/i2c/ck505 register "mask" = "{ 0x00, 0x80 }" register "regs" = "{ 0x00, 0x80 }" device i2c 69 on end end end end end end