fw_config field AUDIO_CODEC_SOURCE 41 43 option AUDIO_CODEC_UNPROVISIONED 0 option AUDIO_CODEC_DA7219 1 option AUDIO_CODEC_RT5682 2 option AUDIO_CODEC_CS42l42 3 end end chip soc/intel/jasperlake # USB Port Configuration register "usb2_ports[1]" = "USB2_PORT_EMPTY" # None register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # LTE register "usb2_ports[4]" = "USB2_PORT_EMPTY" # None register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # Camera (UFC) register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # Camera (WFC) register "usb3_ports[1]" = "USB3_PORT_EMPTY" # None register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # LTE register "SerialIoI2cMode" = "{ [PchSerialIoIndexI2C0] = PchSerialIoPci, [PchSerialIoIndexI2C1] = PchSerialIoDisabled, [PchSerialIoIndexI2C2] = PchSerialIoPci, [PchSerialIoIndexI2C3] = PchSerialIoDisabled, [PchSerialIoIndexI2C4] = PchSerialIoPci, [PchSerialIoIndexI2C5] = PchSerialIoDisabled, }" # Intel Common SoC Config #+-------------------+---------------------------+ #| Field | Value | #+-------------------+---------------------------+ #| GSPI0 | cr50 TPM. Early init is | #| | required to set up a BAR | #| | for TPM communication | #| | before memory is up | #| I2C0 | Trackpad | #| I2C1 | | #| I2C2 | Touchscreen | #| I2C3 | | #| I2C4 | Audio | #+-------------------+---------------------------+ register "common_soc_config" = "{ .gspi[0] = { .speed_mhz = 1, .early_init = 1, }, .i2c[0] = { .speed = I2C_SPEED_FAST, }, .i2c[2] = { .speed = I2C_SPEED_FAST, }, .i2c[4] = { .speed = I2C_SPEED_FAST, }, }" device domain 0 on device pci 04.0 on chip drivers/intel/dptf ## Passive Policy register "policies.passive" = "{ [0] = DPTF_PASSIVE(CPU, CPU, 90, 10000), [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 80, 60000), [2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 55, 15000) }" ## Critical Policy register "policies.critical" = "{ [0] = DPTF_CRITICAL(CPU, 120, SHUTDOWN), [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 120, SHUTDOWN), [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 120, SHUTDOWN) }" ## Power Limits Control register "controls.power_limits" = "{ .pl1 = { .min_power = 3000, .max_power = 6000, .time_window_min = 1 * MSECS_PER_SEC, .time_window_max = 1 * MSECS_PER_SEC, .granularity = 200, }, .pl2 = { .min_power = 20000, .max_power = 20000, .time_window_min = 1 * MSECS_PER_SEC, .time_window_max = 1 * MSECS_PER_SEC, .granularity = 1000, } }" device generic 0 on end end end # SA Thermal device device pci 14.0 on chip drivers/usb/acpi device usb 0.0 on chip drivers/usb/acpi device usb 2.1 off end end chip drivers/usb/acpi register "desc" = ""LTE"" register "type" = "UPC_TYPE_INTERNAL" device usb 2.3 on probe LTE LTE_PRESENT end end chip drivers/usb/acpi register "desc" = ""Camera (UFC)"" register "type" = "UPC_TYPE_INTERNAL" device usb 2.5 on end end chip drivers/usb/acpi register "desc" = ""Camera (WFC)"" register "type" = "UPC_TYPE_INTERNAL" device usb 2.6 on end end chip drivers/usb/acpi device usb 3.1 off end end chip drivers/usb/acpi register "desc" = ""LTE"" register "type" = "UPC_TYPE_INTERNAL" register "has_power_resource" = "1" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H17)" register "reset_off_delay_ms" = "10" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)" register "enable_delay_ms" = "20" device usb 3.3 on probe LTE LTE_PRESENT end end end end end # USB xHCI device pci 15.0 on chip drivers/i2c/generic register "hid" = ""ELAN0000"" register "desc" = ""ELAN Touchpad"" register "irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_B3_IRQ)" register "wake" = "GPE0_DW0_03" register "probed" = "1" device i2c 15 on end end chip drivers/i2c/hid register "generic.hid" = ""GXTP7288"" register "generic.desc" = ""Goodix Touchpad"" register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)" register "generic.wake" = "GPE0_DW0_03" register "generic.probed" = "1" register "hid_desc_reg_offset" = "0x20" device i2c 2c on end end end #I2C 0 device pci 15.1 off end # I2C 1 device pci 15.2 on chip drivers/i2c/hid register "generic.hid" = ""WDHT0002"" register "generic.desc" = ""WDT Touchscreen"" register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)" register "generic.probed" = "1" register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D5)" register "generic.reset_delay_ms" = "20" register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A11)" register "generic.stop_delay_ms" = "130" register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" register "generic.enable_delay_ms" = "1" register "generic.has_power_resource" = "1" register "generic.disable_gpio_export_in_crs" = "1" register "hid_desc_reg_offset" = "0x20" device i2c 2c on end end chip drivers/i2c/generic register "hid" = ""ELAN0001"" register "desc" = ""ELAN Touchscreen"" register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_D4_IRQ)" register "probed" = "1" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D5)" register "reset_delay_ms" = "20" register "reset_off_delay_ms" = "2" register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A11)" register "stop_delay_ms" = "280" register "stop_off_delay_ms" = "2" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" register "enable_delay_ms" = "1" register "has_power_resource" = "1" device i2c 10 on end end chip drivers/i2c/hid register "generic.hid" = ""ELAN900C"" register "generic.desc" = ""ELAN Touchscreen"" register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)" register "generic.probed" = "1" register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D5)" register "generic.reset_delay_ms" = "6" register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A11)" register "generic.stop_delay_ms" = "300" register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" register "generic.enable_delay_ms" = "6" register "generic.has_power_resource" = "1" register "hid_desc_reg_offset" = "0x01" device i2c 16 on end end chip drivers/i2c/hid register "generic.hid" = ""GXTP7996"" register "generic.desc" = ""Goodix Touchscreen"" register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)" register "generic.probed" = "1" register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D5)" register "generic.reset_delay_ms" = "100" register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A11)" register "generic.stop_delay_ms" = "300" register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" register "generic.enable_delay_ms" = "10" register "generic.has_power_resource" = "1" register "hid_desc_reg_offset" = "0x01" device i2c 5d on end end chip drivers/i2c/hid register "generic.hid" = ""GTCH7502"" register "generic.desc" = ""G2TOUCH Touchscreen"" register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)" register "generic.probed" = "1" register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D5)" register "generic.reset_delay_ms" = "100" register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A11)" register "generic.stop_delay_ms" = "30" register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" register "generic.enable_delay_ms" = "30" register "generic.has_power_resource" = "1" register "generic.disable_gpio_export_in_crs" = "1" register "hid_desc_reg_offset" = "0x01" device i2c 40 on end end end # I2C 2 device pci 15.3 off end # I2C 3 device pci 1c.7 on end device pci 19.0 on chip drivers/i2c/da7219 register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)" register "btn_cfg" = "50" register "mic_det_thr" = "500" register "jack_ins_deb" = "20" register "jack_det_rate" = ""32ms_64ms"" register "jack_rem_deb" = "1" register "a_d_btn_thr" = "0xa" register "d_b_btn_thr" = "0x16" register "b_c_btn_thr" = "0x21" register "c_mic_btn_thr" = "0x3e" register "btn_avg" = "4" register "adc_1bit_rpt" = "1" register "micbias_lvl" = "2600" register "mic_amp_in_sel" = ""diff"" device i2c 1a on probe AUDIO_CODEC_SOURCE AUDIO_CODEC_UNPROVISIONED probe AUDIO_CODEC_SOURCE AUDIO_CODEC_DA7219 end end chip drivers/i2c/cs42l42 register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H16)" register "ts_inv" = "true" register "ts_dbnc_rise" = "RISE_DEB_1000_MS" register "ts_dbnc_fall" = "FALL_DEB_0_MS" register "btn_det_init_dbnce" = "100" register "btn_det_event_dbnce" = "10" register "bias_lvls[0]" = "15" register "bias_lvls[1]" = "8" register "bias_lvls[2]" = "4" register "bias_lvls[3]" = "1" register "hs_bias_ramp_rate" = "HSBIAS_RAMP_SLOW" register "hs_bias_sense_disable" = "true" device i2c 48 on probe AUDIO_CODEC_SOURCE AUDIO_CODEC_CS42l42 end end end #I2C 4 device pci 1f.3 on chip drivers/generic/max98357a register "hid" = ""MX98360A"" register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D17)" device generic 0 on end end end # Intel HDA end end