chip soc/intel/skylake

	# GPE configuration
	register "gpe0_dw0" = "GPP_C"

	# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
	register "gen2_dec" = "0x000c0201"

	# FSP Configuration
	register "DspEnable" = "1"

	# VR Settings Configuration for 4 Domains
	#+----------------+-------+-------+-------+-------+
	#| Domain/Setting |  SA   |  IA   | GTUS  |  GTS  |
	#+----------------+-------+-------+-------+-------+
	#| Psi1Threshold  | 20A   | 20A   | 20A   | 20A   |
	#| Psi2Threshold  | 5A    | 5A    | 5A    | 5A    |
	#| Psi3Threshold  | 1A    | 1A    | 1A    | 1A    |
	#| Psi3Enable     | 1     | 1     | 1     | 1     |
	#| Psi4Enable     | 1     | 1     | 1     | 1     |
	#| ImonSlope      | 0     | 0     | 0     | 0     |
	#| ImonOffset     | 0     | 0     | 0     | 0     |
	#| IccMax         | 7A    | 34A   | 35A   | 35A   |
	#| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V |
	#+----------------+-------+-------+-------+-------+
	register "domain_vr_config[VR_SYSTEM_AGENT]" = "{
		.vr_config_enable = 1,
		.psi1threshold = VR_CFG_AMP(20),
		.psi2threshold = VR_CFG_AMP(5),
		.psi3threshold = VR_CFG_AMP(1),
		.psi3enable = 1,
		.psi4enable = 1,
		.imon_slope = 0,
		.imon_offset = 0,
		.icc_max = VR_CFG_AMP(7),
		.voltage_limit = 1520
	}"

	# Enable Root ports.
	# PCIE Port 1 x4 -> SLOT1
	register "PcieRpEnable[0]" = "1"
	register "PcieRpClkReqSupport[0]" = "1"
	register "PcieRpClkReqNumber[0]" = "2"
	# RP1, uses CLK SRC 2
	register "PcieRpClkSrcNumber[0]" = "2"

	# PCIE Port 5 x1 -> SLOT2/LAN
	register "PcieRpEnable[4]" = "1"
	register "PcieRpClkReqSupport[4]" = "1"
	register "PcieRpClkReqNumber[4]" = "3"
	# RP5, uses CLK SRC 3
	register "PcieRpClkSrcNumber[4]" = "3"

	# PCIE Port 6 x1 -> SLOT3
	register "PcieRpEnable[5]" = "1"
	register "PcieRpClkReqSupport[5]" = "1"
	register "PcieRpClkReqNumber[5]" = "1"
	# RP6, uses CLK SRC 1
	register "PcieRpClkSrcNumber[5]" = "1"

	# PCIE Port 7 Disabled
	# PCIE Port 8 Disabled
	# PCIE Port 9 x1 -> WLAN
	register "PcieRpEnable[8]" = "1"
	register "PcieRpClkReqSupport[8]" = "1"
	register "PcieRpClkReqNumber[8]" = "5"
	# RP9, uses CLK SRC 5
	register "PcieRpClkSrcNumber[8]" = "5"

	# PCIE Port 10 x1 -> WiGig
	register "PcieRpEnable[9]" = "1"
	register "PcieRpClkReqSupport[9]" = "1"
	register "PcieRpClkReqNumber[9]" = "4"
	# RP10, uses CLK SRC 4
	register "PcieRpClkSrcNumber[9]" = "4"

	register "usb2_ports" = "{
		[0] = USB2_PORT_MAX(OC0),	/* TYPE-A Port */
		[1] = USB2_PORT_MAX(OC2),	/* TYPE-A Port */
		[2] = USB2_PORT_MAX(OC_SKIP),	/* Bluetooth */
		[4] = USB2_PORT_MAX(OC_SKIP),	/* Type-A Port */
		[5] = USB2_PORT_MAX(OC2),	/* TYPE-A Port */
		[6] = USB2_PORT_MAX(OC_SKIP),	/* TYPE-A Port */
		[7] = USB2_PORT_MAX(OC_SKIP),	/* TYPE-A Port */
		[8] = USB2_PORT_MAX(OC_SKIP),	/* TYPE-A Port */
		[9] = USB2_PORT_MAX(OC1),	/* TYPE-A Port */
		[10] = USB2_PORT_MAX(OC_SKIP),	/* TYPE-A Port */
		[11] = USB2_PORT_MAX(OC_SKIP),	/* TYPE-A Port */
	}"

	register "usb3_ports" = "{
		[0] = USB3_PORT_DEFAULT(OC0),		/* TYPE-A Port */
		[1] = USB3_PORT_DEFAULT(OC_SKIP),	/* TYPE-A Port */
		[2] = USB3_PORT_DEFAULT(OC_SKIP),	/* TYPE-A Port */
		[3] = USB3_PORT_DEFAULT(OC1),		/* TYPE-A Port */
	}"

	register "SsicPortEnable" = "1" # Enable SSIC for WWAN

	# Must leave UART0 enabled or SD/eMMC will not work as PCI
	register "SerialIoDevMode" = "{
		[PchSerialIoIndexI2C0]  = PchSerialIoPci,
		[PchSerialIoIndexI2C1]  = PchSerialIoPci,
		[PchSerialIoIndexI2C2]  = PchSerialIoPci,
		[PchSerialIoIndexI2C3]  = PchSerialIoPci,
		[PchSerialIoIndexI2C4]  = PchSerialIoPci,
		[PchSerialIoIndexI2C5]  = PchSerialIoDisabled,
		[PchSerialIoIndexSpi0]  = PchSerialIoDisabled,
		[PchSerialIoIndexSpi1]  = PchSerialIoDisabled,
		[PchSerialIoIndexUart0] = PchSerialIoPci,
		[PchSerialIoIndexUart1] = PchSerialIoDisabled,
		[PchSerialIoIndexUart2] = PchSerialIoSkipInit,
	}"

	device domain 0 on
		device ref imgu		on  end
		device ref cio		on  end
		device ref pcie_rp1	on  end # x4 SLOT1
		device ref pcie_rp5	on  end # x1 SLOT2/LAN
		device ref pcie_rp6	on  end # x1 SLOT3
		device ref pcie_rp9	on  end # x1 WLAN
		device ref pcie_rp10	on  end # x1 WIGIG
		device ref lpc_espi	on
			chip drivers/pc80/tpm
				device pnp 0c31.0 on end
			end
		end
		device ref hda		on  end
	end
end