chip soc/intel/jasperlake # USB Port Configuration register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # Camera # Intel Common SoC Config #+-------------------+---------------------------+ #| Field | Value | #+-------------------+---------------------------+ #| GSPI0 | cr50 TPM. Early init is | #| | required to set up a BAR | #| | for TPM communication | #| | before memory is up | #| I2C0 | Trackpad | #| I2C1 | Digitizer | #| I2C2 | Touchscreen | #| I2C3 | Camera | #| I2C4 | Audio | #+-------------------+---------------------------+ register "common_soc_config" = "{ .gspi[0] = { .speed_mhz = 1, .early_init = 1, }, .i2c[0] = { .speed = I2C_SPEED_FAST, .rise_time_ns = 270, .fall_time_ns = 270, .data_hold_time_ns = 350, }, .i2c[1] = { .speed = I2C_SPEED_FAST, }, .i2c[2] = { .speed = I2C_SPEED_FAST, .rise_time_ns = 200, .fall_time_ns = 200, }, .i2c[3] = { .speed = I2C_SPEED_FAST, }, .i2c[4] = { .speed = I2C_SPEED_FAST, .speed_config[0] = { .speed = I2C_SPEED_FAST, .scl_lcnt = 200, .scl_hcnt = 120, .sda_hold = 36, } }, }" device domain 0 on device pci 05.0 on # IPU - MIPI Camera chip drivers/intel/mipi_camera register "acpi_uid" = "0x50000" register "acpi_name" = ""IPU0"" register "device_type" = "INTEL_ACPI_CAMERA_CIO2" register "cio2_num_ports" = "2" register "cio2_lanes_used" = "{1,4}" register "cio2_lane_endpoint[0]" = ""^I2C3.CAM0"" register "cio2_lane_endpoint[1]" = ""^I2C3.CAM1"" register "cio2_prt[0]" = "0" register "cio2_prt[1]" = "2" device generic 0 on end end end device pci 14.0 on chip drivers/usb/acpi device usb 0.0 on chip drivers/usb/acpi register "desc" = ""Discrete Bluetooth"" register "type" = "UPC_TYPE_INTERNAL" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H19)" device usb 2.4 on end end chip drivers/usb/acpi register "desc" = ""Camera"" register "type" = "UPC_TYPE_INTERNAL" device usb 2.5 on end end chip drivers/usb/acpi register "desc" = ""Integrated Bluetooth"" register "type" = "UPC_TYPE_INTERNAL" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H19)" device usb 2.7 on end end end end end # USB xHCI device pci 15.0 on chip drivers/i2c/generic register "hid" = ""ELAN0000"" register "desc" = ""ELAN Touchpad"" register "irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_B3_IRQ)" register "wake" = "GPE0_DW0_03" register "detect" = "1" device i2c 15 on end end end #I2C 0 device pci 15.2 on chip drivers/i2c/hid register "generic.hid" = ""SIS6496"" register "generic.desc" = ""SIS Touchscreen"" register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)" register "generic.detect" = "1" register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D5)" register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A11)" register "generic.stop_delay_ms" = "100" register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" register "generic.enable_delay_ms" = "7" register "generic.has_power_resource" = "1" register "hid_desc_reg_offset" = "0x00" device i2c 5c on end end chip drivers/i2c/hid register "generic.hid" = ""ELAN9050"" register "generic.desc" = ""ELAN Touchscreen"" register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)" register "generic.detect" = "1" register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D5)" register "generic.reset_delay_ms" = "20" register "generic.reset_off_delay_ms" = "2" register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A11)" register "generic.stop_delay_ms" = "280" register "generic.stop_off_delay_ms" = "2" register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" register "generic.enable_delay_ms" = "1" register "generic.has_power_resource" = "1" register "hid_desc_reg_offset" = "0x01" device i2c 10 on end end end # I2C 2 device pci 15.3 on #I2C #3 CAM0 CAM1 and VCM0 chip drivers/intel/mipi_camera register "acpi_hid" = ""OVTI8856"" register "acpi_uid" = "0" register "acpi_name" = ""CAM1"" register "chip_name" = ""Ov 8856 Camera"" register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" register "ssdb.lanes_used" = "4" register "ssdb.link_used" = "1" register "ssdb.vcm_type" = "0x0C" register "vcm_name" = ""VCM0"" register "num_freq_entries" = "2" register "link_freq[0]" = "360000000" register "link_freq[1]" = "180000000" register "remote_name" = ""IPU0"" register "has_power_resource" = "1" #Controls register "clk_panel.clks[0].clknum" = "1" #IMGCLKOUT_1 register "clk_panel.clks[0].freq" = "1" #19.2 Mhz register "gpio_panel.gpio[0].gpio_num" = "GPP_D13" #power_enable_2p8 register "gpio_panel.gpio[1].gpio_num" = "GPP_D14" #power_enable_1p2 register "gpio_panel.gpio[2].gpio_num" = "GPP_D12" #reset #_ON register "on_seq.ops_cnt" = "5" register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)" register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)" #_OFF register "off_seq.ops_cnt" = "4" register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)" register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" device i2c 10 on end end chip drivers/intel/mipi_camera register "acpi_uid" = "2" register "acpi_name" = ""VCM0"" register "chip_name" = ""DW9768 VCM"" register "device_type" = "INTEL_ACPI_CAMERA_VCM" register "pr0" = ""\\_SB.PCI0.I2C3.CAM1.PRIC"" register "vcm_compat" = ""dongwoon,dw9768"" device i2c 0C on end end chip drivers/intel/mipi_camera register "acpi_uid" = "1" register "acpi_name" = ""NVM0"" register "chip_name" = ""AT24 EEPROM"" register "device_type" = "INTEL_ACPI_CAMERA_NVM" register "pr0" = ""\\_SB.PCI0.I2C3.CAM1.PRIC"" register "nvm_compat" = ""atmel,24c1024"" register "nvm_size" = "0x2800" register "nvm_pagesize" = "0x01" register "nvm_readonly" = "0x01" register "nvm_width" = "0x0E" device i2c 58 on end end chip drivers/intel/mipi_camera register "acpi_hid" = ""OVTI9734"" register "acpi_uid" = "0" register "acpi_name" = ""CAM0"" register "chip_name" = ""Ov 9734 Camera"" register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" register "has_power_resource" = "1" register "ssdb.lanes_used" = "1" register "num_freq_entries" = "1" register "link_freq[0]" = "180000000" register "remote_name" = ""IPU0"" #Controls register "clk_panel.clks[0].clknum" = "0" #IMGCLKOUT_0 register "clk_panel.clks[0].freq" = "1" #19.2 Mhz register "gpio_panel.gpio[0].gpio_num" = "GPP_D13" #power_enable_2p8 register "gpio_panel.gpio[1].gpio_num" = "GPP_D14" #power_enable_1p2 register "gpio_panel.gpio[2].gpio_num" = "GPP_D15" #reset #_ON register "on_seq.ops_cnt" = "5" register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)" register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)" #_OFF register "off_seq.ops_cnt" = "4" register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)" register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" device i2c 36 on end end end device pci 1c.7 on chip drivers/wifi/generic register "wake" = "GPE0_DW2_03" device pci 00.0 on end end end # PCI Express Root Port 8 - WLAN device pci 19.0 on chip drivers/i2c/da7219 register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)" register "btn_cfg" = "50" register "mic_det_thr" = "500" register "jack_ins_deb" = "20" register "jack_det_rate" = ""32ms_64ms"" register "jack_rem_deb" = "1" register "a_d_btn_thr" = "0xa" register "d_b_btn_thr" = "0x16" register "b_c_btn_thr" = "0x21" register "c_mic_btn_thr" = "0x3e" register "btn_avg" = "4" register "adc_1bit_rpt" = "1" register "micbias_lvl" = "2600" register "mic_amp_in_sel" = ""diff"" device i2c 1a on end end end #I2C 4 device pci 1f.3 on chip drivers/generic/max98357a register "hid" = ""MX98360A"" register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D17)" device generic 0 on end end end # Intel HDA end end