chip soc/intel/skylake
# IGD Displays
register "gfx" = "GMA_STATIC_DISPLAYS(0)"
# Deep Sx states
register "deep_s3_enable_ac" = "0"
register "deep_s3_enable_dc" = "0"
register "deep_s5_enable_ac" = "1"
register "deep_s5_enable_dc" = "1"
register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN | DSX_DIS_AC_PRESENT_PD"
register "eist_enable" = "1"
# GPE configuration
# Note that GPE events called out in ASL code rely on this
# route. i.e. If this route changes then the affected GPE
# offset bits also need to be changed.
register "gpe0_dw0" = "GPP_C"
register "gpe0_dw1" = "GPP_D"
register "gpe0_dw2" = "GPP_E"
# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
register "gen1_dec" = "0x00fc0801"
register "gen2_dec" = "0x000c0201"
# EC memory map range is 0x900-0x9ff
register "gen3_dec" = "0x00fc0901"
# Enable DPTF
register "dptf_enable" = "1"
# Enable S0ix
register "s0ix_enable" = "1"
# Disable Command TriState
register "CmdTriStateDis" = "1"
# FSP Configuration
register "SataSalpSupport" = "0"
register "SataPortsEnable[0]" = "0"
register "DspEnable" = "1"
register "IoBufferOwnership" = "3"
register "SsicPortEnable" = "0"
register "ScsEmmcHs400Enabled" = "1"
register "SkipExtGfxScan" = "1"
register "SaGv" = "SaGv_Enabled"
register "PmConfigSlpS3MinAssert" = "2" # 50ms
register "PmConfigSlpS4MinAssert" = "1" # 1s
register "PmConfigSlpSusMinAssert" = "1" # 500ms
register "PmConfigSlpAMinAssert" = "3" # 2s
register "power_limits_config" = "{
.tdp_pl1_override = 7,
.tdp_pl2_override = 18,
.psys_pmax = 45,
}"
register "tcc_offset" = "10"
# VR Settings Configuration for 4 Domains
#+----------------+-------+-------+-------+-------+
#| Domain/Setting | SA | IA | GTUS | GTS |
#+----------------+-------+-------+-------+-------+
#| Psi1Threshold | 20A | 20A | 20A | 20A |
#| Psi2Threshold | 2A | 2A | 2A | 2A |
#| Psi3Threshold | 1A | 1A | 1A | 1A |
#| Psi3Enable | 1 | 1 | 1 | 1 |
#| Psi4Enable | 1 | 1 | 1 | 1 |
#| ImonSlope | 0 | 0 | 0 | 0 |
#| ImonOffset | 0 | 0 | 0 | 0 |
#| IccMax | Set by SoC code per CPU SKU |
#| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V |
#| AcLoadline | 14.9 | 4 | 5.7 | 4.57 |
#| DcLoadline | 14.2 | 4 | 4.2 | 4.3 |
#+----------------+-------+-------+-------+-------+
register "domain_vr_config[VR_SYSTEM_AGENT]" = "{
.vr_config_enable = 1,
.psi1threshold = VR_CFG_AMP(20),
.psi2threshold = VR_CFG_AMP(2),
.psi3threshold = VR_CFG_AMP(1),
.psi3enable = 1,
.psi4enable = 1,
.imon_slope = 0x0,
.imon_offset = 0x0,
.voltage_limit = 1520,
.ac_loadline = 1490,
.dc_loadline = 1420,
}"
register "domain_vr_config[VR_IA_CORE]" = "{
.vr_config_enable = 1,
.psi1threshold = VR_CFG_AMP(20),
.psi2threshold = VR_CFG_AMP(2),
.psi3threshold = VR_CFG_AMP(1),
.psi3enable = 1,
.psi4enable = 1,
.imon_slope = 0x0,
.imon_offset = 0x0,
.voltage_limit = 1520,
.ac_loadline = 400,
.dc_loadline = 400,
}"
register "domain_vr_config[VR_GT_UNSLICED]" = "{
.vr_config_enable = 1,
.psi1threshold = VR_CFG_AMP(20),
.psi2threshold = VR_CFG_AMP(2),
.psi3threshold = VR_CFG_AMP(1),
.psi3enable = 1,
.psi4enable = 1,
.imon_slope = 0x0,
.imon_offset = 0x0,
.voltage_limit = 1520,
.ac_loadline = 570,
.dc_loadline = 420,
}"
register "domain_vr_config[VR_GT_SLICED]" = "{
.vr_config_enable = 1,
.psi1threshold = VR_CFG_AMP(20),
.psi2threshold = VR_CFG_AMP(2),
.psi3threshold = VR_CFG_AMP(1),
.psi3enable = 1,
.psi4enable = 1,
.imon_slope = 0x0,
.imon_offset = 0x0,
.voltage_limit = 1520,
.ac_loadline = 457,
.dc_loadline = 430,
}"
# PCIe Root port 1 with SRCCLKREQ1#
register "PcieRpEnable[0]" = "1"
register "PcieRpClkReqSupport[0]" = "1"
register "PcieRpClkReqNumber[0]" = "1"
register "PcieRpClkSrcNumber[0]" = "1"
register "PcieRpAdvancedErrorReporting[0]" = "1"
register "PcieRpLtrEnable[0]" = "1"
# Root port 9 (x2)
# PcieRpEnable: Enable root port
# PcieRpClkReqSupport: Enable CLKREQ#
# PcieRpClkReqNumber: Uses SRCCLKREQ2#
# PcieRpClkSrcNumber: Uses 3
# PcieRpAdvancedErrorReporting: Enable Advanced Error Reporting
# PcieRpLtrEnable: Enable Latency Tolerance Reporting Mechanism
register "PcieRpEnable[8]" = "1"
register "PcieRpClkReqSupport[8]" = "1"
register "PcieRpClkReqNumber[8]" = "2"
register "PcieRpClkSrcNumber[8]" = "3"
register "PcieRpAdvancedErrorReporting[8]" = "1"
register "PcieRpLtrEnable[8]" = "1"
# USB 2.0
register "usb2_ports[0]" = "USB2_PORT_LONG(OC0)" # Type-C Port 1
register "usb2_ports[2]" = "USB2_PORT_SHORT(OC_SKIP)" # Bluetooth
register "usb2_ports[4]" = "USB2_PORT_LONG(OC1)" # Type-C Port 2
register "usb2_ports[6]" = "USB2_PORT_LONG(OC_SKIP)" # pogo port
# USB 3.0
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-C Port 2
# Intel Common SoC Config
#+-------------------+---------------------------+
#| Field | Value |
#+-------------------+---------------------------+
#| GSPI0 | cr50 TPM. Early init is |
#| | required to set up a BAR |
#| | for TPM communication |
#| | before memory is up |
#| I2C0 | Touchscreen |
#| I2C1 | Trackpad |
#| I2C3 | Camera |
#| I2C4 | Audio |
#| I2C5 | Rear Camera & SAR |
#| pch_thermal_trip | PCH Trip Temperature |
#+-------------------+---------------------------+
register "common_soc_config" = "{
.i2c[0] = {
.speed = I2C_SPEED_FAST,
.rise_time_ns = 98,
.fall_time_ns = 38,
},
.i2c[1] = {
.speed = I2C_SPEED_FAST,
.speed_config[0] = {
.speed = I2C_SPEED_FAST,
.scl_lcnt = 186,
.scl_hcnt = 93,
.sda_hold = 36,
},
},
.i2c[3] = {
.speed = I2C_SPEED_FAST,
.rise_time_ns = 98,
.fall_time_ns = 38,
},
.i2c[4] = {
.speed = I2C_SPEED_FAST,
.speed_config[0] = {
.speed = I2C_SPEED_FAST,
.scl_lcnt = 176,
.scl_hcnt = 95,
.sda_hold = 36,
}
},
.i2c[5] = {
.speed = I2C_SPEED_FAST,
.rise_time_ns = 98,
.fall_time_ns = 38,
},
.gspi[0] = {
.speed_mhz = 1,
.early_init = 1,
},
.pch_thermal_trip = 75,
}"
# Touchscreen
register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3"
# Trackpad
register "i2c_voltage[1]" = "I2C_VOLTAGE_1V8"
# Front Camera
register "i2c_voltage[3]" = "I2C_VOLTAGE_1V8"
# Audio
register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8"
# Rear Camera & SAR
register "i2c_voltage[5]" = "I2C_VOLTAGE_1V8"
register "SerialIoDevMode" = "{
[PchSerialIoIndexI2C0] = PchSerialIoPci,
[PchSerialIoIndexI2C1] = PchSerialIoPci,
[PchSerialIoIndexI2C2] = PchSerialIoDisabled,
[PchSerialIoIndexI2C3] = PchSerialIoPci,
[PchSerialIoIndexI2C4] = PchSerialIoPci,
[PchSerialIoIndexI2C5] = PchSerialIoPci,
[PchSerialIoIndexSpi0] = PchSerialIoPci,
[PchSerialIoIndexSpi1] = PchSerialIoPci,
[PchSerialIoIndexUart0] = PchSerialIoSkipInit,
[PchSerialIoIndexUart1] = PchSerialIoDisabled,
[PchSerialIoIndexUart2] = PchSerialIoSkipInit,
}"
device cpu_cluster 0 on end
device domain 0 on
device pci 00.0 on end # Host Bridge
device pci 02.0 on end # Integrated Graphics Device
device pci 04.0 on end # SA thermal subsystem
device pci 05.0 on end # SA IMGU
device pci 14.0 on
chip drivers/usb/acpi
register "desc" = ""Root Hub""
register "type" = "UPC_TYPE_HUB"
device usb 0.0 on
chip drivers/usb/acpi
register "desc" = ""USB Type C Port 1""
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
device usb 2.0 on end
end
chip drivers/usb/acpi
register "desc" = ""Bluetooth""
register "type" = "UPC_TYPE_INTERNAL"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E2)"
device usb 2.2 on end
end
chip drivers/usb/acpi
register "desc" = ""USB Type C Port 2""
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
device usb 2.4 on end
end
chip drivers/usb/acpi
register "desc" = ""POGO""
register "type" = "UPC_TYPE_INTERNAL"
device usb 2.6 on end
end
end
end
end # USB xHCI
device pci 14.1 on end # USB xDCI (OTG)
device pci 14.2 on end # Thermal Subsystem
device pci 14.3 on end # Camera
device pci 15.0 on
chip drivers/i2c/hid
register "generic.hid" = ""WCOM50C1""
register "generic.desc" = ""WCOM Digitizer""
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)"
register "generic.speed" = "I2C_SPEED_FAST_PLUS"
register "generic.detect" = "1"
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E11)"
register "generic.reset_delay_ms" = "20"
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C22)"
register "generic.enable_delay_ms" = "1"
register "generic.has_power_resource" = "1"
register "hid_desc_reg_offset" = "0x1"
device i2c 0a on end
end
end # I2C #0 - Touchscreen
device pci 15.1 on
chip drivers/i2c/sx9310
register "desc" = ""Right SAR Proximity Sensor""
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D9_IRQ)"
register "speed" = "I2C_SPEED_FAST"
register "uid" = "0"
device i2c 28 on end
register "cs0_ground" = "0x0"
register "combined_sensors_count" = "3"
register "combined_sensors[0]" = "0"
register "combined_sensors[1]" = "1"
register "combined_sensors[2]" = "2"
register "resolution" = "SX9310_FINEST"
register "avg_pos_strength" = "512"
register "startup_sensor" = "0"
register "proxraw_strength" = "0"
end
end # I2C #1
device pci 15.2 off end # I2C #2
device pci 15.3 on end # I2C #3 - Camera
device pci 16.0 on end # Management Engine Interface 1
device pci 16.1 off end # Management Engine Interface 2
device pci 16.2 off end # Management Engine IDE-R
device pci 16.3 off end # Management Engine KT Redirection
device pci 16.4 off end # Management Engine Interface 3
device pci 17.0 off end # SATA
device pci 19.0 on end # UART #2
device pci 19.1 on
chip drivers/i2c/sx9310
register "desc" = ""Left SAR Proximity Sensor""
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D10_IRQ)"
register "speed" = "I2C_SPEED_FAST"
register "uid" = "1"
device i2c 28 on end
register "cs0_ground" = "0x0"
register "combined_sensors_count" = "3"
register "combined_sensors[0]" = "0"
register "combined_sensors[1]" = "1"
register "combined_sensors[2]" = "2"
register "resolution" = "SX9310_FINEST"
register "avg_pos_strength" = "512"
register "startup_sensor" = "0"
register "proxraw_strength" = "0"
end
end # I2C #5
device pci 19.2 on
chip drivers/i2c/max98373
register "vmon_slot_no" = "4"
register "imon_slot_no" = "5"
register "uid" = "0"
register "desc" = ""RIGHT SPEAKER AMP""
register "name" = ""MAXR""
device i2c 32 on end
end
chip drivers/i2c/max98373
register "vmon_slot_no" = "6"
register "imon_slot_no" = "7"
register "uid" = "1"
register "desc" = ""LEFT SPEAKER AMP""
register "name" = ""MAXL""
device i2c 31 on end
end
end # I2C #4 - Audio
device pci 1c.0 on
chip drivers/wifi/generic
register "wake" = "GPE0_DW2_01"
device pci 00.0 on end
end
end # PCI Express Port 1
device pci 1c.1 off end # PCI Express Port 2
device pci 1c.2 off end # PCI Express Port 3
device pci 1c.3 off end # PCI Express Port 4
device pci 1c.4 off end # PCI Express Port 5
device pci 1c.5 off end # PCI Express Port 6
device pci 1c.6 off end # PCI Express Port 7
device pci 1c.7 off end # PCI Express Port 8
device pci 1d.0 on end # PCI Express Port 9
device pci 1d.1 off end # PCI Express Port 10
device pci 1d.2 off end # PCI Express Port 11
device pci 1d.3 off end # PCI Express Port 12
device pci 1e.0 off end # UART #0
device pci 1e.1 off end # UART #1
device pci 1e.2 on
chip drivers/spi/acpi
register "hid" = "ACPI_DT_NAMESPACE_HID"
register "compat_string" = ""google,cr50""
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E0_IRQ)"
device spi 0 on end
end
end # GSPI #0
device pci 1e.3 on
chip drivers/spi/acpi
register "name" = ""CRFP""
register "hid" = "ACPI_DT_NAMESPACE_HID"
register "uid" = "1"
register "compat_string" = ""google,cros-ec-spi""
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C11_IRQ)"
register "wake" = "GPE0_DW0_09" # GPP_C9
device spi 0 on end
end # FPMCU
end # GSPI #1
device pci 1e.4 on end # eMMC
device pci 1e.5 off end # SDIO
device pci 1e.6 off end # SDCard
device pci 1f.0 on
chip ec/google/chromeec
device pnp 0c09.0 on end
end
end # LPC Interface
device pci 1f.1 on end # P2SB
device pci 1f.2 on end # Power Management Controller
device pci 1f.3 on end # Intel HDA
device pci 1f.4 on end # SMBus
device pci 1f.5 on end # PCH SPI
device pci 1f.6 off end # GbE
end
end