/* SPDX-License-Identifier: GPL-2.0-or-later */ #include #include #include #include static const struct pad_config gpio_table[] = { /* A8 : PEN_GARAGE_DET_L (wake) */ PAD_CFG_GPI_SCI(GPP_A8, NONE, DEEP, EDGE_SINGLE, NONE), /* A10 : FPMCU_PCH_BOOT1 */ PAD_CFG_GPO(GPP_A10, 0, DEEP), /* A18 : ISH_GP0 ==> NC */ PAD_NC(GPP_A18, NONE), /* A19 : ISH_GP1 ==> NC */ PAD_NC(GPP_A19, NONE), /* A20 : ISH_GP2 ==> NC */ PAD_NC(GPP_A20, NONE), /* A22 : ISH_GP4 ==> NC */ PAD_NC(GPP_A22, NONE), /* A23 : ISH_GP5 ==> NC */ PAD_NC(GPP_A23, NONE), /* B19 : GSPI1_CS0# ==> NC */ PAD_NC(GPP_B19, NONE), /* B20 : GSPI1_CLK ==> NC */ PAD_NC(GPP_B20, NONE), /* B21 : GSPI1_MISO ==> NC */ PAD_NC(GPP_B21, NONE), /* B22 : GSPI1_MOSI ==> NC */ PAD_NC(GPP_B22, NONE), /* C1 : SMBDATA ==> NC */ PAD_NC(GPP_C1, NONE), /* C4 : TOUCHSCREEN_DIS_L */ PAD_CFG_GPO(GPP_C4, 0, DEEP), /* C7 : GPP_C7 ==> Touchscreen_INT_L */ PAD_CFG_GPI_APIC(GPP_C7, NONE, PLTRST, LEVEL, INVERT), /* C11 : UART0_CTS# ==> NC */ PAD_NC(GPP_C11, NONE), /* C23 : UART2_CTS# ==> NC */ PAD_NC(GPP_C23, NONE), /* D4 : USI_BASE_REPORT_EN */ PAD_CFG_GPO(GPP_D4, 0, DEEP), /* D10 : GPP_D10 ==> EN_PP3300_DX_BASE_TOUCHSCREEN */ PAD_CFG_GPO(GPP_D10, 0, DEEP), /* D16 : USI_INT_L */ PAD_CFG_GPI_APIC(GPP_D16, NONE, PLTRST, LEVEL, INVERT), /* F0 : GPP_F0 ==> NC */ PAD_NC(GPP_F0, NONE), /* F1 : GPP_F1 ==> NC */ PAD_NC(GPP_F1, NONE), /* F3 : GPP_F3 ==> MEM_STRAP_3 */ PAD_CFG_GPI(GPP_F3, NONE, PLTRST), /* F10 : GPP_F10 ==> MEM_STRAP_2 */ PAD_CFG_GPI(GPP_F10, NONE, PLTRST), /* F11 : EMMC_CMD ==> NC */ PAD_NC(GPP_F11, NONE), /* F20 : EMMC_RCLK ==> NC */ PAD_NC(GPP_F20, NONE), /* F21 : EMMC_CLK ==> NC */ PAD_NC(GPP_F21, NONE), /* F22 : EMMC_RESET# ==> NC */ PAD_NC(GPP_F22, NONE), /* G0 : GPP_G0 ==> NC */ PAD_NC(GPP_G0, NONE), /* G1 : GPP_G1 ==> NC */ PAD_NC(GPP_G1, NONE), /* G2 : GPP_G2 ==> NC */ PAD_NC(GPP_G2, NONE), /* G3 : GPP_G3 ==> NC */ PAD_NC(GPP_G3, NONE), /* G4 : GPP_G4 ==> NC */ PAD_NC(GPP_G4, NONE), /* G5 : GPP_G5 ==> NC */ PAD_NC(GPP_G5, NONE), /* G6 : GPP_G6 ==> NC */ PAD_NC(GPP_G6, NONE), /* H3 : SPKR_PA_EN */ PAD_CFG_GPO(GPP_H3, 1, DEEP), /* H4 : Touchscreen I2C2_SDA */ PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1), /* H5 : Touchscreen I2C2_SCL */ PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1), /* H13 : M2_SKT2_CFG1 ==> SPKR_RST_L */ PAD_CFG_GPO(GPP_H13, 1, DEEP), /* H14 : M2_SKT2_CFG2 ==> TOUCHSCREEN_STOP_L */ PAD_CFG_GPO(GPP_H14, 1, PLTRST), /* H19 : TIMESYNC[0] ==> MEM_STRAP_0 */ PAD_CFG_GPI(GPP_H19, NONE, PLTRST), /* H22 : MEM_STRAP_1 */ PAD_CFG_GPI(GPP_H22, NONE, PLTRST), }; const struct pad_config *override_gpio_table(size_t *num) { *num = ARRAY_SIZE(gpio_table); return gpio_table; } /* * GPIOs configured before ramstage * Note: the Hatch platform's romstage will configure * the MEM_STRAP_* (a.k.a GPIO_MEM_CONFIG_*) pins * as inputs before it reads them, so they are not * needed in this table. */ static const struct pad_config early_gpio_table[] = { /* B15 : H1_SLAVE_SPI_CS_L */ PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1), /* B16 : H1_SLAVE_SPI_CLK */ PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1), /* B17 : H1_SLAVE_SPI_MISO_R */ PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1), /* B18 : H1_SLAVE_SPI_MOSI_R */ PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1), /* C8 : UART_PCH_RX_DEBUG_TX */ PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1), /* C9 : UART_PCH_TX_DEBUG_RX */ PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1), /* C14 : BT_DISABLE_L */ PAD_CFG_GPO(GPP_C14, 0, DEEP), /* PCH_WP_OD */ PAD_CFG_GPI(GPP_C20, NONE, DEEP), /* C21 : H1_PCH_INT_ODL */ PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT), /* C22 : EC_IN_RW_OD */ PAD_CFG_GPI(GPP_C22, NONE, DEEP), /* E1 : M2_SSD_PEDET */ PAD_CFG_NF(GPP_E1, NONE, DEEP, NF1), /* E5 : SATA_DEVSLP1 */ PAD_CFG_NF(GPP_E5, NONE, PLTRST, NF1), /* F2 : MEM_CH_SEL */ PAD_CFG_GPI(GPP_F2, NONE, PLTRST), }; const struct pad_config *variant_early_gpio_table(size_t *num) { *num = ARRAY_SIZE(early_gpio_table); return early_gpio_table; }