chip soc/intel/cannonlake register "power_limits_config" = "{ .tdp_pl1_override = 15, .tdp_pl2_override = 64, }" register "SerialIoDevMode" = "{ [PchSerialIoIndexI2C0] = PchSerialIoPci, [PchSerialIoIndexI2C1] = PchSerialIoPci, [PchSerialIoIndexI2C2] = PchSerialIoPci, [PchSerialIoIndexI2C3] = PchSerialIoPci, [PchSerialIoIndexI2C4] = PchSerialIoPci, [PchSerialIoIndexI2C5] = PchSerialIoPci, [PchSerialIoIndexSPI0] = PchSerialIoPci, [PchSerialIoIndexSPI1] = PchSerialIoPci, [PchSerialIoIndexSPI2] = PchSerialIoDisabled, [PchSerialIoIndexUART0] = PchSerialIoSkipInit, [PchSerialIoIndexUART1] = PchSerialIoDisabled, [PchSerialIoIndexUART2] = PchSerialIoDisabled, }" # No PCIe WiFi register "PcieRpEnable[13]" = "0" # Intel Common SoC Config #+-------------------+---------------------------+ #| Field | Value | #+-------------------+---------------------------+ #| GSPI1 | FP MCU | #| I2C0 | Trackpad | #| I2C1 | Touchscreen | #| I2C4 | Audio | #+-------------------+---------------------------+ register "common_soc_config" = "{ .i2c[0] = { .speed = I2C_SPEED_FAST, .rise_time_ns = 50, .fall_time_ns = 15, .data_hold_time_ns = 330, }, .i2c[1] = { .speed = I2C_SPEED_FAST, .rise_time_ns = 60, .fall_time_ns = 25, }, .i2c[3] = { .speed = I2C_SPEED_FAST, .rise_time_ns = 150, .fall_time_ns = 150, }, .i2c[4] = { .speed = I2C_SPEED_FAST, .rise_time_ns = 120, .fall_time_ns = 120, }, .gspi[0] = { .speed_mhz = 1, .early_init = 1, }, }" device domain 0 on device pci 02.0 on # Integrated Graphics Device register "gfx" = "GMA_DEFAULT_PANEL(0)" end device pci 14.0 on chip drivers/usb/acpi device usb 0.0 on chip drivers/usb/acpi # No Type-A port device usb 2.2 off end end chip drivers/usb/acpi # No Type-A Port device usb 2.3 off end end chip drivers/usb/acpi # No WWAN device usb 2.5 off end end chip drivers/usb/acpi # No WWAN device usb 3.4 off end end end end end # Native SD Card interface unused device pci 14.5 off end device pci 15.0 on chip drivers/i2c/generic register "hid" = ""ELAN0000"" register "desc" = ""ELAN Touchpad"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_A21_IRQ)" register "wake" = "GPE0_DW0_21" device i2c 15 on end end end device pci 15.1 on chip drivers/i2c/hid register "generic.hid" = ""GDIX0000"" register "generic.desc" = ""Goodix Touchscreen"" register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)" register "generic.detect" = "1" register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)" register "generic.reset_delay_ms" = "120" register "generic.reset_off_delay_ms" = "1" register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D9)" register "generic.enable_delay_ms" = "12" register "generic.enable_off_delay_ms" = "10" register "generic.has_power_resource" = "1" register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C4)" register "generic.stop_delay_ms" = "15" register "generic.stop_off_delay_ms" = "5" register "hid_desc_reg_offset" = "0x01" device i2c 5d on end end chip drivers/generic/gpio_keys register "name" = ""PENH"" register "gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A8)" register "key.wake_gpe" = "GPE0_DW0_08" register "key.wakeup_route" = "WAKEUP_ROUTE_SCI" register "key.wakeup_event_action" = "EV_ACT_ASSERTED" register "key.dev_name" = ""EJCT"" register "key.linux_code" = "SW_PEN_INSERTED" register "key.linux_input_type" = "EV_SW" register "key.label" = ""pen_eject"" device generic 0 on end end end # I2C 1 # I2C #2 unused device pci 15.2 off end # I2C #3 unused device pci 15.3 off end device pci 19.0 on chip drivers/i2c/generic register "hid" = ""10EC5682"" register "name" = ""RT58"" register "desc" = ""Realtek RT5682"" register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0)" register "property_count" = "1" # Set the jd_src to RT5668_JD1 for jack detection register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" register "property_list[0].name" = ""realtek,jd-src"" register "property_list[0].integer" = "1" device i2c 1a on end end chip drivers/i2c/rt1011 register "desc" = ""RT1011 Woofer Left Speaker Amp"" register "uid" = "0" register "name" = ""RTWL"" register "r0_calib_key" = ""dsm_calib_r0_0"" register "temperature_calib_key" = ""dsm_calib_temp_0"" device i2c 38 on end end chip drivers/i2c/rt1011 register "desc" = ""RT1011 Woofer Right Speaker Amp"" register "uid" = "1" register "name" = ""RTWR"" register "r0_calib_key" = ""dsm_calib_r0_1"" register "temperature_calib_key" = ""dsm_calib_temp_0"" device i2c 39 on end end chip drivers/i2c/rt1011 register "desc" = ""RT1011 Tweeter Left Speaker Amp"" register "uid" = "2" register "name" = ""RTTL"" register "r0_calib_key" = ""dsm_calib_r0_2"" register "temperature_calib_key" = ""dsm_calib_temp_0"" device i2c 3a on end end chip drivers/i2c/rt1011 register "desc" = ""RT1011 Tweeter Right Speaker Amp"" register "uid" = "3" register "name" = ""RTTR"" register "r0_calib_key" = ""dsm_calib_r0_3"" register "temperature_calib_key" = ""dsm_calib_temp_0"" device i2c 3b on end end end #I2C #4 device pci 1e.3 on chip drivers/spi/acpi register "name" = ""CRFP"" register "hid" = "ACPI_DT_NAMESPACE_HID" register "uid" = "1" register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_A23_IRQ)" register "wake" = "GPE0_DW0_23" device spi 1 on end end # FPMCU end # GSPI #1 device pci 1f.3 on chip drivers/sof register "spkr_tplg" = "rt1011" register "jack_tplg" = "rt5682" register "mic_tplg" = "_2ch_pdm0" device generic 0 on end end end # Intel HDA end end