chip northbridge/intel/sandybridge
	# IGD Displays
	register "gfx" = "GMA_STATIC_DISPLAYS(0)"

	# Enable DisplayPort Hotplug with 6ms pulse
	register "gpu_dp_d_hotplug" = "0x06"

	# Enable Panel as eDP and configure power delays
	register "gpu_panel_port_select" = "PANEL_PORT_DP_A"
	register "gpu_panel_power_cycle_delay" = "6"		# 500ms
	register "gpu_panel_power_up_delay" = "2000"		# 200ms
	register "gpu_panel_power_down_delay" = "500"		# 50ms
	register "gpu_panel_power_backlight_on_delay" = "2000"	# 200ms
	register "gpu_panel_power_backlight_off_delay" = "2000"	# 200ms

	# Set backlight PWM values for eDP
	register "gpu_cpu_backlight" = "0x00000200"
	register "gpu_pch_backlight" = "0x04000000"

	register "ec_present" = "1"
	register "ddr3lv_support" = "1"
	# FIXME: Native raminit requires reduced max clock
	register "max_mem_clock_mhz" = "CONFIG(USE_NATIVE_RAMINIT) ? 666 : 800"

	register "usb_port_config" = "{
		{ 0, 3, 0x0000 },
		{ 1, 0, 0x0040 },
		{ 1, 1, 0x0040 },
		{ 1, 3, 0x0040 },
		{ 0, 3, 0x0000 },
		{ 1, 3, 0x0040 },
		{ 0, 3, 0x0000 },
		{ 0, 3, 0x0000 },
		{ 1, 4, 0x0040 },
		{ 1, 4, 0x0040 },
		{ 0, 4, 0x0000 },
		{ 0, 4, 0x0000 },
		{ 0, 4, 0x0000 },
		{ 0, 4, 0x0000 },}"

	device domain 0 on
		subsystemid 0x1ae0 0xc000 inherit
		device ref host_bridge on end # host bridge
		device ref igd on end # vga controller

		chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
			# GPI routing
			#  0 No effect (default)
			#  1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
			#  2 SCI (if corresponding GPIO_EN bit is also set)
			register "alt_gp_smi_en" = "0x0100"
			register "gpi7_routing" = "2"
			register "gpi8_routing" = "1"

			register "sata_port_map" = "0x1"

			register "sata_port0_gen3_tx" = "0x00880a7f"

			# EC range is 0x800-0x9ff
			# Please note: you MUST not change this unless
			# you also change romstage.c:pch_enable_lpc
			register "gen1_dec" = "0x00fc0801"
			register "gen2_dec" = "0x00fc0901"

			# Enable zero-based linear PCIe root port functions
			register "pcie_port_coalesce" = "true"

			register "usb_port_config" = "{
				{ 0, 0, -1 }, /* P0: Empty */
				{ 1, 0, 0 }, /* P1: Left USB 1  (OC0) */
				{ 1, 0, 1 }, /* P2: Left USB 2  (OC1) */
				{ 1, 0, -1 }, /* P3: SDCARD      (no OC) */
				{ 0, 0, -1 }, /* P4: Empty */
				{ 1, 0, -1 }, /* P5: WWAN        (no OC) */
				{ 0, 0, -1 }, /* P6: Empty */
				{ 0, 0, -1 }, /* P7: Empty */
				{ 1, 0, -1 }, /* P8: Camera      (no OC) */
				{ 1, 0, -1 }, /* P9: Bluetooth   (no OC) */
				{ 0, 0, -1 }, /* P10: Empty */
				{ 0, 0, -1 }, /* P11: Empty */
				{ 0, 0, -1 }, /* P12: Empty */
				{ 0, 0, -1 }, /* P13: Empty */
			}"

			device ref mei1 on end # Management Engine Interface 1
			device ref mei2 off end # Management Engine Interface 2
			device ref me_ide_r off end # Management Engine IDE-R
			device ref me_kt off end # Management Engine KT
			device ref gbe off end # Intel Gigabit Ethernet
			device ref ehci2 on end # USB2 EHCI #2
			device ref hda on end # High Definition Audio
			device ref pcie_rp1 off end # PCIe Port #1 (WLAN remapped)
			device ref pcie_rp2 off end # PCIe Port #2
			device ref pcie_rp3 on end # PCIe Port #3 (WLAN actual)
			device ref pcie_rp4 off end # PCIe Port #4
			device ref pcie_rp5 off end # PCIe Port #5
			device ref pcie_rp6 off end # PCIe Port #6
			device ref pcie_rp7 off end # PCIe Port #7
			device ref pcie_rp8 off end # PCIe Port #8
			device ref ehci1 on end # USB2 EHCI #1
			device ref pci_bridge off end # PCI bridge
			device ref lpc on
				chip drivers/pc80/tpm
					device pnp 0c31.0 on end
				end
				chip ec/google/chromeec
					# We only have one init function that
					# we need to call to initialize the
					# keyboard part of the EC.
					device pnp ff.1 on # dummy address
					end
				end
			end # LPC bridge
			device ref sata1 on end # SATA Controller 1
			device ref smbus on end # SMBus
			device ref sata2 off end # SATA Controller 2
			device ref thermal on end # Thermal
		end
	end
end