fw_config field AUDIO_CODEC_SOURCE 41 43 option AUDIO_CODEC_UNPROVISIONED 0 option AUDIO_CODEC_ALC5682 1 option AUDIO_CODEC_ALC5682I_VS 2 option AUDIO_CODEC_ALC5650 3 end end chip soc/intel/jasperlake # Intel Common SoC Config #+-------------------+---------------------------+ #| Field | Value | #+-------------------+---------------------------+ #| GSPI0 | cr50 TPM. Early init is | #| | required to set up a BAR | #| | for TPM communication | #| | before memory is up | #| I2C0 | Trackpad | #| I2C2 | Touchscreen | #| I2C4 | Audio | #+-------------------+---------------------------+ register "common_soc_config" = "{ .gspi[0] = { .speed_mhz = 1, .early_init = 1, }, .i2c[0] = { .speed = I2C_SPEED_FAST, .rise_time_ns = 260, .fall_time_ns = 50, }, .i2c[2] = { .speed = I2C_SPEED_FAST, .rise_time_ns = 175, .fall_time_ns = 20, }, .i2c[4] = { .speed = I2C_SPEED_FAST, .rise_time_ns = 260, .fall_time_ns = 50, }, }" register "SerialIoI2cMode" = "{ [PchSerialIoIndexI2C0] = PchSerialIoPci, [PchSerialIoIndexI2C1] = PchSerialIoDisabled, [PchSerialIoIndexI2C2] = PchSerialIoPci, [PchSerialIoIndexI2C3] = PchSerialIoDisabled, [PchSerialIoIndexI2C4] = PchSerialIoPci, }" # USB Port Configuration register "usb2_ports[0]" = "{ .enable = 1, .ocpin = OC_SKIP, .tx_bias = USB2_BIAS_0MV, .tx_emp_enable = USB2_DE_EMP_ON_PRE_EMP_ON, .pre_emp_bias = USB2_BIAS_28P15MV, .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, }" # Type-C Port C0 register "usb2_ports[2]" = "{ .enable = 1, .ocpin = OC_SKIP, .tx_bias = USB2_BIAS_0MV, .tx_emp_enable = USB2_DE_EMP_ON_PRE_EMP_ON, .pre_emp_bias = USB2_BIAS_28P15MV, .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, }" # Type-A Port A0 register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # Camera register "usb2_ports[7]" = "{ .enable = 1, .ocpin = OC_SKIP, .pre_emp_bias = USB2_BIAS_11P25MV, .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, }" # Integrated Bluetooth register "tcc_offset" = "8" # TCC of 97C device domain 0 on device pci 04.0 on # Default DPTF Policy for all Dedede boards if not overridden chip drivers/intel/dptf ## Passive Policy register "policies.passive" = "{ [0] = DPTF_PASSIVE(CPU, CPU, 72, 60000), [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 50, 60000) }" ## Critical Policy register "policies.critical" = "{ [0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN), [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 90, SHUTDOWN), [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 80, SHUTDOWN), [3] = DPTF_CRITICAL(TEMP_SENSOR_2, 80, SHUTDOWN) }" ## Power Limits Control register "controls.power_limits" = "{ .pl1 = { .min_power = 5500, .max_power = 6000, .time_window_min = 1 * MSECS_PER_SEC, .time_window_max = 1 * MSECS_PER_SEC, .granularity = 200, }, .pl2 = { .min_power = 20000, .max_power = 20000, .time_window_min = 1 * MSECS_PER_SEC, .time_window_max = 1 * MSECS_PER_SEC, .granularity = 1000, } }" register "options.tsr[0].desc" = ""Charger"" register "options.tsr[1].desc" = ""Vcore"" register "options.tsr[2].desc" = ""Ambient"" device generic 0 on end end end # SA Thermal device device pci 14.0 on chip drivers/usb/acpi device usb 0.0 on chip drivers/usb/acpi register "desc" = ""Camera"" register "type" = "UPC_TYPE_INTERNAL" device usb 2.5 on end end end end end # USB xHCI device pci 15.0 on chip drivers/i2c/generic register "hid" = ""ELAN0000"" register "desc" = ""ELAN Touchpad"" register "irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_B3_IRQ)" register "wake" = "GPE0_DW0_03" register "detect" = "1" device i2c 15 on end end chip drivers/i2c/hid register "generic.hid" = ""SYNA0000"" register "generic.cid" = ""ACPI0C50"" register "generic.desc" = ""Synaptics Touchpad"" register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_B3_IRQ)" register "generic.wake" = "GPE0_DW0_03" register "generic.detect" = "1" register "hid_desc_reg_offset" = "0x20" device i2c 0x2c on end end end device pci 15.2 on chip drivers/i2c/generic register "hid" = ""ELAN0001"" register "desc" = ""ELAN Touchscreen"" register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)" register "detect" = "1" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D5)" register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" register "enable_delay_ms" = "1" register "has_power_resource" = "1" device i2c 10 on end end end # I2C 2 device pci 19.0 on chip drivers/i2c/generic register "hid" = ""10EC5682"" register "name" = ""RT58"" register "desc" = ""Realtek RT5682"" register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)" register "property_count" = "1" register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" register "property_list[0].name" = ""realtek,jd-src"" register "property_list[0].integer" = "1" device i2c 1a on probe AUDIO_CODEC_SOURCE AUDIO_CODEC_ALC5682 probe AUDIO_CODEC_SOURCE AUDIO_CODEC_UNPROVISIONED end end chip drivers/i2c/generic register "hid" = ""RTL5682"" register "name" = ""RT58"" register "desc" = ""Realtek RT5682"" register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)" register "property_count" = "1" register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" register "property_list[0].name" = ""realtek,jd-src"" register "property_list[0].integer" = "1" device i2c 1a on probe AUDIO_CODEC_SOURCE AUDIO_CODEC_ALC5682I_VS end end chip drivers/i2c/generic register "hid" = ""10EC5650"" register "name" = ""RT58"" register "desc" = ""Realtek RT5650"" register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)" register "property_count" = "1" register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" register "property_list[0].name" = ""realtek,jd-mode"" register "property_list[0].integer" = "2" device i2c 1a on probe AUDIO_CODEC_SOURCE AUDIO_CODEC_ALC5650 end end chip drivers/i2c/generic register "hid" = ""10EC1015"" register "desc" = ""Realtek SPK AMP L"" register "uid" = "0" device i2c 28 on probe AUDIO_AMP RT1015_I2C probe AUDIO_AMP UNPROVISIONED end end chip drivers/i2c/generic register "hid" = ""10EC1015"" register "desc" = ""Realtek SPK AMP R"" register "uid" = "1" device i2c 29 on probe AUDIO_AMP RT1015_I2C probe AUDIO_AMP UNPROVISIONED end end end device pci 1f.3 on chip drivers/generic/alc1015 register "sdb" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D17)" device generic 0 on probe AUDIO_AMP RT1015P_AUTO end end end # Intel HDA end end