## SPDX-License-Identifier: GPL-2.0-only

chip soc/intel/skylake
	# Enable deep Sx states
	register "deep_s5_enable_ac" = "1"
	register "deep_s5_enable_dc" = "1"
	register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN | DSX_EN_WAKE_PIN"

	register "eist_enable" = "1"

	# GPE configuration
	# Note that GPE events called out in ASL code rely on this
	# route. i.e. If this route changes then the affected GPE
	# offset bits also need to be changed.
	register "gpe0_dw0" = "GPP_G"
	register "gpe0_dw1" = "GPP_D"
	register "gpe0_dw2" = "GPP_E"

	# Enabling SLP_S3#, SLP_S4#, SLP_SUS and SLP_A Stretch
	# SLP_S3 Minimum Assertion Width. Values 0: 60us, 1: 1ms, 2: 50ms, 3: 2s
	register "PmConfigSlpS3MinAssert" = "0x02"

	# SLP_S4 Minimum Assertion Width. Values 0: default, 1: 1s, 2: 2s, 3: 3s, 4: 4s
	register "PmConfigSlpS4MinAssert" = "0x04"

	# SLP_SUS Minimum Assertion Width. Values 0: 0ms, 1: 500ms, 2: 1s, 3: 4s
	register "PmConfigSlpSusMinAssert" = "0x03"

	# SLP_A Minimum Assertion Width. Values 0: 0ms, 1: 4s, 2: 98ms, 3: 2s
	register "PmConfigSlpAMinAssert" = "0x03"

	# PL2 override 65W
	register "power_limits_config" = "{
		.tdp_pl2_override = 65,
	}"

	register "SerialIoDevMode" = "{
		[PchSerialIoIndexUart2] = PchSerialIoSkipInit, // LPSS UART
	}"

	# VR Settings Configuration for 4 Domains
	#+----------------+-------+-------+-------+-------+
	#| Domain/Setting |  SA   |  IA   | GTUS  |  GTS  |
	#+----------------+-------+-------+-------+-------+
	#| Psi1Threshold  | 20A   | 20A   | 20A   | 20A   |
	#| Psi2Threshold  | 4A    | 5A    | 5A    | 5A    |
	#| Psi3Threshold  | 1A    | 1A    | 1A    | 1A    |
	#| Psi3Enable     | 1     | 1     | 1     | 1     |
	#| Psi4Enable     | 1     | 1     | 1     | 1     |
	#| ImonSlope      | 0     | 0     | 0     | 0     |
	#| ImonOffset     | 0     | 0     | 0     | 0     |
	#| IccMax         | 11A   | 66A   | 48A   | 48A   |
	#| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V |
	#| AcLoadline     | 3.9   | 2.1   | 3.1   | 3.1   |
	#| DcLoadline     | 3.9   | 2.1   | 3.1   | 3.1   |
	#+----------------+-------+-------+-------+-------+
	register "domain_vr_config[VR_SYSTEM_AGENT]" = "{
		.vr_config_enable = 1,
		.psi1threshold = VR_CFG_AMP(20),
		.psi2threshold = VR_CFG_AMP(4),
		.psi3threshold = VR_CFG_AMP(1),
		.psi3enable = 1,
		.psi4enable = 1,
		.imon_slope = 0x0,
		.imon_offset = 0x0,
		.icc_max = VR_CFG_AMP(11),
		.voltage_limit = 1520,
		.ac_loadline = 390,
		.dc_loadline = 390,
	}"

	register "domain_vr_config[VR_IA_CORE]" = "{
		.vr_config_enable = 1,
		.psi1threshold = VR_CFG_AMP(20),
		.psi2threshold = VR_CFG_AMP(5),
		.psi3threshold = VR_CFG_AMP(1),
		.psi3enable = 1,
		.psi4enable = 1,
		.imon_slope = 0x0,
		.imon_offset = 0x0,
		.icc_max = VR_CFG_AMP(66),
		.voltage_limit = 1520,
		.ac_loadline = 210,
		.dc_loadline = 210,
	}"

	register "domain_vr_config[VR_GT_UNSLICED]" = "{
		.vr_config_enable = 1,
		.psi1threshold = VR_CFG_AMP(20),
		.psi2threshold = VR_CFG_AMP(5),
		.psi3threshold = VR_CFG_AMP(1),
		.psi3enable = 1,
		.psi4enable = 1,
		.imon_slope = 0x0,
		.imon_offset = 0x0,
		.icc_max = VR_CFG_AMP(48),
		.voltage_limit = 1520,
		.ac_loadline = 310,
		.dc_loadline = 310,
	}"

	register "domain_vr_config[VR_GT_SLICED]" = "{
		.vr_config_enable = 1,
		.psi1threshold = VR_CFG_AMP(20),
		.psi2threshold = VR_CFG_AMP(5),
		.psi3threshold = VR_CFG_AMP(1),
		.psi3enable = 1,
		.psi4enable = 1,
		.imon_slope = 0x0,
		.imon_offset = 0x0,
		.icc_max = VR_CFG_AMP(48),
		.voltage_limit = 1520,
		.ac_loadline = 310,
		.dc_loadline = 310,
	}"

	# Send an extra VR mailbox command for the PS4 exit issue
	register "SendVrMbxCmd" = "2"

	device cpu_cluster 0 on end
	device domain 0 on
		subsystemid 0x17aa 0x30d0 inherit
		device ref igpu on
			register "PrimaryDisplay" = "Display_iGFX"
		end
		device ref sa_thermal on end
		device ref gmm on end
		device ref south_xhci on
			register "usb2_ports" = "{
				[0] = USB2_PORT_MID(OC0),	// Front Port 1
				[1] = USB2_PORT_MID(OC0),	// Front Port 2
				[2] = USB2_PORT_MID(OC1),	// Rear Port 3
				[3] = USB2_PORT_MID(OC2),	// Rear Port 4
				[4] = USB2_PORT_MID(OC3),	// Rear Port 5
				[5] = USB2_PORT_MID(OC4),	// Rear Port 6
				[6] = USB2_PORT_MID(OC1),	// Internal header
				[8] = USB2_PORT_SHORT(OC_SKIP),	// M.2 2230
			}"
			register "usb3_ports" = "{
				[0] = USB3_PORT_DEFAULT(OC0),	// Front Port 1
				[1] = USB3_PORT_DEFAULT(OC0),	// Front Port 2
				[2] = USB3_PORT_DEFAULT(OC3),	// Rear Port 3
				[3] = USB3_PORT_DEFAULT(OC3),	// Rear Port 4
				[4] = USB3_PORT_DEFAULT(OC1),	// Rear Port 5
				[5] = USB3_PORT_DEFAULT(OC1),	// Rear Port 6
			}"
		end
		device ref thermal on end
		device ref heci1 on end
		device ref sata on
			register "SataSalpSupport" = "1"
			register "SataPortsEnable" = "{
				[0]     = 1,
				[1]     = 1,
				[2]     = 1,
				[3]     = 1,
				[4]     = 1,
			}"
			register "SataPortsHotPlug" = "{
				[0]     = 1,
				[1]     = 1,
			}"
		end
		device ref pcie_rp17 on # M.2 2280 / 2242 - SSD
			register "PcieRpEnable[16]"			= "1"
			register "PcieRpClkReqSupport[16]"		= "1"
			register "PcieRpClkReqNumber[16]"		= "1"
			register "PcieRpAdvancedErrorReporting[16]"	= "1"
			register "PcieRpLtrEnable[16]"			= "1"
			register "PcieRpClkSrcNumber[16]"		= "7"
			register "PcieRpHotPlug[16]"			= "1"
		end
		device ref pcie_rp7 on # M.2 2230 - WLAN
			register "PcieRpEnable[6]"			= "1"
			register "PcieRpClkReqSupport[6]"		= "1"
			register "PcieRpClkReqNumber[6]"		= "11"
			register "PcieRpAdvancedErrorReporting[6]"	= "1"
			register "PcieRpLtrEnable[6]"			= "1"
			register "PcieRpClkSrcNumber[6]"		= "1"
			register "PcieRpHotPlug[6]"			= "1"
			chip drivers/wifi/generic
				register "wake" = "GPE0_PCI_EXP"
				device generic 0 on end
			end
		end
		device ref lpc_espi on
			# Set LPC Serial IRQ mode
			register "serirq_mode" = "SERIRQ_CONTINUOUS"
			chip superio/nuvoton/nct6687d
				device pnp 2e.1 off end		# Parallel port
				device pnp 2e.2 on		# COM1 - optional module
					io 0x60 = 0x3f8
					irq 0x70 = 3
				end
				device pnp 2e.3 off end		# COM2, IR
				device pnp 2e.5 off end		# Keyboard
				device pnp 2e.6 off end		# CIR
				device pnp 2e.7 off end		# GPIO0-7
				device pnp 2e.8 off end		# P80 UART
				device pnp 2e.9 off end		# GPIO8-9, GPIO1-8 AF
				device pnp 2e.a on		# ACPI
					io 0x60 = 0xa10
				end
				device pnp 2e.b on		# EC
					io 0x60 = 0xa20
				end
				device pnp 2e.c off end		# RTC
				device pnp 2e.d off end		# Deep Sleep
				device pnp 2e.e on		# TACH/PWM assignment
					irq 0xe4 = 0x10
					irq 0xe5 = 0x09
				end
				device pnp 2e.f off end		# Function register
			end
			chip drivers/pc80/tpm
				device pnp 0c31.0 on end
			end
		end
		device ref hda on end
		device ref smbus on end
		device ref gbe on end
	end
end