chip soc/intel/tigerlake register "TcssAuxOri" = "1" register "IomTypeCPortPadCfg[0]" = "0x090E000A" register "IomTypeCPortPadCfg[1]" = "0x090E000D" register "DdiPort1Hpd" = "0" register "DdiPort2Hpd" = "0" #+-------------------+---------------------------+ #| Field | Value | #+-------------------+---------------------------+ #| chipset_lockdown | CHIPSET_LOCKDOWN_COREBOOT | #| GSPI0 | cr50 TPM. Early init is | #| | required to set up a BAR | #| | for TPM communication | #| | before memory is up | #| GSPI1 | Fingerprint MCU | #| I2C0 | Audio | #| I2C1 | Touchscreen | #| I2C2 | WLAN, SAR0 | #| I2C3 | Camera, SAR1 | #| I2C5 | Trackpad | #+-------------------+---------------------------+ # Depending on whether we use I2C bus 1 or SPI bus 0 for TPM # communication, that one needs early initialization. register "common_soc_config" = "{ .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, .gspi[0] = { .speed_mhz = 1, .early_init = CONFIG(MAINBOARD_HAS_SPI_TPM_CR50), }, .i2c[0] = { .speed = I2C_SPEED_FAST, }, .i2c[1] = { .speed = I2C_SPEED_FAST, .early_init = CONFIG(MAINBOARD_HAS_I2C_TPM_CR50), }, .i2c[2] = { .speed = I2C_SPEED_FAST, .speed_config[0] = { .speed = I2C_SPEED_FAST, .scl_lcnt = 163, .scl_hcnt = 75, .sda_hold = 36, }, }, .i2c[3] = { .speed = I2C_SPEED_FAST, .speed_config[0] = { .speed = I2C_SPEED_FAST, .scl_lcnt = 153, .scl_hcnt = 75, .sda_hold = 36, }, }, .i2c[5] = { .speed = I2C_SPEED_FAST, .speed_config[0] = { .speed = I2C_SPEED_FAST, .scl_lcnt = 163, .scl_hcnt = 75, .sda_hold = 36, }, }, }" register "HybridStorageMode" = "1" # Acoustic settings register "AcousticNoiseMitigation" = "1" register "SlowSlewRate[VR_DOMAIN_IA]" = "SLEW_FAST_8" register "SlowSlewRate[VR_DOMAIN_GT]" = "SLEW_FAST_8" register "SlowSlewRate[VR_DOMAIN_SA]" = "SLEW_FAST_8" register "SlowSlewRate[VR_DOMAIN_VLCC]" = "SLEW_FAST_8" register "FastPkgCRampDisable[VR_DOMAIN_IA]" = "1" register "FastPkgCRampDisable[VR_DOMAIN_GT]" = "1" register "FastPkgCRampDisable[VR_DOMAIN_SA]" = "1" register "FastPkgCRampDisable[VR_DOMAIN_VLCC]" = "1" device domain 0 on device ref dptf on chip drivers/intel/dptf ## Active Policy register "policies.active" = "{ [0] = {.target = DPTF_CPU, .thresholds = {TEMP_PCT(85, 90), TEMP_PCT(80, 69), TEMP_PCT(75, 56), TEMP_PCT(70, 46), TEMP_PCT(65, 36),}}, [1] = {.target = DPTF_TEMP_SENSOR_0, .thresholds = {TEMP_PCT(53, 90), TEMP_PCT(50, 69), TEMP_PCT(48, 56), TEMP_PCT(45, 46), TEMP_PCT(42, 36),}}, [2] = {.target = DPTF_TEMP_SENSOR_1, .thresholds = {TEMP_PCT(50, 90), TEMP_PCT(47, 69), TEMP_PCT(45, 56), TEMP_PCT(42, 46), TEMP_PCT(39, 36),}}, [3] = {.target = DPTF_TEMP_SENSOR_2, .thresholds = {TEMP_PCT(53, 90), TEMP_PCT(50, 69), TEMP_PCT(48, 56), TEMP_PCT(45, 46), TEMP_PCT(42, 36),}}, [4] = {.target = DPTF_TEMP_SENSOR_3, .thresholds = {TEMP_PCT(53, 90), TEMP_PCT(50, 69), TEMP_PCT(48, 56), TEMP_PCT(45, 46), TEMP_PCT(42, 36),}}}" device generic 0 on end end end device ref ipu on end # IPU 0x9A19 device ref i2c0 on chip drivers/i2c/generic register "hid" = ""10EC5682"" register "name" = ""RT58"" register "desc" = ""Headset Codec"" register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_F8)" # Set the jd_src to RT5668_JD1 for jack detection register "property_count" = "1" register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" register "property_list[0].name" = ""realtek,jd-src"" register "property_list[0].integer" = "1" device i2c 1a on probe AUDIO MAX98357_ALC5682I_I2S probe AUDIO MAX98373_ALC5682I_I2S end end chip drivers/i2c/max98373 register "vmon_slot_no" = "0" register "imon_slot_no" = "1" register "uid" = "0" register "desc" = ""Right Speaker Amp"" register "name" = ""MAXR"" device i2c 31 on probe AUDIO MAX98373_ALC5682I_I2S end end chip drivers/i2c/max98373 register "vmon_slot_no" = "2" register "imon_slot_no" = "3" register "uid" = "1" register "desc" = ""Left Speaker Amp"" register "name" = ""MAXL"" device i2c 32 on probe AUDIO MAX98373_ALC5682I_I2S end end end device ref i2c1 on chip drivers/i2c/hid register "generic.hid" = ""GDIX0000"" register "generic.desc" = ""Goodix Touchscreen"" register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)" register "generic.probed" = "1" register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)" # Parameter T3 >= 10ms register "generic.reset_delay_ms" = "120" # Parameter T2 >= 1ms register "generic.reset_off_delay_ms" = "3" register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)" # Parameter T1 >= 10ms register "generic.enable_delay_ms" = "12" register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E3)" # Parameter T4 >= 1ms register "generic.stop_off_delay_ms" = "1" register "generic.has_power_resource" = "1" register "hid_desc_reg_offset" = "0x01" device i2c 14 on end end chip drivers/i2c/hid register "generic.hid" = ""ELAN90FC"" register "generic.desc" = ""ELAN Touchscreen"" register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)" register "generic.probed" = "1" register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)" register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)" register "generic.reset_delay_ms" = "20" register "generic.has_power_resource" = "1" register "generic.disable_gpio_export_in_crs" = "1" register "hid_desc_reg_offset" = "0x01" device i2c 10 on end end chip drivers/generic/gpio_keys register "name" = ""PENH"" # GPP_B3 is the IRQ source, and GPP_E1 is the wake source register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_B3)" register "key.wake_gpe" = "GPE0_DW2_01" register "key.wakeup_route" = "WAKEUP_ROUTE_SCI" register "key.wakeup_event_action" = "EV_ACT_DEASSERTED" register "key.dev_name" = ""EJCT"" register "key.linux_code" = "SW_PEN_INSERTED" register "key.linux_input_type" = "EV_SW" register "key.label" = ""pen_eject"" device generic 0 on end end chip drivers/i2c/tpm register "hid" = ""GOOG0005"" register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_C21_IRQ)" device i2c 50 off end end end device ref i2c2 on chip drivers/i2c/sx9310 register "desc" = ""SAR0 Proximity Sensor"" register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" register "speed" = "I2C_SPEED_FAST" register "uid" = "0" register "reg_prox_ctrl0" = "0x10" register "reg_prox_ctrl1" = "0x00" register "reg_prox_ctrl2" = "0x84" register "reg_prox_ctrl3" = "0x0e" register "reg_prox_ctrl4" = "0x07" register "reg_prox_ctrl5" = "0xc6" register "reg_prox_ctrl6" = "0x20" register "reg_prox_ctrl7" = "0x0d" register "reg_prox_ctrl8" = "0x8d" register "reg_prox_ctrl9" = "0x43" register "reg_prox_ctrl10" = "0x1f" register "reg_prox_ctrl11" = "0x00" register "reg_prox_ctrl12" = "0x00" register "reg_prox_ctrl13" = "0x00" register "reg_prox_ctrl14" = "0x00" register "reg_prox_ctrl15" = "0x00" register "reg_prox_ctrl16" = "0x00" register "reg_prox_ctrl17" = "0x00" register "reg_prox_ctrl18" = "0x00" register "reg_prox_ctrl19" = "0x00" register "reg_sar_ctrl0" = "0x50" register "reg_sar_ctrl1" = "0x8a" register "reg_sar_ctrl2" = "0x3c" device i2c 28 on end end end device ref i2c5 on chip drivers/i2c/generic register "hid" = ""ELAN0000"" register "desc" = ""ELAN Touchpad"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)" register "wake" = "GPE0_DW2_15" register "probed" = "1" device i2c 15 on end end end device ref hda on chip drivers/generic/max98357a register "hid" = ""MX98357A"" register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)" register "sdmode_delay" = "5" device generic 0 on probe AUDIO MAX98357_ALC5682I_I2S end end chip drivers/intel/soundwire device generic 0 on probe AUDIO MAX98373_ALC5682_SNDW chip drivers/soundwire/alc5682 # SoundWire Link 0 ID 1 register "desc" = ""Headset Codec"" device generic 0.1 on end end chip drivers/soundwire/max98373 # SoundWire Link 1 ID 3 register "desc" = ""Left Speaker Amp"" device generic 1.3 on end end chip drivers/soundwire/max98373 # SoundWire Link 1 ID 7 register "desc" = ""Right Speaker Amp"" device generic 1.7 on end end end end end device ref pch_espi on chip ec/google/chromeec use conn0 as mux_conn[0] use conn1 as mux_conn[1] device pnp 0c09.0 on end end end device ref pcie_rp9 on chip soc/intel/common/block/pcie/rtd3 register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B2)" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A11)" register "srcclk_pin" = "0" device generic 0 on end end end device ref pmc hidden # The pmc_mux chip driver is a placeholder for the # PMC.MUX device in the ACPI hierarchy. chip drivers/intel/pmc_mux device generic 0 on chip drivers/intel/pmc_mux/conn register "usb2_port_number" = "9" register "usb3_port_number" = "1" # SBU & HSL follow CC device generic 0 alias conn0 on end end chip drivers/intel/pmc_mux/conn register "usb2_port_number" = "4" register "usb3_port_number" = "2" device generic 1 alias conn1 on end end end end end device ref north_xhci on chip drivers/usb/acpi device ref tcss_root_hub on chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "group" = "ACPI_PLD_GROUP(4, 2)" device ref tcss_usb3_port1 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C1 (DB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "group" = "ACPI_PLD_GROUP(3, 2)" device ref tcss_usb3_port2 on probe DB_USB USB3_ACTIVE probe DB_USB USB3_NO_A probe DB_USB USB3_PASSIVE probe DB_USB USB4_GEN2 probe DB_USB USB4_GEN3 end end end end end device ref south_xhci on chip drivers/usb/acpi device ref xhci_root_hub on chip drivers/usb/acpi register "desc" = ""USB2 Type-A Port A0 (MLB)"" register "type" = "UPC_TYPE_A" register "group" = "ACPI_PLD_GROUP(1, 1)" device ref usb2_port1 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-A Port A1 (DB)"" register "type" = "UPC_TYPE_A" register "group" = "ACPI_PLD_GROUP(2, 1)" device ref usb2_port2 on probe DB_USB USB3_ACTIVE probe DB_USB USB3_PASSIVE probe DB_USB USB4_GEN2 probe DB_USB USB4_GEN3 end end chip drivers/usb/acpi register "desc" = ""USB2 WWAN"" register "type" = "UPC_TYPE_INTERNAL" device ref usb2_port3 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C1 (DB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "group" = "ACPI_PLD_GROUP(3, 1)" device ref usb2_port4 on probe DB_USB USB3_ACTIVE probe DB_USB USB3_NO_A probe DB_USB USB3_PASSIVE probe DB_USB USB4_GEN2 probe DB_USB USB4_GEN3 end end chip drivers/usb/acpi register "desc" = ""USB2 Camera"" register "type" = "UPC_TYPE_INTERNAL" device ref usb2_port5 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C0 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "group" = "ACPI_PLD_GROUP(4, 1)" device ref usb2_port9 on end end chip drivers/usb/acpi register "desc" = ""USB2 Bluetooth"" register "type" = "UPC_TYPE_INTERNAL" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A13)" device ref usb2_port10 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-A Port A0 (MLB)"" register "type" = "UPC_TYPE_USB3_A" register "group" = "ACPI_PLD_GROUP(1, 2)" device ref usb3_port1 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-A Port A1 (DB)"" register "type" = "UPC_TYPE_USB3_A" register "group" = "ACPI_PLD_GROUP(2, 2)" device ref usb3_port2 on probe DB_USB USB3_ACTIVE probe DB_USB USB3_PASSIVE probe DB_USB USB4_GEN2 probe DB_USB USB4_GEN3 end end chip drivers/usb/acpi register "desc" = ""USB3 WWAN"" register "type" = "UPC_TYPE_INTERNAL" device ref usb3_port3 on end end end end end end end