chip soc/intel/tigerlake register "DdiPort1Hpd" = "0" register "DdiPort2Hpd" = "0" register "power_limits_config[POWER_LIMITS_U_2_CORE]" = "{ .tdp_pl1_override = 18, .tdp_pl2_override = 51, .tdp_pl4 = 71, }" register "power_limits_config[POWER_LIMITS_U_4_CORE]" = "{ .tdp_pl1_override = 18, .tdp_pl2_override = 51, .tdp_pl4 = 105, }" register "usb2_ports[3]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-A / Type-C Cl register "usb2_ports[8]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-A / Type-C C0 # Disable SRCCLKREQ1# register "PcieClkSrcUsage[1]" = "PCIE_CLK_NOTUSED" device domain 0 on device ref dptf on chip drivers/intel/dptf ## Active Policy register "policies.active" = "{ [0] = {.target = DPTF_CPU, .thresholds = {TEMP_PCT(98, 100),}}, [1] = {.target = DPTF_TEMP_SENSOR_2, .thresholds = {TEMP_PCT(64, 100), TEMP_PCT(60, 90), TEMP_PCT(56, 80), TEMP_PCT(52, 70), TEMP_PCT(47, 60), TEMP_PCT(42, 50), TEMP_PCT(35, 40),}}}" ## Passive Policy register "policies.passive" = "{ [0] = DPTF_PASSIVE(CPU, CPU, 95, 5000), [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 65, 6000), [2] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_0, 65, 6000), [3] = DPTF_PASSIVE(CPU, TEMP_SENSOR_2, 52, 6000), [4] = DPTF_PASSIVE(CPU, TEMP_SENSOR_3, 65, 6000)}" ## Critical Policy register "policies.critical" = "{ [0] = DPTF_CRITICAL(CPU, 100, SHUTDOWN), [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 75, SHUTDOWN), [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 75, SHUTDOWN), [3] = DPTF_CRITICAL(TEMP_SENSOR_2, 75, SHUTDOWN), [4] = DPTF_CRITICAL(TEMP_SENSOR_3, 75, SHUTDOWN)}" ## Power Limits Control # 12-18W PL1 in 200mW increments, avg over 28-32s interval # PL2 is fixed at 51W, avg over 28-32s interval register "controls.power_limits" = "{ .pl1 = {.min_power = 12000, .max_power = 18000, .time_window_min = 28 * MSECS_PER_SEC, .time_window_max = 32 * MSECS_PER_SEC, .granularity = 200,}, .pl2 = {.min_power = 51000, .max_power = 51000, .time_window_min = 28 * MSECS_PER_SEC, .time_window_max = 32 * MSECS_PER_SEC, .granularity = 1000,}}" device generic 0 on end end end device ref tbt_pcie_rp0 on probe DB_USB USB4_GEN3 end device ref tbt_pcie_rp1 on probe DB_USB USB4_GEN2 probe DB_USB USB4_GEN3 end device ref tbt_dma0 on probe DB_USB USB4_GEN2 probe DB_USB USB4_GEN3 chip drivers/intel/usb4/retimer register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H10)" register "dfp[1].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H10)" use tcss_usb3_port1 as dfp[0].typec_port use tcss_usb3_port2 as dfp[1].typec_port device generic 0 on end end end device ref i2c0 on chip drivers/i2c/generic register "hid" = ""10EC5682"" register "name" = ""RT58"" register "desc" = ""Headset Codec"" register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_F8)" # Set the jd_src to RT5668_JD1 for jack detection register "property_count" = "1" register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" register "property_list[0].name" = ""realtek,jd-src"" register "property_list[0].integer" = "1" device i2c 1a on end end chip drivers/i2c/max98373 register "vmon_slot_no" = "0" register "imon_slot_no" = "1" register "uid" = "0" register "desc" = ""Right Speaker Amp"" register "name" = ""MAXR"" device i2c 31 on end end chip drivers/i2c/max98373 register "vmon_slot_no" = "2" register "imon_slot_no" = "3" register "uid" = "1" register "desc" = ""Left Speaker Amp"" register "name" = ""MAXL"" device i2c 32 on end end end device ref i2c1 on chip drivers/i2c/hid register "generic.hid" = ""GDIX0000"" register "generic.desc" = ""Goodix Touchscreen"" register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)" register "generic.detect" = "1" register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)" register "generic.reset_delay_ms" = "120" register "generic.reset_off_delay_ms" = "3" register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)" register "generic.enable_delay_ms" = "12" register "generic.has_power_resource" = "1" register "hid_desc_reg_offset" = "0x01" device i2c 14 on end end chip drivers/i2c/hid register "generic.hid" = ""ELAN90FC"" register "generic.desc" = ""ELAN Touchscreen"" register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)" register "generic.detect" = "1" register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)" register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)" register "generic.reset_delay_ms" = "20" register "generic.has_power_resource" = "1" register "hid_desc_reg_offset" = "0x01" device i2c 10 on end end chip drivers/i2c/generic register "hid" = ""RAYD0001"" register "desc" = ""Raydium Touchscreen"" register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)" register "detect" = "1" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)" register "reset_delay_ms" = "1" register "reset_off_delay_ms" = "2" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)" register "enable_delay_ms" = "10" register "enable_off_delay_ms" = "1" register "has_power_resource" = "1" device i2c 39 on end end chip drivers/generic/gpio_keys register "name" = ""PENH"" # GPP_B3 is the IRQ source, and GPP_E1 is the wake source register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_B3)" register "key.wake_gpe" = "GPE0_DW2_01" register "key.wakeup_route" = "WAKEUP_ROUTE_SCI" register "key.wakeup_event_action" = "EV_ACT_DEASSERTED" register "key.dev_name" = ""EJCT"" register "key.linux_code" = "SW_PEN_INSERTED" register "key.linux_input_type" = "EV_SW" register "key.label" = ""pen_eject"" device generic 0 on end end end device ref i2c2 on chip drivers/i2c/sx9310 register "desc" = ""SAR0 Proximity Sensor"" register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" register "speed" = "I2C_SPEED_FAST" register "uid" = "0" register "cs0_ground" = "0x0" register "combined_sensors_count" = "2" register "combined_sensors[0]" = "1" register "combined_sensors[1]" = "2" register "resolution" = "SX9310_FINEST" register "avg_pos_strength" = "512" register "startup_sensor" = "1" register "proxraw_strength" = "0" device i2c 28 on end end end device ref i2c5 on chip drivers/i2c/generic register "hid" = ""ELAN0000"" register "desc" = ""ELAN Touchpad"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)" register "wake" = "GPE0_DW2_15" register "detect" = "1" device i2c 15 on end end chip drivers/i2c/hid register "generic.hid" = ""SYNA0000"" register "generic.cid" = ""ACPI0C50"" register "generic.desc" = ""Synaptics Touchpad"" register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)" register "generic.wake" = "GPE0_DW2_15" register "generic.detect" = "1" register "hid_desc_reg_offset" = "0x20" device i2c 0x2c on end end end device ref pch_espi on chip ec/google/chromeec use conn0 as mux_conn[0] use conn1 as mux_conn[1] device pnp 0c09.0 on end end end device ref hda on probe AUDIO MAX98357_ALC5682I_I2S probe AUDIO MAX98373_ALC5682I_I2S probe AUDIO MAX98373_ALC5682_SNDW probe AUDIO MAX98373_ALC5682I_I2S_UP4 probe AUDIO MAX98360_ALC5682I_I2S probe AUDIO RT1011_ALC5682I_I2S end device ref pcie_rp9 on chip soc/intel/common/block/pcie/rtd3 register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B2)" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A11)" register "srcclk_pin" = "0" device generic 0 on end end end device ref pmc hidden # The pmc_mux chip driver is a placeholder for the # PMC.MUX device in the ACPI hierarchy. chip drivers/intel/pmc_mux device generic 0 on chip drivers/intel/pmc_mux/conn use usb2_port9 as usb2_port use tcss_usb3_port1 as usb3_port # SBU is fixed, HSL follows CC register "sbu_orientation" = "TYPEC_ORIENTATION_NORMAL" device generic 0 alias conn0 on end end chip drivers/intel/pmc_mux/conn use usb2_port4 as usb2_port use tcss_usb3_port2 as usb3_port # SBU is fixed, HSL follows CC register "sbu_orientation" = "TYPEC_ORIENTATION_NORMAL" device generic 1 alias conn1 on end end end end end device ref north_xhci on chip drivers/usb/acpi device ref tcss_root_hub on chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "group" = "ACPI_PLD_GROUP(3, 2)" device ref tcss_usb3_port1 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C1 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "group" = "ACPI_PLD_GROUP(2, 2)" device ref tcss_usb3_port2 on end end end end end device ref south_xhci on chip drivers/usb/acpi device ref xhci_root_hub on chip drivers/usb/acpi register "desc" = ""USB2 Type-A Port A1 (DB)"" register "type" = "UPC_TYPE_A" register "group" = "ACPI_PLD_GROUP(1, 1)" device ref usb2_port2 on probe DB_USB USB4_GEN3 end end chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C1 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "group" = "ACPI_PLD_GROUP(2, 1)" device ref usb2_port4 on end end chip drivers/usb/acpi register "desc" = ""USB2 Camera"" register "type" = "UPC_TYPE_INTERNAL" device ref usb2_port5 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "group" = "ACPI_PLD_GROUP(3, 1)" device ref usb2_port9 on end end chip drivers/usb/acpi register "desc" = ""USB2 Bluetooth"" register "type" = "UPC_TYPE_INTERNAL" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A13)" device ref usb2_port10 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-A Port A1 (DB)"" register "type" = "UPC_TYPE_USB3_A" register "group" = "ACPI_PLD_GROUP(1, 2)" device ref usb3_port2 on probe DB_USB USB4_GEN3 end end end end end end end