chip soc/intel/jasperlake # USB Port Configuration register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # User Facing Camera register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # World Facing Camera # Intel Common SoC Config #+-------------------+---------------------------+ #| Field | Value | #+-------------------+---------------------------+ #| GSPI0 | cr50 TPM. Early init is | #| | required to set up a BAR | #| | for TPM communication | #| | before memory is up | #| I2C0 | Trackpad | #| I2C1 | Digitizer | #| I2C2 | Touchscreen | #| I2C3 | TBD | #| I2C4 | Audio | #+-------------------+---------------------------+ register "common_soc_config" = "{ .gspi[0] = { .speed_mhz = 1, .early_init = 1, }, .i2c[0] = { .speed = I2C_SPEED_FAST, .speed_config[0] = { .speed = I2C_SPEED_FAST, .scl_lcnt = 190, .scl_hcnt = 100, .sda_hold = 40, } }, .i2c[1] = { .speed = I2C_SPEED_FAST, }, .i2c[2] = { .speed = I2C_SPEED_FAST, .speed_config[0] = { .speed = I2C_SPEED_FAST, .scl_lcnt = 190, .scl_hcnt = 100, .sda_hold = 40, } }, .i2c[4] = { .speed = I2C_SPEED_FAST, .speed_config[0] = { .speed = I2C_SPEED_FAST, .scl_lcnt = 190, .scl_hcnt = 100, .sda_hold = 40, } }, }" register "SerialIoI2cMode" = "{ [PchSerialIoIndexI2C0] = PchSerialIoPci, [PchSerialIoIndexI2C1] = PchSerialIoPci, [PchSerialIoIndexI2C2] = PchSerialIoPci, [PchSerialIoIndexI2C3] = PchSerialIoDisabled, [PchSerialIoIndexI2C4] = PchSerialIoPci, [PchSerialIoIndexI2C5] = PchSerialIoDisabled, }" register "power_limits_config" = "{ .tdp_pl1_override = 6, .tdp_pl2_override = 12, }" device domain 0 on device pci 04.0 on chip drivers/intel/dptf register "options.tsr[0].desc" = ""Memory"" register "options.tsr[1].desc" = ""CPU"" register "policies.passive" = "{ [0] = DPTF_PASSIVE(CPU, CPU, 90, 5000), [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 80, 6000), [2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 55, 5000)}" register "policies.critical" = "{ [0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN), [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 90, SHUTDOWN), [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 80, SHUTDOWN)}" register "controls.power_limits.pl1" = "{ .min_power = 3000, .max_power = 6000, .time_window_min = 1 * MSECS_PER_SEC, .time_window_max = 1 * MSECS_PER_SEC, .granularity = 125,}" register "controls.power_limits.pl2" = "{ .min_power = 12000, .max_power = 12000, .time_window_min = 1 * MSECS_PER_SEC, .time_window_max = 1 * MSECS_PER_SEC, .granularity = 1000,}" ## Charger Performance Control (Control, mA) register "controls.charger_perf[0]" = "{ 255, 3000 }" register "controls.charger_perf[1]" = "{ 24, 1500 }" register "controls.charger_perf[2]" = "{ 16, 1000 }" register "controls.charger_perf[3]" = "{ 8, 500 }" device generic 0 on end end end # SA Thermal device device pci 14.0 on chip drivers/usb/acpi device usb 0.0 on chip drivers/usb/acpi register "desc" = ""LTE"" register "type" = "UPC_TYPE_INTERNAL" register "group" = "ACPI_PLD_GROUP(2, 2)" register "has_power_resource" = "1" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H17)" register "reset_off_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)" register "enable_delay_ms" = "20" device usb 2.3 on probe DB_PORTS DB_PORTS_LTE_HDMI end end chip drivers/usb/acpi register "desc" = ""Right Type-A Port"" register "type" = "UPC_TYPE_A" register "group" = "ACPI_PLD_GROUP(2, 2)" device usb 2.3 on probe DB_PORTS DB_PORTS_1A_HDMI end end chip drivers/usb/acpi register "desc" = ""User Facing Camera"" register "type" = "UPC_TYPE_INTERNAL" device usb 2.5 on end end chip drivers/usb/acpi register "desc" = ""World Facing Camera"" register "type" = "UPC_TYPE_INTERNAL" device usb 2.6 on end end chip drivers/usb/acpi register "desc" = ""LTE"" register "type" = "UPC_TYPE_INTERNAL" register "group" = "ACPI_PLD_GROUP(2, 2)" device usb 3.3 on probe DB_PORTS DB_PORTS_LTE_HDMI end end chip drivers/usb/acpi register "desc" = ""Right Type-A Port"" register "type" = "UPC_TYPE_USB3_A" register "group" = "ACPI_PLD_GROUP(2, 2)" device usb 3.3 on probe DB_PORTS DB_PORTS_1A_HDMI end end end end end # USB xHCI device pci 15.0 on chip drivers/i2c/hid register "generic.hid" = ""SYNA0000"" register "generic.cid" = ""ACPI0C50"" register "generic.desc" = ""Synaptics Touchpad"" register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_B3_IRQ)" register "generic.wake" = "GPE0_DW0_03" register "generic.detect" = "1" register "hid_desc_reg_offset" = "0x20" device i2c 0x2c on end end chip drivers/i2c/generic register "hid" = ""ELAN0000"" register "desc" = ""ELAN Touchpad"" register "irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_B3_IRQ)" register "wake" = "GPE0_DW0_03" register "detect" = "1" device i2c 15 on end end end # I2C 0 device pci 15.2 on chip drivers/generic/gpio_keys register "name" = ""PENH"" register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_C12)" register "key.wakeup_route" = "WAKEUP_ROUTE_GPIO_IRQ" register "key.wakeup_event_action" = "EV_ACT_DEASSERTED" register "key.dev_name" = ""EJCT"" register "key.linux_code" = "SW_PEN_INSERTED" register "key.linux_input_type" = "EV_SW" register "key.label" = ""pen_eject"" device generic 0 on end end chip drivers/i2c/hid register "generic.hid" = ""GDIX0000"" register "generic.desc" = ""Goodix Touchscreen"" register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)" register "generic.probed" = "1" register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D5)" register "generic.reset_delay_ms" = "180" register "generic.reset_off_delay_ms" = "2" register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A11)" register "generic.stop_delay_ms" = "20" register "generic.stop_off_delay_ms" = "2" register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" register "generic.enable_delay_ms" = "12" register "generic.has_power_resource" = "1" register "generic.disable_gpio_export_in_crs" = "1" register "hid_desc_reg_offset" = "0x01" device i2c 0x5d on end end chip drivers/i2c/hid register "generic.hid" = ""ELAN6915"" register "generic.desc" = ""ELAN Touchscreen"" register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)" register "generic.probed" = "1" register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D5)" register "generic.reset_delay_ms" = "20" register "generic.reset_off_delay_ms" = "2" register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A11)" register "generic.stop_delay_ms" = "280" register "generic.stop_off_delay_ms" = "2" register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" register "generic.enable_delay_ms" = "1" register "generic.has_power_resource" = "1" register "generic.disable_gpio_export_in_crs" = "1" register "hid_desc_reg_offset" = "0x01" device i2c 15 on end end end # I2C 2 device pci 15.3 off end # I2C 3 device pci 19.0 on chip drivers/i2c/generic register "hid" = ""10EC5682"" register "name" = ""RT58"" register "desc" = ""Realtek RT5682"" register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)" register "property_count" = "1" register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" register "property_list[0].name" = ""realtek,jd-src"" register "property_list[0].integer" = "1" device i2c 1a on end end chip drivers/i2c/generic register "hid" = ""10EC1015"" register "desc" = ""Realtek SPK AMP L"" register "uid" = "0" device i2c 28 on probe AUDIO_AMP UNPROVISIONED probe AUDIO_AMP RT1015_I2C end end chip drivers/i2c/generic register "hid" = ""10EC1015"" register "desc" = ""Realtek SPK AMP R"" register "uid" = "1" device i2c 29 on probe AUDIO_AMP UNPROVISIONED probe AUDIO_AMP RT1015_I2C end end end device pci 1f.3 on chip drivers/generic/alc1015 register "sdb" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D17)" device generic 0 on probe AUDIO_AMP RT1015P_AUTO end end end # Intel HDA end end