#include #include #include #include #include #include #include #include #include #include #include "../../../northbridge/amd/amdk8/northbridge.h" #include "../../../northbridge/amd/amdk8/cpu_rev.c" #include "chip.h" #include "pc80/mc146818rtc.h" #undef DEBUG #define DEBUG 0 #if DEBUG static void debug_init(device_t dev) { unsigned bus; unsigned devfn; #if 0 for(bus = 0; bus < 256; bus++) { for(devfn = 0; devfn < 256; devfn++) { int i; dev = dev_find_slot(bus, devfn); if (!dev) { continue; } if (!dev->enabled) { continue; } printk_info("%02x:%02x.%0x aka %s\n", bus, devfn >> 3, devfn & 7, dev_path(dev)); for(i = 0; i < 256; i++) { if ((i & 0x0f) == 0) { printk_info("%02x:", i); } printk_info(" %02x", pci_read_config8(dev, i)); if ((i & 0x0f) == 0xf) { printk_info("\n"); } } printk_info("\n"); } } #endif #if 0 msr_t msr; unsigned index; unsigned eax, ebx, ecx, edx; index = 0x80000007; printk_debug("calling cpuid 0x%08x\n", index); asm volatile( "cpuid" : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) : "a" (index) ); printk_debug("cpuid[%08x]: %08x %08x %08x %08x\n", index, eax, ebx, ecx, edx); if (edx & (3 << 1)) { index = 0xC0010042; printk_debug("Reading msr: 0x%08x\n", index); msr = rdmsr(index); printk_debug("msr[0x%08x]: 0x%08x%08x\n", index, msr.hi, msr.hi); } #endif } static void debug_noop(device_t dummy) { } static struct device_operations debug_operations = { .read_resources = debug_noop, .set_resources = debug_noop, .enable_resources = debug_noop, .init = debug_init, }; static unsigned int scan_root_bus(device_t root, unsigned int max) { struct device_path path; device_t debug; max = root_dev_scan_bus(root, max); path.type = DEVICE_PATH_PNP; path.u.pnp.port = 0; path.u.pnp.device = 0; debug = alloc_dev(&root->link[1], &path); debug->ops = &debug_operations; return max; } #endif #if 0 static void handle_smbus_error(int value, const char *msg) { if (value >= 0) { return; } switch(value) { case SMBUS_WAIT_UNTIL_READY_TIMEOUT: printk_emerg("SMBUS wait until ready timed out - resetting..."); hard_reset(); break; case SMBUS_WAIT_UNTIL_DONE_TIMEOUT: printk_emerg("SMBUS wait until done timed out - resetting..."); hard_reset(); break; default: die(msg); break; } } #define ADM1026_DEVICE 0x2c /* 0x2e or 0x2d */ #define ADM1026_REG_CONFIG1 0x00 #define CFG1_MONITOR 0x01 #define CFG1_INT_ENABLE 0x02 #define CFG1_INT_CLEAR 0x04 #define CFG1_AIN8_9 0x08 #define CFG1_THERM_HOT 0x10 #define CFT1_DAC_AFC 0x20 #define CFG1_PWM_AFC 0x40 #define CFG1_RESET 0x80 #define ADM1026_REG_CONFIG2 0x01 #define ADM1026_REG_CONFIG3 0x07 #define BILLION 1000000000UL static void verify_cpu_voltage(const char *name, device_t dev, unsigned int reg, unsigned factor, unsigned cpu_volts, unsigned delta) { unsigned nvolts_lo, nvolts_hi; unsigned cpuvolts_hi, cpuvolts_lo; int value; int loops; loops = 1000; do { value = smbus_read_byte(dev, reg); handle_smbus_error(value, "SMBUS read byte failed"); } while ((--loops > 0) && value == 0); /* Convert the byte value to nanoVolts. * My accuracy is nowhere near that good but I don't * have to round so the math is simple. * I can only go up to about 4.2 Volts this way so my range is * limited. */ nvolts_lo = ((unsigned)value * factor); nvolts_hi = nvolts_lo + factor - 1; /* Get the range of acceptable cpu voltage values */ cpuvolts_lo = cpu_volts - delta; cpuvolts_hi = cpu_volts + delta; if ((nvolts_lo < cpuvolts_lo) || (nvolts_hi > cpuvolts_hi)) { printk_emerg("%s at (%u.%09u-%u.%09u)Volts expected %u.%09u+/-%u.%09uVolts\n", name, nvolts_lo/BILLION, nvolts_lo%BILLION, nvolts_hi/BILLION, nvolts_hi%BILLION, cpu_volts/BILLION, cpu_volts%BILLION, delta/BILLION, delta%BILLION); die(""); } printk_info("%s at (%u.%09u-%u.%09u)Volts\n", name, nvolts_lo/BILLION, nvolts_lo%BILLION, nvolts_hi/BILLION, nvolts_hi%BILLION); } static void adm1026_enable_monitoring(device_t dev) { int result; result = smbus_read_byte(dev, ADM1026_REG_CONFIG1); handle_smbus_error(result, "ADM1026: cannot read config1"); result = (result | CFG1_MONITOR) & ~(CFG1_INT_CLEAR | CFG1_RESET); result = smbus_write_byte(dev, ADM1026_REG_CONFIG1, result); handle_smbus_error(result, "ADM1026: cannot write to config1"); result = smbus_read_byte(dev, ADM1026_REG_CONFIG1); handle_smbus_error(result, "ADM1026: cannot reread config1"); if (!(result & CFG1_MONITOR)) { die("ADM1026: monitoring would not enable"); } } static unsigned k8_cpu_volts(void) { unsigned volts = ~0; if (is_cpu_c0()) { volts = 1500000000; } if (is_cpu_b3()) { volts = 1550000000; } return volts; } static void verify_cpu_voltages(device_t dev) { unsigned cpu_volts; unsigned delta; #if 0 delta = 50000000; #else delta = 75000000; #endif cpu_volts = k8_cpu_volts(); if (cpu_volts == ~0) { printk_info("Required cpu voltage unknwon not checking\n"); return; } /* I need to read registers 0x37 == Ain7CPU1 core 0x2d == VcppCPU0 core */ /* CPU1 core * The sensor has a range of 0-2.5V and reports in * 256 distinct steps. */ verify_cpu_voltage("CPU1 Vcore", dev, 0x37, 9765625, cpu_volts, delta); /* CPU0 core * The sensor has range of 0-3.0V and reports in * 256 distinct steps. */ verify_cpu_voltage("CPU0 Vcore", dev, 0x2d, 11718750, cpu_volts, delta); } #define SMBUS_MUX 0x70 static void do_verify_cpu_voltages(void) { device_t smbus_dev; device_t mux, sensor; struct device_path mux_path, sensor_path; int result; int mux_setting; /* Find the smbus controller */ smbus_dev = dev_find_device(0x1022, 0x746b, 0); if (!smbus_dev) { die("SMBUS controller not found\n"); } /* Find the smbus mux */ mux_path.type = DEVICE_PATH_I2C; mux_path.u.i2c.device = SMBUS_MUX; mux = find_dev_path(smbus_dev, &mux_path); if (!mux) { die("SMBUS mux not found\n"); } /* Find the adm1026 sensor */ sensor_path.type = DEVICE_PATH_I2C; sensor_path.u.i2c.device = ADM1026_DEVICE; sensor = find_dev_path(mux, &sensor_path); if (!sensor) { die("ADM1026 not found\n"); } /* Set the mux to see the temperature sensors */ mux_setting = 1; result = smbus_send_byte(mux, mux_setting); handle_smbus_error(result, "SMBUS send byte failed\n"); result = smbus_recv_byte(mux); handle_smbus_error(result, "SMBUS recv byte failed\n"); if (result != mux_setting) { printk_emerg("SMBUS mux would not set to %d\n", mux_setting); die(""); } adm1026_enable_monitoring(sensor); /* It takes 11.38ms to read a new voltage sensor value */ mdelay(12); /* Read the cpu voltages and make certain everything looks sane */ verify_cpu_voltages(sensor); } #else #define do_verify_cpu_voltages() do {} while(0) #endif static void fixup_aruma(void) { msr_t msr; /* bit 6 (0x40) in MSR 0xC0010015 * disables the TLB cache flush filter */ msr=rdmsr(0xC0010015); msr.lo |= 0x40; wrmsr(0xC0010015, msr); } static void mainboard_init(device_t dev) { root_dev_init(dev); do_verify_cpu_voltages(); printk_info("Initializing mainboard specific functions... "); fixup_aruma(); printk_info("ok\n"); } static struct device_operations mainboard_operations = { .read_resources = root_dev_read_resources, .set_resources = root_dev_set_resources, .enable_resources = root_dev_enable_resources, .init = mainboard_init, #if !DEBUG .scan_bus = root_dev_scan_bus, #else .scan_bus = scan_root_bus, #endif .enable = 0, }; static void enable_dev(struct device *dev) { dev->ops = &mainboard_operations; } struct chip_operations mainboard_island_aruma_ops = { .enable_dev = enable_dev, };