# SPDX-License-Identifier: GPL-2.0-or-later chip soc/amd/mendocino # Set Package Power Parameters register "stapm_time_constant_s" = "200" device domain 0 on device ref gpp_bridge_a on # Internal GPP Bridge 0 to Bus A device ref xhci_1 on # XHCI1 controller chip drivers/usb/acpi device ref xhci_1_root_hub on # XHCI1 root hub chip drivers/usb/acpi device ref usb3_port3 on # USB 3.1 port3 chip drivers/usb/acpi register "desc" = ""USB3 Type-A Port A1 (DB)"" register "type" = "UPC_TYPE_USB3_A" register "use_custom_pld" = "true" register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, CENTER, ACPI_PLD_GROUP(3, 1))" device usb 3.2 on end end end # USB 3.1 port3 end chip drivers/usb/acpi device ref usb2_port3 on # USB 2 port3 chip drivers/usb/acpi register "desc" = ""USB2 Type-A Port A1 (DB)"" register "type" = "UPC_TYPE_USB3_A" register "use_custom_pld" = "true" register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, CENTER, ACPI_PLD_GROUP(3, 1))" device usb 2.2 on end end end # USB 2 port3 end end # XHCI1 root hub end end # XHCI1 controller end # Internal GPP Bridge 0 to Bus A end # domain device ref i2c_0 on chip drivers/i2c/generic register "hid" = ""ELAN0000"" register "desc" = ""ELAN Touchpad"" register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_40)" register "wake" = "GEVENT_20" register "detect" = "1" device i2c 15 on end end end # I2C0 device ref i2c_1 on chip drivers/i2c/hid register "generic.hid" = ""ELAN9008"" register "generic.desc" = ""ELAN Touchscreen"" register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_29)" register "generic.detect" = "1" register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_131)" register "generic.enable_delay_ms" = "1" register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_136)" register "generic.reset_off_delay_ms" = "2" register "generic.reset_delay_ms" = "20" register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_76)" register "generic.stop_delay_ms" = "300" register "generic.stop_off_delay_ms" = "2" register "generic.has_power_resource" = "1" register "hid_desc_reg_offset" = "0x01" device i2c 10 on end end chip drivers/generic/gpio_keys register "name" = ""PENH"" register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPIO_3)" register "key.dev_name" = ""EJCT"" register "key.wakeup_event_action" = "EV_ACT_DEASSERTED" register "key.linux_code" = "SW_PEN_INSERTED" register "key.linux_input_type" = "EV_SW" register "key.label" = ""pen_eject"" register "key.debounce_interval" = "100" register "key.wakeup_route" = "WAKEUP_ROUTE_GPIO_IRQ" device generic 0 on end end end # I2C1 device ref i2c_2 on chip drivers/i2c/generic register "hid" = ""RTL5682"" register "name" = ""RT58"" register "desc" = ""Realtek RT5682"" register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPIO_90)" register "property_count" = "1" register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" register "property_list[0].name" = ""realtek,jd-src"" register "property_list[0].integer" = "1" device i2c 1a on end end chip drivers/i2c/generic register "hid" = ""10EC1019"" register "desc" = ""Realtek SPK AMP R"" register "uid" = "1" device i2c 29 on end end chip drivers/i2c/generic register "hid" = ""10EC1019"" register "desc" = ""Realtek SPK AMP L"" register "uid" = "2" register "probed" = "1" device i2c 2a on end end end # I2C2 device ref uart_1 on chip drivers/uart/acpi register "name" = ""CRFP"" register "desc" = ""Fingerprint Reader"" register "hid" = "ACPI_DT_NAMESPACE_HID" register "compat_string" = ""google,cros-ec-uart"" register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_24)" register "wake" = "GEVENT_15" register "uart" = "ACPI_UART_RAW_DEVICE(3000000, 64)" register "has_power_resource" = "1" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_12)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_4)" register "enable_delay_ms" = "3" device generic 0 alias fpmcu on end end end # UART1 end # chip soc/amd/mendocino