# SPDX-License-Identifier: GPL-2.0-or-later config BOARD_GOOGLE_BASEBOARD_TREMBYLE def_bool n config BOARD_GOOGLE_BASEBOARD_DALBOZ def_bool n if BOARD_GOOGLE_BASEBOARD_TREMBYLE || BOARD_GOOGLE_BASEBOARD_DALBOZ config BOARD_SPECIFIC_OPTIONS def_bool y select SOC_AMD_COMMON_BLOCK_USE_ESPI select SOC_AMD_PICASSO select SOC_AMD_COMMON_BLOCK_GRAPHICS_ATIF select BOARD_ROMSIZE_KB_16384 select DRIVERS_AMD_I2S_MACHINE_DEV select DISABLE_SPI_FLASH_ROM_SHARING select DRIVERS_GENERIC_GPIO_KEYS select DRIVERS_GENERIC_ALC1015 select DRIVERS_I2C_GENERIC select DRIVERS_I2C_HID select DRIVERS_I2C_SX9324 select EC_GOOGLE_CHROMEEC select EC_GOOGLE_CHROMEEC_AUDIO_CODEC select EC_GOOGLE_CHROMEEC_BOARDID select EC_GOOGLE_CHROMEEC_ESPI select EC_GOOGLE_CHROMEEC_INCLUDE_SSFC_IN_FW_CONFIG select EC_GOOGLE_CHROMEEC_I2C_TUNNEL select EC_GOOGLE_CHROMEEC_SKUID select ELOG select ELOG_BOOT_COUNT select ELOG_GSMI select FW_CONFIG select FW_CONFIG_SOURCE_CHROMEEC_CBI select GFXUMA select GOOGLE_SMBIOS_MAINBOARD_VERSION select MAINBOARD_HAS_CHROMEOS select AMD_SOC_CONSOLE_UART select MAINBOARD_HAS_I2C_TPM_CR50 select MAINBOARD_HAS_TPM2 select PCIEXP_ASPM select PCIEXP_CLK_PM select PCIEXP_COMMON_CLOCK select PCIEXP_L1_SUB_STATE select HAVE_EM100_SUPPORT select SYSTEM_TYPE_LAPTOP select DRIVERS_GENERIC_MAX98357A select HAVE_ACPI_RESUME select DRIVERS_USB_ACPI select DRIVERS_UART_ACPI select DRIVERS_GENERIC_BAYHUB_LV2 config ELOG_BOOT_COUNT_CMOS_OFFSET int default 144 # FMDFILE is set here so that coreboot build picks up this flash map layout # even when CHROMEOS is not selected when building upstream. config FMDFILE default "src/mainboard/\$(CONFIG_MAINBOARD_DIR)/chromeos.fmd" config MAINBOARD_DIR default "google/zork" config VARIANT_DIR string default "ezkinil" if BOARD_GOOGLE_EZKINIL default "morphius" if BOARD_GOOGLE_MORPHIUS default "trembyle" if BOARD_GOOGLE_TREMBYLE default "dalboz" if BOARD_GOOGLE_DALBOZ default "berknip" if BOARD_GOOGLE_BERKNIP default "vilboz" if BOARD_GOOGLE_VILBOZ default "woomax" if BOARD_GOOGLE_WOOMAX default "dirinboz" if BOARD_GOOGLE_DIRINBOZ default "shuboz" if BOARD_GOOGLE_SHUBOZ default "gumboz" if BOARD_GOOGLE_GUMBOZ config MAINBOARD_PART_NUMBER default "Ezkinil" if BOARD_GOOGLE_EZKINIL default "Morphius" if BOARD_GOOGLE_MORPHIUS default "Trembyle" if BOARD_GOOGLE_TREMBYLE default "Dalboz" if BOARD_GOOGLE_DALBOZ default "Berknip" if BOARD_GOOGLE_BERKNIP default "Vilboz" if BOARD_GOOGLE_VILBOZ default "Woomax" if BOARD_GOOGLE_WOOMAX default "Dirinboz" if BOARD_GOOGLE_DIRINBOZ default "Shuboz" if BOARD_GOOGLE_SHUBOZ default "Gumboz" if BOARD_GOOGLE_GUMBOZ config DEVICETREE default "variants/baseboard/devicetree_trembyle.cb" if BOARD_GOOGLE_BASEBOARD_TREMBYLE default "variants/baseboard/devicetree_dalboz.cb" if BOARD_GOOGLE_BASEBOARD_DALBOZ config OVERRIDE_DEVICETREE default "variants/\$(CONFIG_VARIANT_DIR)/overridetree.cb" config MAINBOARD_FAMILY string default "Google_Zork" config ONBOARD_VGA_IS_PRIMARY bool default y config VGA_BIOS default y if USE_AMD_BLOBS config VBOOT select EC_GOOGLE_CHROMEEC_SWITCHES select VBOOT_LID_SWITCH select VBOOT_STARTS_BEFORE_BOOTBLOCK config VBOOT_VBNV_OFFSET hex default 0x2A config CHROMEOS # Use default libpayload config select LP_DEFCONFIG_OVERRIDE if PAYLOAD_DEPTHCHARGE config AMD_FWM_POSITION_INDEX int default 2 config DRIVER_TPM_I2C_BUS hex default 0x03 config DRIVER_TPM_I2C_ADDR hex default 0x50 config PICASSO_FW_A_POSITION hex default 0xFF012040 depends on VBOOT_SLOTS_RW_AB help Location of the AMD firmware in the RW_A region. This is the start of the RW-A region + 64 bytes for the cbfs header. config PICASSO_FW_B_POSITION hex default 0xFF312040 depends on VBOOT_SLOTS_RW_AB help Location of the AMD firmware in the RW_B region. This is the start of the RW-A region + 64 bytes for the cbfs header. config VARIANT_SUPPORTS_PRE_V3_SCHEMATICS bool default y if BOARD_GOOGLE_TREMBYLE default y if BOARD_GOOGLE_EZKINIL default y if BOARD_GOOGLE_MORPHIUS default y if BOARD_GOOGLE_BERKNIP default y if BOARD_GOOGLE_DALBOZ default n help Whether this variant supports pre-v3 version of schematics. Eventually, when a variant moves to a point where it no longer has to support pre-v3 schematics, `default y` entry for it can be dropped. config VARIANT_SUPPORTS_PRE_V3_6_SCHEMATICS bool default y if BOARD_GOOGLE_TREMBYLE default y if BOARD_GOOGLE_EZKINIL default y if BOARD_GOOGLE_MORPHIUS default y if BOARD_GOOGLE_BERKNIP default y if BOARD_GOOGLE_DALBOZ default y if BOARD_GOOGLE_WOOMAX default y if BOARD_GOOGLE_VILBOZ default y if BOARD_GOOGLE_DIRINBOZ default n config VARIANT_MIN_BOARD_ID_V3_6_SCHEMATICS int depends on VARIANT_SUPPORTS_PRE_V3_6_SCHEMATICS default 4 if BOARD_GOOGLE_TREMBYLE default 3 if BOARD_GOOGLE_EZKINIL default 4 if BOARD_GOOGLE_MORPHIUS default 3 if BOARD_GOOGLE_BERKNIP default 3 if BOARD_GOOGLE_DALBOZ default 1 if BOARD_GOOGLE_WOOMAX default 2 if BOARD_GOOGLE_VILBOZ default 2 if BOARD_GOOGLE_DIRINBOZ default 256 help Minimum board version where the variant starts supporting v3.6+ version of reference schematics. config VARIANT_MIN_BOARD_ID_V3_SCHEMATICS int depends on VARIANT_SUPPORTS_PRE_V3_SCHEMATICS default 4 if BOARD_GOOGLE_TREMBYLE default 3 if BOARD_GOOGLE_EZKINIL default 3 if BOARD_GOOGLE_MORPHIUS default 2 if BOARD_GOOGLE_BERKNIP default 3 if BOARD_GOOGLE_DALBOZ default 256 help Minimum board version where the variant starts supporting v3 version of reference schematics. config VARIANT_SUPPORTS_WIFI_POWER_ACTIVE_HIGH bool default y if VARIANT_SUPPORTS_PRE_V3_SCHEMATICS default y if BOARD_GOOGLE_BERKNIP default y if BOARD_GOOGLE_VILBOZ default y if BOARD_GOOGLE_WOOMAX default n help Whether this variant supports active high power enable for WiFi. For pre-v3 schematics, this is always true. There are some variants which used v3 schematics, but did not pick up the change for active low WiFi power enable. Those variants will have to set this config to true. Eventually, when a variant needs to only support v3 schematics with active low power enable for WiFi, `default y` entry for it can be dropped. config VARIANT_MIN_BOARD_ID_WIFI_POWER_ACTIVE_LOW int depends on VARIANT_SUPPORTS_WIFI_POWER_ACTIVE_HIGH default 3 if BOARD_GOOGLE_BERKNIP default 2 if BOARD_GOOGLE_VILBOZ default 1 if BOARD_GOOGLE_WOOMAX default VARIANT_MIN_BOARD_ID_V3_SCHEMATICS help Minimum board version where the variant starts supporting active low power enable for WiFi. config VARIANT_HAS_FPMCU bool default y if BOARD_GOOGLE_BERKNIP default y if BOARD_GOOGLE_MORPHIUS default n help Select y if any SKU of the board has a fingerprint sensor config VARIANT_MAX_BOARD_ID_BROKEN_FMPCU_POWER int default 4 if BOARD_GOOGLE_MORPHIUS default 3 if BOARD_GOOGLE_BERKNIP default 0 help Last board version that needs the extra delay for FPMCU init. config EFS_SPI_READ_MODE int default 0 if EM100 # Normal read mode default 2 # Dual IO (1-1-2) config EFS_SPI_SPEED int default 3 if EM100 # 16.66 MHz default 0 # 66.66 MHz config EFS_SPI_MICRON_FLAG int default 0 config CHROMEOS_WIFI_SAR bool default y if CHROMEOS select DRIVERS_WIFI_GENERIC select DSAR_ENABLE select SAR_ENABLE select USE_SAR select GEO_SAR_ENABLE endif # BOARD_GOOGLE_BASEBOARD_TREMBYLE || BOARD_GOOGLE_BASEBOARD_DALBOZ