##
## Compute the location and size of where this firmware image
## (coreboot plus bootloader) will live in the boot rom chip.
##
if USE_FAILOVER_IMAGE
	default ROM_SECTION_SIZE   = FAILOVER_SIZE
	default ROM_SECTION_OFFSET = ( ROM_SIZE - FAILOVER_SIZE )
else
    if USE_FALLBACK_IMAGE
	default ROM_SECTION_SIZE   = FALLBACK_SIZE
	default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE )
    else
	default ROM_SECTION_SIZE   = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE )
	default ROM_SECTION_OFFSET = 0
    end
end

##
## Compute the start location and size size of
## The coreboot bootloader.
##
default PAYLOAD_SIZE            = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)

##
## Compute where this copy of coreboot will start in the boot rom
##
default _ROMBASE      = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )

##
## Compute a range of ROM that can cached to speed up coreboot,
## execution speed.
##
## XIP_ROM_SIZE must be a power of 2.
## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
##
default XIP_ROM_SIZE=65536

if USE_FAILOVER_IMAGE
	default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE)
else
    if USE_FALLBACK_IMAGE
	default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE + FAILOVER_SIZE)
    else
	default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE)
    end
end

arch i386 end 

##
## Build the objects we have code for in this directory.
##

driver mainboard.o

#dir /drivers/si/3114

#needed by irq_tables and mptable and acpi_tables
object get_bus_conf.o

if HAVE_MP_TABLE 
	object mptable.o 
end

if HAVE_PIRQ_TABLE 
	object irq_tables.o 
end

#if HAVE_ACPI_TABLES
#       object acpi_tables.o
#       object fadt.o
#       if SB_HT_CHAIN_ON_BUS0
#               object dsdt_bus0.o
#       else
#               object dsdt.o
#       end
#       object ssdt.o
#       if ACPI_SSDTX_NUM
#                if SB_HT_CHAIN_ON_BUS0
#                 object ssdt2_bus0.o
#                else
#                 object ssdt2.o
#                end
#       end
#end

if HAVE_ACPI_TABLES
        object acpi_tables.o
        object fadt.o
	makerule dsdt.c
		depends "$(MAINBOARD)/dx/dsdt_lb.dsl"
		action  "iasl -p $(PWD)/dsdt_lb -tc $(MAINBOARD)/dx/dsdt_lb.dsl"
		action  "mv dsdt_lb.hex dsdt.c"
	end
        object ./dsdt.o

	#./ssdt.o is moved to northbridge/amd/amdk8/Config.lb
	
        if ACPI_SSDTX_NUM
            makerule ssdt2.c
                        depends "$(MAINBOARD)/dx/pci2.asl"
                        action  "iasl -p $(PWD)/pci2 -tc $(MAINBOARD)/dx/pci2.asl"
                        action  "perl -pi -e 's/AmlCode/AmlCode_ssdt2/g' pci2.hex"
                        action  "mv pci2.hex ssdt2.c"
            end
            object ./ssdt2.o
            makerule ssdt3.c
                        depends "$(MAINBOARD)/dx/pci3.asl"
                        action  "iasl -p $(PWD)/pci3 -tc $(MAINBOARD)/dx/pci3.asl"
                        action  "perl -pi -e 's/AmlCode/AmlCode_ssdt3/g' pci3.hex"
                        action  "mv pci3.hex ssdt3.c"
            end
            object ./ssdt3.o
            makerule ssdt4.c
                        depends "$(MAINBOARD)/dx/pci4.asl"
                        action  "iasl -p $(PWD)/pci4 -tc $(MAINBOARD)/dx/pci4.asl"
                        action  "perl -pi -e 's/AmlCode/AmlCode_ssdt4/g' pci4.hex"
                        action  "mv pci4.hex ssdt4.c"
            end
            object ./ssdt4.o
            makerule ssdt5.c
                        depends "$(MAINBOARD)/dx/pci5.asl"
                        action  "iasl -p $(PWD)/pci5 -tc $(MAINBOARD)/dx/pci5.asl"
                        action  "perl -pi -e 's/AmlCode/AmlCode_ssdt5/g' pci5.hex"
                        action  "mv pci5.hex ssdt5.c"
            end
            object ./ssdt5.o
        end
end

if USE_DCACHE_RAM

	if CONFIG_USE_INIT
		# compile cache_as_ram.c to auto.o
		makerule ./cache_as_ram_auto.o
		        depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
		        action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@" 
		end

	else   
		#compile cache_as_ram.c to auto.inc 
		makerule ./cache_as_ram_auto.inc
		        depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
		        action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"         
		        action "perl -e 's/.rodata/.rom.data/g' -pi $@"
		        action "perl -e 's/.text/.section .rom.text/g' -pi $@"
		end

	end
end

if USE_FAILOVER_IMAGE
else
    if CONFIG_AP_CODE_IN_CAR
	makerule ./apc_auto.o
		depends "$(MAINBOARD)/apc_auto.c option_table.h"
		action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/apc_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
	end
	ldscript /arch/i386/init/ldscript_apc.lb
    end
end

##
## Build our 16 bit and 32 bit coreboot entry code
##

if HAVE_FAILOVER_BOOT
    if USE_FAILOVER_IMAGE
	mainboardinit cpu/x86/16bit/entry16.inc
	ldscript /cpu/x86/16bit/entry16.lds
    end
else
    if USE_FALLBACK_IMAGE
	mainboardinit cpu/x86/16bit/entry16.inc
	ldscript /cpu/x86/16bit/entry16.lds
    end
end

mainboardinit cpu/x86/32bit/entry32.inc
if USE_DCACHE_RAM
        if CONFIG_USE_INIT
                ldscript /cpu/x86/32bit/entry32.lds
        end

        if CONFIG_USE_INIT
                ldscript /cpu/amd/car/cache_as_ram.lds
        end
end

##
## Build our reset vector (This is where coreboot is entered)
##
if HAVE_FAILOVER_BOOT
    if USE_FAILOVER_IMAGE 
	mainboardinit cpu/x86/16bit/reset16.inc 
	ldscript /cpu/x86/16bit/reset16.lds 
    else
	mainboardinit cpu/x86/32bit/reset32.inc 
	ldscript /cpu/x86/32bit/reset32.lds 
    end
else
    if USE_FALLBACK_IMAGE 
	mainboardinit cpu/x86/16bit/reset16.inc 
	ldscript /cpu/x86/16bit/reset16.lds 
    else
	mainboardinit cpu/x86/32bit/reset32.inc 
	ldscript /cpu/x86/32bit/reset32.lds 
    end
end

##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds

if USE_DCACHE_RAM
	##
	## Setup Cache-As-Ram
	##
	mainboardinit cpu/amd/car/cache_as_ram.inc
end

###
### This is the early phase of coreboot startup 
### Things are delicate and we test to see if we should
### failover to another image.
###
if HAVE_FAILOVER_BOOT
    if USE_FAILOVER_IMAGE
	if USE_DCACHE_RAM
		ldscript /arch/i386/lib/failover_failover.lds
	end
    end
else
    if USE_FALLBACK_IMAGE
	if USE_DCACHE_RAM
		ldscript /arch/i386/lib/failover.lds
	end
    end
end

###
### O.k. We aren't just an intermediary anymore!
###

##
## Setup RAM
##
if USE_DCACHE_RAM

	if CONFIG_USE_INIT
		initobject cache_as_ram_auto.o
	else
		mainboardinit ./cache_as_ram_auto.inc
	end

end

##
## Include the secondary Configuration files 
##
if CONFIG_CHIP_NAME
	config chip.h
end

dir /southbridge/amd/amd8132

chip northbridge/amd/amdk8/root_complex
        device apic_cluster 0 on
                chip cpu/amd/socket_940
                        device apic 0 on end
                end
        end
	device pci_domain 0 on
		chip northbridge/amd/amdk8
			device pci 18.0 on end
			device pci 18.0 on end
			device pci 18.0 on #  northbridge 
				chip southbridge/amd/amd8131
					# the on/off keyword is mandatory
					device pci 0.0 on end
					device pci 0.1 on end
					device pci 1.0 on end
					device pci 1.1 on end
				end
				chip southbridge/amd/amd8111
					# this "device pci 0.0" is the parent the next one
					# PCI bridge
					device pci 0.0 on
						device pci 0.0 on end
						device pci 0.1 on end
						device pci 0.2 off end
						device pci 1.0 off end
                                                #chip drivers/pci/onboard
                                                #        device pci 6.0 on end
						#	register "rom_address" = "0xfff80000"
                                                #end
					end
					device pci 1.0 on
						chip superio/winbond/w83627hf
							device pnp 2e.0 off #  Floppy
                	                 			io 0x60 = 0x3f0
                	                			irq 0x70 = 6
                	                			drq 0x74 = 2
							end
                	        			device pnp 2e.1 off #  Parallel Port
                	                 			io 0x60 = 0x378
                	                			irq 0x70 = 7
							end
                	        			device pnp 2e.2 on #  Com1
                	                 			io 0x60 = 0x3f8
                	                			irq 0x70 = 4
							end
                	        			device pnp 2e.3 off #  Com2
                	                 			io 0x60 = 0x2f8
                	                			irq 0x70 = 3
							end
                	        			device pnp 2e.5 on #  Keyboard
                	                 			io 0x60 = 0x60
                	                 			io 0x62 = 0x64
                	                			irq 0x70 = 1
								irq 0x72 = 12
							end
                	        			device pnp 2e.6 off #  CIR
								io 0x60 = 0x100
							end
                	        			device pnp 2e.7 off #  GAME_MIDI_GIPO1
								io 0x60 = 0x220
								io 0x62 = 0x300
								irq 0x70 = 9
							end						
							device pnp 2e.8 on #  GPIO2
								io 0x07 = 0x08ff
								io 0x30 = 0x01ff
								io 0x2b = 0xd0ff
								io 0xf0 = 0xef16
							end
                	        			device pnp 2e.9 off end #  GPIO3
                	        			device pnp 2e.a off end #  ACPI
                	        			device pnp 2e.b on #  HW Monitor
 					 			io 0x60 = 0x290
								irq 0x70 = 5
                					end
						end
					end
					device pci 1.1 on end
					device pci 1.2 on end
					device pci 1.3 on
						chip drivers/generic/generic #dimm 0-0-0
							device i2c 50 on end
						end
						chip drivers/generic/generic #dimm 0-0-1
							device i2c 51 on end
						end
						chip drivers/generic/generic #dimm 0-1-0
							device i2c 52 on end
						end
						chip drivers/generic/generic #dimm 0-1-1
							device i2c 53 on end
						end
						chip drivers/generic/generic #dimm 1-0-0
							device i2c 54 on end
						end
						chip drivers/generic/generic #dimm 1-0-1
							device i2c 55 on end
						end
						chip drivers/generic/generic #dimm 1-1-0
							device i2c 56 on end
						end
						chip drivers/generic/generic #dimm 1-1-1
							device i2c 57 on end
						end
					end # acpi
					device pci 1.5 off end
					device pci 1.6 off end
                	                register "ide0_enable" = "1"
                	                register "ide1_enable" = "1"
				end
			end #  device pci 18.0

			device pci 18.1 on end
			device pci 18.2 on end
			device pci 18.3 on end
		end

	end #pci_domain
#        chip drivers/generic/debug
#        	device pnp 0.0 off end # chip name
#                device pnp 0.1 on end # pci_regs_all
#                device pnp 0.2 off end # mem
#                device pnp 0.3 off end # cpuid
#                device pnp 0.4 off end # smbus_regs_all
#                device pnp 0.5 off end # dual core msr
#                device pnp 0.6 off end # cache size
#                device pnp 0.7 off end # tsc
#       end

end