# SPDX-License-Identifier: GPL-2.0-only

chip soc/intel/skylake

	register "PmConfigSlpS3MinAssert"	= "SLP_S3_MIN_ASSERT_50MS"
	register "PmConfigSlpS4MinAssert"	= "SLP_S4_MIN_ASSERT_4S"
	register "PmConfigSlpSusMinAssert"	= "SLP_SUS_MIN_ASSERT_4S"
	register "PmConfigSlpAMinAssert"	= "SLP_A_MIN_ASSERT_2S"
	register "PmConfigPwrCycDur"		= "RESET_POWER_CYCLE_4S"

	# VR Settings Configuration for 2 Domains
	#+----------------+-------+-------+
	#| Domain/Setting | VCC   | VCCGT |
	#+----------------+-------+-------+
	#| Psi1Threshold  | 20A   | 20A   |
	#| Psi2Threshold  | 5A    | 5A    |
	#| Psi3Threshold  | 1A    | 1A    |
	#| Psi3Enable     | 1     | 1     |
	#| Psi4Enable     | 1     | 1     |
	#| ImonSlope      | 0     | 0     |
	#| ImonOffset     | 0     | 0     |
	#| IccMax         | 55A   | 35A   |
	#| VrVoltageLimit | 1.52V | 1.52V |
	#| AcLoadline     | 2.1   | 3.1   |
	#| DcLoadline     | 2.1   | 3.1   |
	#+----------------+-------+-------+
	register "domain_vr_config[VR_IA_CORE]" = "{
		.vr_config_enable = 1,
		.psi1threshold = VR_CFG_AMP(20),
		.psi2threshold = VR_CFG_AMP(5),
		.psi3threshold = VR_CFG_AMP(1),
		.psi3enable = 1,
		.psi4enable = 1,
		.imon_slope = 0x0,
		.imon_offset = 0x0,
		.icc_max = VR_CFG_AMP(55),
		.voltage_limit = 1520,
		.ac_loadline = 210,
		.dc_loadline = 210,
	}"

	register "domain_vr_config[VR_GT_UNSLICED]" = "{
		.vr_config_enable = 1,
		.psi1threshold = VR_CFG_AMP(20),
		.psi2threshold = VR_CFG_AMP(5),
		.psi3threshold = VR_CFG_AMP(1),
		.psi3enable = 1,
		.psi4enable = 1,
		.imon_slope = 0x0,
		.imon_offset = 0x0,
		.icc_max = VR_CFG_AMP(35),
		.voltage_limit = 1520,
		.ac_loadline = 310,
		.dc_loadline = 310,
	}"

	# Vendor set Psys Pmax to 30W
	register "power_limits_config" = "{
		.psys_pmax = 30,
	}"

	# TODO
	# Send an extra VR mailbox command for the PS4 exit issue
	register "SendVrMbxCmd" = "2"

	device cpu_cluster 0 on
		device lapic 0 on end
	end

	device domain 0 on
		device pci 00.0 on  end	# Host Bridge
		device pci 02.0 on  end	# Integrated Graphics Device
		device pci 08.0 on  end	# Gaussian Mixture Model
		device pci 14.0 on	# USB xHCI
			register "usb2_ports[0]" = "USB2_PORT_LONG(OC0)"
			register "usb2_ports[1]" = "USB2_PORT_LONG(OC0)"
			register "usb2_ports[2]" = "USB2_PORT_LONG(OC1)"
			register "usb2_ports[3]" = "USB2_PORT_LONG(OC1)"
			register "usb2_ports[4]" = "USB2_PORT_LONG(OC2)" # Debug
		end
		device pci 14.2 on  end	# Thermal Subsystem
		device pci 16.0 on  end	# Management Engine Interface 1
		device pci 17.0 on	# SATA
			register "SataSalpSupport"	= "1"
			register "SataPortsEnable[0]"	= "1"
			register "SataPortsEnable[1]"	= "1"
			register "SataPortsEnable[2]"	= "1"
			# SataPortsDevSlp not supported
		end
		device pci 1d.0 on	# PCI Express Port 9 (COMe 0)
			register "PcieRpEnable[8]" = "1"
		end
		device pci 1d.1 on	# PCI Express Port 10 (COMe 1)
			register "PcieRpEnable[9]" = "1"
		end
		device pci 1d.2 on	# PCI Express Port 11 (COMe 2)
			register "PcieRpEnable[10]" = "1"
		end
		device pci 1f.0 on	# LPC Interface
			register "serirq_mode" = "SERIRQ_CONTINUOUS"

			# EC/kempld at 0xa80/0xa81
			register "gen1_dec" = "0x00000a81"

			chip drivers/pc80/tpm
				device pnp 0c31.0 on end
			end
			chip ec/kontron/kempld
				register "uart[0]" = "{ KEMPLD_UART_3F8, 4 }"
				device generic 0.0 on end # UART #0
			end
		end
		device pci 1f.1 on  end	# P2SB
		device pci 1f.2 on  end	# Power Management Controller
		device pci 1f.4 on	# SMBus
			chip drivers/i2c/nct7802y
				device i2c 0x2e on end
			end
		end
		device pci 1f.5 on  end	# PCH SPI
		device pci 1f.6 on  end	# GbE
	end
end