chip soc/intel/jasperlake # Intel Common SoC Config #+-------------------+---------------------------+ #| Field | Value | #+-------------------+---------------------------+ #| GSPI0 | cr50 TPM. Early init is | #| | required to set up a BAR | #| | for TPM communication | #| | before memory is up | #| I2C1 | LVDS | #| I2C2 | Touchscreen | #| I2C4 | Audio | #+-------------------+---------------------------+ register "common_soc_config" = "{ .gspi[0] = { .speed_mhz = 1, .early_init = 1, }, .i2c[1] = { .speed = I2C_SPEED_FAST, }, .i2c[2] = { .speed = I2C_SPEED_FAST, .speed_config[0] = { .speed = I2C_SPEED_FAST, .scl_lcnt = 185, .scl_hcnt = 95, } }, .i2c[4] = { .speed = I2C_SPEED_FAST, .speed_config[0] = { .speed = I2C_SPEED_FAST, .scl_lcnt = 185, .scl_hcnt = 95, } }, }" register "disable_external_bypass_vr" = "1" # Does not support external vnn power rail # Power limit config register "power_limits_config[JSL_N4500_6W_CORE]" = "{ .tdp_pl1_override = 7, .tdp_pl2_override = 25, }" register "power_limits_config[JSL_N6000_6W_CORE]" = "{ .tdp_pl1_override = 7, .tdp_pl2_override = 25, }" register "power_limits_config[JSL_N5100_6W_CORE]" = "{ .tdp_pl1_override = 7, .tdp_pl2_override = 25, }" register "tcc_offset" = "5" # TCC of 100C # USB Port Configuration register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # Camera register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # Lan device domain 0 on device pci 04.0 on chip drivers/intel/dptf # Default DPTF Policy for all drawcia boards if not overridden register "options.tsr[0].desc" = ""Ambient"" ## Passive Policy register "policies.passive" = "{ [0] = DPTF_PASSIVE(CPU, CPU, 85, 60000), [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 65, 60000), }" ## Critical Policy register "policies.critical" = "{ [0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN), [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 78, SHUTDOWN), }" register "controls.power_limits" = "{ .pl1 = { .min_power = 6000, .max_power = 6500, .time_window_min = 1 * MSECS_PER_SEC, .time_window_max = 1 * MSECS_PER_SEC, .granularity = 100, }, .pl2 = { .min_power = 25000, .max_power = 25000, .time_window_min = 1 * MSECS_PER_SEC, .time_window_max = 1 * MSECS_PER_SEC, .granularity = 1000, } }" ## Charger Performance Control (Control, mA) register "controls.charger_perf" = "{ [0] = { 255, 3000 }, [1] = { 24, 1500 }, [2] = { 16, 1000 }, [3] = { 8, 500 } }" device generic 0 on end end end # SA Thermal device device pci 14.0 on chip drivers/usb/acpi device usb 0.0 on chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C0"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "group" = "ACPI_PLD_GROUP(1, 1)" device usb 2.0 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-A Port A2"" register "type" = "UPC_TYPE_A" register "group" = "ACPI_PLD_GROUP(2, 1)" device usb 2.1 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-A Port A0"" register "type" = "UPC_TYPE_A" register "group" = "ACPI_PLD_GROUP(2, 2)" device usb 2.2 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-A Port A1"" register "type" = "UPC_TYPE_A" register "group" = "ACPI_PLD_GROUP(2, 3)" device usb 2.3 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-A Port A3"" register "type" = "UPC_TYPE_A" register "group" = "ACPI_PLD_GROUP(2, 4)" device usb 2.4 on end end chip drivers/usb/acpi register "desc" = ""Camera"" register "type" = "UPC_TYPE_INTERNAL" device usb 2.5 on end end chip drivers/usb/acpi register "desc" = ""LAN"" register "type" = "UPC_TYPE_INTERNAL" device usb 2.6 on end end chip drivers/usb/acpi register "desc" = ""Bluetooth"" register "type" = "UPC_TYPE_INTERNAL" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H19)" device usb 2.7 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-C Port C0"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "group" = "ACPI_PLD_GROUP(1, 1)" device usb 3.0 on end end chip drivers/usb/acpi register "desc" = ""LAN"" register "type" = "UPC_TYPE_INTERNAL" device usb 3.1 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-A Port A0"" register "type" = "UPC_TYPE_USB3_A" register "group" = "ACPI_PLD_GROUP(2, 1)" device usb 3.2 on end end chip drivers/usb/acpi register "desc" = ""USB3 Type-A Port A1"" register "type" = "UPC_TYPE_USB3_A" register "group" = "ACPI_PLD_GROUP(2, 2)" device usb 3.3 on end end end end end # USB xHCI device pci 15.0 off end # I2C 0 device pci 15.2 on chip drivers/i2c/hid register "generic.hid" = ""ILTK0001"" register "generic.desc" = ""ILITEK Touchscreen"" register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)" register "generic.detect" = "1" register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D5)" register "generic.reset_delay_ms" = "400" register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" register "generic.enable_delay_ms" = "12" register "generic.wake" = "GPE0_DW2_04" register "generic.has_power_resource" = "1" register "hid_desc_reg_offset" = "0x01" device i2c 41 on end end end # I2C 2 device pci 15.3 off end #I2C 3 device pci 1c.7 on chip drivers/wifi/generic register "wake" = "GPE0_DW2_03" device pci 00.0 on end end end # PCI Express Root Port 8 - WLAN device pci 19.0 on chip drivers/i2c/generic register "hid" = ""RTL5682"" register "name" = ""RT58"" register "desc" = ""Realtek RT5682"" register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)" register "property_count" = "1" register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" register "property_list[0].name" = ""realtek,jd-src"" register "property_list[0].integer" = "1" device i2c 1a on end end end #I2C 4 device pci 1f.3 on chip drivers/generic/alc1015 register "hid" = ""RTL1019"" register "sdb" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D17)" device generic 0 on end end end # Intel HDA end end