chip soc/intel/braswell

	# IGD Displays
	register "gfx" = "GMA_STATIC_DISPLAYS(0)"

	############################################################
	# Set the parameters for MemoryInit
	############################################################

	register "PcdMrcInitSpdAddr1" = "0xa0"
	register "PcdMrcInitSpdAddr2" = "0xa2"
	register "PcdIgdDvmt50PreAlloc" = "1"
	register "PcdDvfsEnable" = "1"
	register "PcdCaMirrorEn" = "1"

	############################################################
	# Set the parameters for SiliconInit
	############################################################

	register "PcdSdcardMode" = "PCH_PCI_MODE"
	register "PcdEnableHsuart0" = "0"
	register "PcdEnableHsuart1" = "1"
	register "PcdEnableAzalia" = "1"
	register "PcdEnableXhci" = "1"
	register "PcdEnableLpe" = "1"
	register "PcdEnableDma0" = "1"
	register "PcdEnableDma1" = "1"
	register "PcdEnableI2C0" = "0"		# Touchscreen
	register "PcdEnableI2C1" = "1"		# PMIC (or Maxim Audio)
	register "PcdEnableI2C2" = "0"
	register "PcdEnableI2C3" = "0"
	register "PcdEnableI2C4" = "1"		# Realtek Audio
	register "PcdEnableI2C5" = "1"		# Touchpad
	register "PcdEnableI2C6" = "0"
	register "PunitPwrConfigDisable" = "0"	# Enable SVID
	register "ChvSvidConfig" = "SVID_PMIC_CONFIG"
	register "PcdEmmcMode" = "PCH_PCI_MODE"
	register "PcdEnableSata" = "0"		# Disable SATA
	register "Usb2Port0PerPortPeTxiSet" = "7"
	register "Usb2Port0PerPortTxiSet" = "5"
	register "Usb2Port0IUsbTxEmphasisEn" = "2"
	register "Usb2Port0PerPortTxPeHalf" = "1"
	register "Usb2Port1PerPortPeTxiSet" = "7"
	register "Usb2Port1PerPortTxiSet" = "3"
	register "Usb2Port1IUsbTxEmphasisEn" = "2"
	register "Usb2Port1PerPortTxPeHalf" = "1"
	register "Usb2Port2PerPortPeTxiSet" = "7"
	register "Usb2Port2PerPortTxiSet" = "3"
	register "Usb2Port2IUsbTxEmphasisEn" = "2"
	register "Usb2Port2PerPortTxPeHalf" = "1"
	register "Usb2Port3PerPortPeTxiSet" = "7"
	register "Usb2Port3PerPortTxiSet" = "3"
	register "Usb2Port3IUsbTxEmphasisEn" = "2"
	register "Usb2Port3PerPortTxPeHalf" = "1"
	register "Usb2Port4PerPortPeTxiSet" = "7"
	register "Usb2Port4PerPortTxiSet" = "3"
	register "Usb2Port4IUsbTxEmphasisEn" = "2"
	register "Usb2Port4PerPortTxPeHalf" = "1"
	register "Usb3Lane0Ow2tapgen2deemph3p5" = "0x3a"
	register "Usb3Lane1Ow2tapgen2deemph3p5" = "0x64"
	register "Usb3Lane2Ow2tapgen2deemph3p5" = "0x64"
	register "Usb3Lane3Ow2tapgen2deemph3p5" = "0x3a"
	register "PcdPchSsicEnable" = "1"
	register "PMIC_I2CBus" = "1"
	register "ISPEnable" = "0"		# Disable IUNIT
	register "ISPPciDevConfig" = "3"
	register "PcdSdDetectChk" = "0"		# Disable SD card detect

	register "I2C0Frequency" = "1"
	register "I2C1Frequency" = "2"		# Set the PMIC clock speed to 1Mhz
	register "I2C2Frequency" = "1"
	register "I2C3Frequency" = "1"
	register "I2C4Frequency" = "1"
	register "I2C5Frequency" = "1"
	register "I2C6Frequency" = "1"

	# LPE audio codec settings
	register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock

	# Enable LPSS and LPE devices in ACPI mode
	register "lpss_acpi_mode" = "1"
	register "emmc_acpi_mode" = "0"
	register "sd_acpi_mode" = "0"
	register "lpe_acpi_mode" = "1"

	# Disable SLP_X stretching after SUS power well fail.
	register "disable_slp_x_stretch_sus_fail" = "1"

	# Allow PCIe devices to wake system from suspend
	register "pcie_wake_enable" = "1"

	device cpu_cluster 0 on end
	device domain 0 on
					# EDS Table 24-4, Figure 24-5
		device pci 00.0 on  end	# 8086 2280 - SoC transaction router
		device pci 02.0 on  end	# 8086 22b0/22b1 - B1/C0 stepping Graphics and Display
		device pci 03.0 off end	# 8086 22b8 - Camera and Image Processor
		device pci 0b.0 on  end	# 8086 22dc - PUNIT/DPTF
		device pci 10.0 on  end	# 8086 2294 - MMC Port
		device pci 11.0 off end	# 8086 0F15 - SDIO Port
		device pci 12.0 on  end	# 8086 0F16 - SD Port
		device pci 13.0 off end	# 8086 22a3 - Sata controller
		device pci 14.0 on  end	# 8086 22b5 - USB XHCI
		device pci 15.0 on  end	# 8086 22a8 - LP Engine Audio
		device pci 16.0 off end	# 8086 22b7 - USB device
		device pci 18.0 on  end	# 8086 22c0 - SIO - DMA
		device pci 18.1 off end	# 8086 22c1 -   I2C Port 1: Touchscreen
		device pci 18.2 on  end	# 8086 22c2 -   I2C Port 2: PMIC
		device pci 18.3 off end	# 8086 22c3 -   I2C Port 3
		device pci 18.4 off end	# 8086 22c4 -   I2C Port 4
		device pci 18.5 on  end	# 8086 22c5 -   I2C Port 5: Realtek Audio
		device pci 18.6 on  end	# 8086 22c6 -   I2C Port 6: Touchpad
		device pci 18.7 off end	# 8086 22c7 -   I2C Port 7
		device pci 1a.0 off end	# 8086 0F18 - Trusted Execution Engine
		device pci 1b.0 on  end	# 8086 2284 - HD Audio
		device pci 1c.0 on  end	# 8086 22c8 - PCIe Root Port 1
		device pci 1c.1 off end	# 8086 22ca - PCIe Root Port 2
		device pci 1c.2 on  end	# 8086 22cc - PCIe Root Port 3: WiFi
		device pci 1c.3 off end	# 8086 22ce - PCIe Root Port 4
		device pci 1e.0 on  end	# 8086 2286 - SIO - DMA
		device pci 1e.1 off end	# 8086 0F08 -   PWM 1
		device pci 1e.2 off end	# 8086 0F09 -   PWM 2
		device pci 1e.3 off end	# 8086 228a -   HSUART 1
		device pci 1e.4 off end	# 8086 228c -   HSUART 2
		device pci 1e.5 on  end	# 8086 228e -   SPI 1
		device pci 1e.6 off end	# 8086 2290 -   SPI 2
		device pci 1e.7 off end	# 8086 22ac -   SPI 3
		device pci 1f.0 on	# 8086 229c - LPC bridge
			chip drivers/pc80/tpm
				device pnp 0c31.0 on end
			end
			chip ec/google/chromeec
				device pnp 0c09.0 on end
			end
		end # LPC Bridge
		device pci 1f.3 off end	# 8086 0F12 - SMBus 0
	end
end