fw_config field AUDIO_CODEC_SOURCE 41 43 option AUDIO_CODEC_UNPROVISIONED 0 option AUDIO_CODEC_ALC5682 1 option AUDIO_CODEC_ALC5682I_VS 2 end end chip soc/intel/jasperlake # USB Port Configuration register "usb2_ports[2]" = "USB2_PORT_MID(OC0)" # USB3 Type A port register "usb2_ports[4]" = "USB2_PORT_EMPTY" # Disable unused USB2P_5 and USB2N_5 register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # Camera register "usb2_ports[6]" = "USB2_PORT_EMPTY" # Disable unused USB2P_7 and USB2N_7 # Intel Common SoC Config #+-------------------+---------------------------+ #| Field | Value | #+-------------------+---------------------------+ #| GSPI0 | cr50 TPM. Early init is | #| | required to set up a BAR | #| | for TPM communication | #| | before memory is up | #| I2C0 | Trackpad | #| I2C1 | | #| I2C2 | Touchscreen | #| I2C3 | | #| I2C4 | Audio | #| I2C5 | P-sensor | #+-------------------+---------------------------+ register "common_soc_config" = "{ .gspi[0] = { .speed_mhz = 1, .early_init = 1, }, .i2c[0] = { .speed = I2C_SPEED_FAST, }, .i2c[1] = { .speed = I2C_SPEED_FAST, }, .i2c[2] = { .speed = I2C_SPEED_FAST, }, .i2c[3] = { .speed = I2C_SPEED_FAST, }, .i2c[4] = { .speed = I2C_SPEED_FAST, }, .i2c[5] = { .speed = I2C_SPEED_FAST, }, }" register "SerialIoI2cMode" = "{ [PchSerialIoIndexI2C0] = PchSerialIoPci, [PchSerialIoIndexI2C1] = PchSerialIoDisabled, [PchSerialIoIndexI2C2] = PchSerialIoPci, [PchSerialIoIndexI2C3] = PchSerialIoDisabled, [PchSerialIoIndexI2C4] = PchSerialIoPci, [PchSerialIoIndexI2C5] = PchSerialIoPci, }" device domain 0 on device pci 04.0 on # Default DPTF Policy for all Dedede boards if not overridden chip drivers/intel/dptf register "options.tsr[0].desc" = ""Memory"" register "options.tsr[1].desc" = ""CPU"" register "policies.passive" = "{ [0] = DPTF_PASSIVE(CPU, CPU, 85, 4000), [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 75, 4000), [2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 75, 4000), }" register "policies.critical" = "{ [0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN), [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 95, SHUTDOWN), [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 95, SHUTDOWN), }" register "controls.power_limits" = "{ .pl1 = { .min_power = 4000, .max_power = 6000, .time_window_min = 1 * MSECS_PER_SEC, .time_window_max = 1 * MSECS_PER_SEC, .granularity = 250, }, .pl2 = { .min_power = 20000, .max_power = 20000, .time_window_min = 1 * MSECS_PER_SEC, .time_window_max = 1 * MSECS_PER_SEC, .granularity = 1000, } }" register "controls.charger_perf" = "{ [0] = { 55, 3500 }, [1] = { 47, 3000 }, [2] = { 39, 2500 }, [3] = { 31, 2000 }, }" device generic 0 on end end end device pci 05.0 off end # IPU - MIPI Camera device pci 14.0 on chip drivers/usb/acpi device usb 0.0 on chip drivers/usb/acpi register "desc" = ""Right Type-C Port"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "group" = "ACPI_PLD_GROUP(2, 1)" device usb 2.1 on probe DB_PORTS DB_PORTS_1C_LTE probe DB_PORTS DB_PORTS_1C end end chip drivers/usb/acpi register "desc" = ""Right Type-C Port"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "group" = "ACPI_PLD_GROUP(2, 1)" device usb 3.1 on probe DB_PORTS DB_PORTS_1C_LTE probe DB_PORTS DB_PORTS_1C end end chip drivers/usb/acpi register "desc" = ""UFCamera"" register "type" = "UPC_TYPE_INTERNAL" device usb 2.5 on end end chip drivers/usb/acpi register "desc" = ""LTE"" register "type" = "UPC_TYPE_INTERNAL" register "has_power_resource" = "1" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H17)" register "reset_off_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)" register "enable_delay_ms" = "20" device usb 3.3 on probe DB_PORTS DB_PORTS_1C_LTE probe DB_PORTS DB_PORTS_LTE end end end end end # USB xHCI device pci 15.0 on chip drivers/i2c/hid register "generic.hid" = ""PIXA2635"" register "generic.desc" = ""PIXA Touchpad"" register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_B3_IRQ)" register "generic.wake" = "GPE0_DW0_03" register "generic.detect" = "1" register "hid_desc_reg_offset" = "0x01" device i2c 15 on end end end # I2C 0 device pci 19.0 on chip drivers/i2c/generic register "hid" = ""10EC5682"" register "name" = ""RT58"" register "desc" = ""Realtek RT5682"" register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)" register "property_count" = "1" register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" register "property_list[0].name" = ""realtek,jd-src"" register "property_list[0].integer" = "1" device i2c 1a on probe AUDIO_CODEC_SOURCE AUDIO_CODEC_ALC5682 probe AUDIO_CODEC_SOURCE AUDIO_CODEC_UNPROVISIONED end end chip drivers/i2c/generic register "hid" = ""RTL5682"" register "name" = ""RT58"" register "desc" = ""Realtek RT5682"" register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)" register "property_count" = "1" register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" register "property_list[0].name" = ""realtek,jd-src"" register "property_list[0].integer" = "1" device i2c 1a on probe AUDIO_CODEC_SOURCE AUDIO_CODEC_ALC5682I_VS end end end # I2C 4 device pci 19.1 on chip drivers/i2c/sx9324 register "desc" = ""SAR Proximity Sensor"" register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E11_IRQ)" register "uid" = "0" register "reg_gnrl_ctrl0" = "0x0a" register "reg_gnrl_ctrl1" = "0x22" register "reg_afe_ctrl0" = "0x20" register "reg_afe_ctrl3" = "0x01" register "reg_afe_ctrl4" = "0x47" register "reg_afe_ctrl6" = "0x00" register "reg_afe_ctrl7" = "0x47" register "reg_afe_ctrl8" = "0x12" register "reg_afe_ctrl9" = "0x0f" register "reg_afe_ph0" = "0x37" register "reg_afe_ph1" = "0x29" register "reg_afe_ph2" = "0x1f" register "reg_afe_ph3" = "0x3d" register "reg_prox_ctrl0" = "0x0b" register "reg_prox_ctrl1" = "0x0b" register "reg_prox_ctrl2" = "0x20" register "reg_prox_ctrl3" = "0x20" register "reg_prox_ctrl4" = "0x0c" register "reg_prox_ctrl5" = "0x00" register "reg_prox_ctrl6" = "0x2d" register "reg_prox_ctrl7" = "0xc0" register "reg_adv_ctrl0" = "0x00" register "reg_adv_ctrl1" = "0x00" register "reg_adv_ctrl2" = "0x00" register "reg_adv_ctrl3" = "0x00" register "reg_adv_ctrl4" = "0x00" register "reg_adv_ctrl5" = "0x05" register "reg_adv_ctrl6" = "0x00" register "reg_adv_ctrl7" = "0x00" register "reg_adv_ctrl8" = "0x00" register "reg_adv_ctrl9" = "0x00" register "reg_adv_ctrl10" = "0x00" register "reg_adv_ctrl11" = "0x00" register "reg_adv_ctrl12" = "0x00" register "reg_adv_ctrl13" = "0x00" register "reg_adv_ctrl14" = "0x80" register "reg_adv_ctrl15" = "0x0c" register "reg_adv_ctrl16" = "0x04" register "reg_adv_ctrl17" = "0x70" register "reg_adv_ctrl18" = "0x40" register "reg_adv_ctrl19" = "0x00" register "reg_adv_ctrl20" = "0x00" register "reg_irq_msk" = "0x6f" register "reg_irq_cfg0" = "0x00" register "reg_irq_cfg1" = "0x80" register "reg_irq_cfg2" = "0x00" device i2c 28 on probe DB_PORTS DB_PORTS_1C_LTE probe DB_PORTS DB_PORTS_LTE end end end # I2C 5 device pci 1f.3 on chip drivers/generic/max98357a register "hid" = ""MX98360A"" register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D17)" device generic 0 on end end end # Intel HDA end end