chip northbridge/intel/haswell register "gfx" = "GMA_STATIC_DISPLAYS(0)" register "gpu_ddi_e_connected" = "1" register "gpu_dp_b_hotplug" = "4" register "gpu_dp_c_hotplug" = "4" register "gpu_dp_d_hotplug" = "4" register "panel_cfg" = "{ .up_delay_ms = 200, .down_delay_ms = 50, .cycle_delay_ms = 500, .backlight_on_delay_ms = 1, .backlight_off_delay_ms = 1, .backlight_pwm_hz = 220, }" register "ec_present" = "true" chip cpu/intel/haswell device cpu_cluster 0 on ops haswell_cpu_bus_ops end end device domain 0 on ops haswell_pci_domain_ops subsystemid 0x17aa 0x2211 inherit device pci 00.0 on end # Host bridge device pci 01.0 on end # PCIe graphics device pci 02.0 on # iGPU subsystemid 0x17aa 0x221e end device pci 03.0 on end # Mini-HD chip southbridge/intel/lynxpoint # Intel Series 8 Lynx Point PCH register "gen1_dec" = "0x007c1601" register "gen2_dec" = "0x000c15e1" register "gen3_dec" = "0x00040291" register "gen4_dec" = "0x000c06a1" register "gpi13_routing" = "2" register "gpi1_routing" = "2" # 0(HDD), 1(I/O Subcard M.2), 4(WWAN/SSD M.2), 5(ODD) register "sata_port_map" = "0x33" device pci 14.0 on end # xHCI Controller device pci 16.0 on end # Management Engine Interface 1 device pci 16.1 off end # Management Engine Interface 2 device pci 16.2 off end # Management Engine IDE-R device pci 16.3 on end # Management Engine KT device pci 19.0 on # Intel Gigabit Ethernet subsystemid 0x17aa 0x2210 end device pci 1a.0 on end # USB2 EHCI #2 device pci 1b.0 on end # High Definition Audio device pci 1c.0 on end # PCIe Port #1 device pci 1c.1 on end # PCIe Port #2 device pci 1c.2 on end # PCIe Port #3 device pci 1c.3 off end # PCIe Port #4 device pci 1c.4 on end # PCIe Port #5 device pci 1d.0 on end # USB2 EHCI #1 device pci 1f.0 on # LPC bridge chip ec/lenovo/pmh7 register "backlight_enable" = "true" register "dock_event_enable" = "true" device pnp ff.1 on end # dummy end chip ec/lenovo/h8 # FIXME: has_power_management_beeps, has_uwb register "beepmask0" = "0x00" register "beepmask1" = "0x86" register "config0" = "0xa6" register "config1" = "0x05" register "config2" = "0xa8" register "config3" = "0xc4" register "has_keyboard_backlight" = "1" register "event2_enable" = "0xff" register "event3_enable" = "0xff" register "event4_enable" = "0xd0" register "event5_enable" = "0x3c" register "event7_enable" = "0x81" register "event8_enable" = "0x7b" register "event9_enable" = "0xff" register "eventb_enable" = "0x08" register "eventc_enable" = "0xff" register "eventd_enable" = "0xff" register "evente_enable" = "0x9d" device pnp ff.2 on # dummy io 0x60 = 0x62 io 0x62 = 0x66 io 0x64 = 0x1600 io 0x66 = 0x1604 end end chip drivers/pc80/tpm device pnp 0c31.0 on end end end device pci 1f.2 on end # SATA Controller 1 device pci 1f.3 on end # SMBus device pci 1f.5 off end # SATA Controller 2 device pci 1f.6 off end # Thermal end end end