/* SPDX-License-Identifier: GPL-2.0-only */ #include <bootblock_common.h> #include <device/mmio.h> #include <device/pci_ops.h> #include <soc/gpio.h> #include <soc/lpc.h> #include <soc/pci_devs.h> /* * return family number and internal pad number in that community * by pad number and which community it is in. */ /* family number in high byte and inner pad number in lowest byte */ void bootblock_mainboard_early_init(void) { uint32_t reg; uint32_t *pad_config_reg; /* Enable the UART hardware for COM1. */ reg = 1; pci_write_config32(PCI_DEV(0, LPC_DEV, 0), UART_CONT, reg); /* * Set up the pads to select the UART function * AD12 SW16(UART1_DATAIN/UART0_DATAIN) - Setting Mode 2 for UART0_RXD * AD10 SW20(UART1_DATAOUT/UART0_DATAOUT) - Setting Mode 2 for UART0_TXD */ pad_config_reg = gpio_pad_config_reg(GP_SOUTHWEST, UART1_RXD_PAD); write32(pad_config_reg, SET_PAD_MODE_SELECTION(PAD_CONFIG0_DEFAULT0, M2)); pad_config_reg = gpio_pad_config_reg(GP_SOUTHWEST, UART1_TXD_PAD); write32(pad_config_reg, SET_PAD_MODE_SELECTION(PAD_CONFIG0_DEFAULT0, M2)); }