#
# This file is part of the coreboot project.
#
# Copyright (C) 2015-2017 Advanced Micro Devices, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
chip soc/amd/stoneyridge
	register "spd_addr_lookup" = "
	{
		{ {0xA0, 0x00} }, // socket 0 - Channel 0, slot 0
	}"
	register "dram_clear_on_reset" = "DRAM_CONTENTS_KEEP"
	register "uma_mode" = "UMAMODE_SPECIFIED_SIZE"
	register "uma_size" = "32 * MiB"
	register "lvds_poseq_varybl_to_blon" = "0x5" # in 4ms
	register "lvds_poseq_blon_to_varybl" = "0x5" # in 4ms

	# Enable I2C0 for audio, USB3 hub at 400kHz
	register "i2c[0]" = "{
		.speed = I2C_SPEED_FAST,
		.rise_time_ns = 85,
		.fall_time_ns = 3,
	}"

	# Enable I2C1 for H1 at 400kHz
	register "i2c[1]" = "{
		.early_init = 1,
		.speed = I2C_SPEED_FAST,
		.rise_time_ns = 3,
		.fall_time_ns = 2,
	}"

	# Enable I2C2 for trackpad, pen at 400kHz
	register "i2c[2]" = "{
		.speed = I2C_SPEED_FAST,
		.rise_time_ns = 3,
		.fall_time_ns = 2,
	}"

	# Enable I2C3 for touchscreen at 400kHz
	register "i2c[3]" = "{
		.speed = I2C_SPEED_FAST,
		.rise_time_ns = 16,
		.fall_time_ns = 8,
	}"

	register "i2c_scl_reset" = "GPIO_I2C0_SCL | GPIO_I2C1_SCL | \
				    GPIO_I2C2_SCL | GPIO_I2C3_SCL"

	device cpu_cluster 0 on
		device lapic 10 on end
	end
	device domain 0 on
		device pci 0.0 on  end # Root Complex
		device pci 0.2 off end # IOMMU
		device pci 1.0 on  end # Internal Graphics P2P bridge 0x98e4
		device pci 1.1 on  end # Internal Multimedia
		device pci 2.0 on  end # PCIe Host Bridge
		device pci 2.1 on  end #
		device pci 2.2 on  end #
		device pci 2.3 on  end #
		device pci 2.4 on
			chip drivers/generic/bayhub
				register "power_saving" = "1"
				device pci 00.0 on end
			end
		end #
		device pci 2.5 on  end #
		device pci 8.0 on  end # PSP
		device pci 9.0 on  end # PCIe Host Bridge
		device pci 9.2 on  end # HDA
		device pci 10.0 on  end # xHCI
		device pci 11.0 off  end # SATA
		device pci 12.0 on  end # EHCI
		device pci 14.0 on      # SMbus
		end # SMbus
		device pci 14.3 on
			chip ec/google/chromeec
				device pnp 0c09.0 on end
			end
		end # LPC
		device pci 14.7 on  end # SD
		device pci 18.0 on  end
		device pci 18.1 on  end
		device pci 18.2 on  end
		device pci 18.3 on  end
		device pci 18.4 on  end
		device pci 18.5 on  end
	end #domain
	device mmio 0xfedc2000 on
		chip drivers/generic/adau7002
			device generic 0.0 on end
		end
		chip drivers/i2c/da7219
			register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_14)"
			register "btn_cfg" = "50"
			register "mic_det_thr" = "500"
			register "jack_ins_deb" = "20"
			register "jack_det_rate" = ""32ms_64ms""
			register "jack_rem_deb" = "1"
			register "a_d_btn_thr" = "0xa"
			register "d_b_btn_thr" = "0x16"
			register "b_c_btn_thr" = "0x21"
			register "c_mic_btn_thr" = "0x3e"
			register "btn_avg" = "4"
			register "adc_1bit_rpt" = "1"
			register "micbias_lvl" = "2600"
			register "mic_amp_in_sel" = ""diff""
			register "mclk_name" = ""oscout1""
			device i2c 1a on end
		end
		chip drivers/generic/max98357a
			register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_119)"
			register "sdmode_delay" = "5"
			device generic 0.1 on end
		end
	end
	device mmio 0xfedc3000 on
		chip drivers/i2c/tpm
			register "hid" = ""GOOG0005""
			register "desc" = ""Cr50 TPM""
			register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_9)"
			device i2c 50 on end
		end
	end
	device mmio 0xfedc4000 on
		chip drivers/i2c/generic
			register "hid" = ""ELAN0000""
			register "desc" = ""ELAN Touchpad""
			register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_5)"
			register "wake" = "7"
			register "probed" = "1"
			device i2c 15 on end
		end
		chip drivers/i2c/hid
			register "generic.hid" = ""PNP0C50""
			register "generic.desc" = ""Synaptics Touchpad""
			register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_5)"
			register "generic.wake" = "7"
			register "generic.probed" = "1"
			register "hid_desc_reg_offset" = "0x20"
			device i2c 2c on end
		end
	end
	device mmio 0xfedc5000 on
		chip drivers/i2c/generic
			register "hid" = ""RAYD0001""
			register "desc" = ""Raydium Touchscreen""
			register "probed" = "1"
			register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_11)"
			register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_85)"
			register "reset_delay_ms" = "20"
			register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)"
			register "enable_delay_ms" = "1"
			register "has_power_resource" = "1"
			device i2c 39 on end
		end
		chip drivers/i2c/generic
			register "hid" = ""ELAN0001""
			register "desc" = ""ELAN Touchscreen""
			register "probed" = "1"
			register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_11)"
			register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_85)"
			register "reset_delay_ms" = "20"
			register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)"
			register "enable_delay_ms" = "1"
			register "has_power_resource" = "1"
			device i2c 10 on end
		end
	end
end	#chip soc/amd/stoneyridge