# SPDX-License-Identifier: GPL-2.0-or-later
fw_config
	field FORM_FACTOR 0
		option FORM_FACTOR_CLAMSHELL 0
	end
	field FP 1
		option FP_ABSENT 1
	end
	field WLAN 2 3
		option WLAN_MT7921LE 0
	end
	field WWAN 4 5
		option WWAN_DIASABLED 0
	end
	field IO_DB 6 7
		option IO_DB_A1_None_C1_ANX7493QN 1
	end
	field AUDIO_DB 8 9
		option AUDIO_DB_C_ALC5682I_A_ALC1019 1
	end
end

chip soc/amd/mendocino

	# Set Package Power Parameters
	# Remove the sustained_power_limit_mW when STT is enabled
	register "sustained_power_limit_mW"              = "15000"

	device domain 0 on
		device ref gpp_bridge_a on  # Internal GPP Bridge 0 to Bus A
			device ref xhci_1 on # XHCI1 controller
				chip drivers/usb/acpi
					device ref xhci_1_root_hub on # XHCI1 root hub
						chip drivers/usb/acpi
							device ref usb3_port3 on # USB 3.1 port3
								chip drivers/usb/hub
									register "desc" = ""USB Hub""
									register "name" = ""RTS5414E""
									register "port_count" = "4"
									device usb 0.0 on # RTS5414E USB3 hub
										chip drivers/usb/acpi
											register "desc" = ""USB3 Type-A Port A0 (MLB)""
											register "type" = "UPC_TYPE_USB3_A"
											register "use_custom_pld" = "true"
											register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, RIGHT, ACPI_PLD_GROUP(2, 2))"
											device usb 3.0 on end
										end
										chip drivers/usb/acpi
											register "desc" = ""USB3 Type-A Port A1 (DB)""
											register "type" = "UPC_TYPE_USB3_A"
											register "use_custom_pld" = "true"
											register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, CENTER, ACPI_PLD_GROUP(3, 1))"
											device usb 3.2 on end
										end
									end # RTS5414E USB3 hub
								end
							end # USB 3.1 port3
						end
						chip drivers/usb/acpi
							device ref usb2_port3 on # USB 2 port3
								chip drivers/usb/hub
									register "desc" = ""USB Hub""
									register "name" = ""RTS5414E""
									register "port_count" = "4"
									device usb 0.0 on # RTS5414E USB2 hub
										chip drivers/usb/acpi
											register "desc" = ""USB2 Type-A Port A0 (MLB)""
											register "type" = "UPC_TYPE_USB3_A"
											register "use_custom_pld" = "true"
											register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, RIGHT, ACPI_PLD_GROUP(2, 2))"
											device usb 2.0 on end
										end
										chip drivers/usb/acpi
											register "desc" = ""USB2 Type-A Port A1 (DB)""
											register "type" = "UPC_TYPE_USB3_A"
											register "use_custom_pld" = "true"
											register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, CENTER, ACPI_PLD_GROUP(3, 1))"
											device usb 2.2 on end
										end
									end # RTS5414E USB2 hub
								end
							end # USB 2 port3
						end
					end # XHCI1 root hub
				end
			end # XHCI1 controller
		end # Internal GPP Bridge 0 to Bus A
	end

	device ref i2c_0 on
		chip drivers/i2c/hid
			register "generic.hid" = ""PIXA2635""
			register "generic.desc" = ""PIXA Touchpad""
			register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_40)"
			#register "generic.irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_40)"
			register "generic.wake" = "GEVENT_20"
			register "generic.detect" = "1"
			register "hid_desc_reg_offset" = "0x01"
			device i2c 15 on end
		end
	end # I2C0

	device ref i2c_2 on
		chip drivers/i2c/generic
			register "hid" = ""RTL5682""
			register "name" = ""RT58""
			register "desc" = ""Realtek RT5682""
			register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPIO_90)"
			register "property_count" = "1"
			register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
			register "property_list[0].name" = ""realtek,jd-src""
			register "property_list[0].integer" = "1"
			device i2c 1a on
				probe AUDIO_DB AUDIO_DB_C_ALC5682I_A_ALC1019
			end
		end
		chip drivers/i2c/generic
			register "hid" = ""10EC1019""
			register "desc" = ""Realtek SPK AMP R""
			register "uid" = "1"
			device i2c 29 on
				probe AUDIO_DB AUDIO_DB_C_ALC5682I_A_ALC1019
			end
		end
		chip drivers/i2c/generic
			register "hid" = ""10EC1019""
			register "desc" = ""Realtek SPK AMP L""
			register "uid" = "2"
			register "probed" = "1"
			device i2c 2a on
				probe AUDIO_DB AUDIO_DB_C_ALC5682I_A_ALC1019
			end
		end
	end # I2C2
end	# chip soc/amd/mendocino