chip soc/intel/alderlake
# Intel Common SoC Config
#+-------------------+---------------------------+
#| Field | Value |
#+-------------------+---------------------------+
#| I2C0 | Audio |
#| I2C1 | GPU |
#| I2C2 | External graphic |
#| I2C3 | cr50 TPM. Early init is |
#| | required to set up a BAR |
#| | for TPM communication |
#| I2C5 | Trackpad |
#+-------------------+---------------------------+
register "common_soc_config" = "{
.i2c[0] = {
.speed = I2C_SPEED_FAST,
.rise_time_ns = 650,
.fall_time_ns = 400,
.data_hold_time_ns = 50,
},
.i2c[1] = {
.speed = I2C_SPEED_FAST,
.rise_time_ns = 650,
.fall_time_ns = 300,
.data_hold_time_ns = 50,
},
.i2c[2] = {
.speed = I2C_SPEED_FAST,
.rise_time_ns = 650,
.fall_time_ns = 300,
.data_hold_time_ns = 50,
},
.i2c[3] = {
.early_init = 1,
.speed = I2C_SPEED_FAST,
.rise_time_ns = 600,
.fall_time_ns = 400,
.data_hold_time_ns = 50,
},
.i2c[5] = {
.speed = I2C_SPEED_FAST,
.rise_time_ns = 650,
.fall_time_ns = 400,
.data_hold_time_ns = 50,
},
}"
register "tcc_offset" = "3" # TCC of 97
register "sagv" = "SaGv_Disabled"
register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC1)" # USB2_C0
register "usb2_ports[2]" = "USB2_PORT_TYPE_C(OC2)" # USB2_C1
register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # UCAM
register "usb2_ports[7]" = "USB2_PORT_MID(OC0)" # Type-A Port A1
register "usb2_ports[8]" = "USB2_PORT_MID(OC3)" # Type-A Port A0
register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # M.2 Bluetooth
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # USB3/2 Type A port A1
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # USB3/2 Type A port A0
register "tcss_ports[0]" = "TCSS_PORT_DEFAULT(OC2)" # Typc-C Port C1
register "tcss_ports[2]" = "TCSS_PORT_DEFAULT(OC1)" # Typc-C Port C0
register "serial_io_i2c_mode" = "{
[PchSerialIoIndexI2C0] = PchSerialIoPci,
[PchSerialIoIndexI2C1] = PchSerialIoPci,
[PchSerialIoIndexI2C2] = PchSerialIoPci,
[PchSerialIoIndexI2C3] = PchSerialIoPci,
[PchSerialIoIndexI2C4] = PchSerialIoDisabled,
[PchSerialIoIndexI2C5] = PchSerialIoPci,
}"
device domain 0 on
device ref pcie4_0 on
# Enable CPU PCIe RP 1 using CLKREQ 0 and CLKSRC 0
register "cpu_pcie_rp[CPU_RP(1)]" = "{
.clk_req = 0,
.clk_src = 0,
.flags = PCIE_RP_LTR | PCIE_RP_AER,
}"
device pci 00.0 alias dgpu on end
end
device ref dtt on
chip drivers/intel/dptf
## sensor information
register "options.tsr[0].desc" = ""DRAM""
register "options.tsr[1].desc" = ""GPU""
register "options.tsr[2].desc" = ""Charger""
# TODO: below values are initial reference values only
## Active Policy
register "policies.active" = "{
[0] = {
.target = DPTF_CPU,
.thresholds = {
TEMP_PCT(85, 90),
TEMP_PCT(80, 80),
TEMP_PCT(75, 70),
TEMP_PCT(70, 50),
TEMP_PCT(65, 30),
}
},
[1] = {
.target = DPTF_TEMP_SENSOR_1,
.thresholds = {
TEMP_PCT(50, 90),
TEMP_PCT(48, 70),
TEMP_PCT(46, 60),
TEMP_PCT(43, 40),
TEMP_PCT(40, 30),
}
}
}"
## Passive Policy
register "policies.passive" = "{
[0] = DPTF_PASSIVE(CPU, CPU, 95, 5000),
[1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 75, 5000),
[2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 75, 5000),
[3] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_2, 75, 5000),
}"
## Critical Policy
register "policies.critical" = "{
[0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN),
[1] = DPTF_CRITICAL(TEMP_SENSOR_0, 105, SHUTDOWN),
[2] = DPTF_CRITICAL(TEMP_SENSOR_1, 105, SHUTDOWN),
[3] = DPTF_CRITICAL(TEMP_SENSOR_2, 105, SHUTDOWN),
}"
register "controls.power_limits" = "{
.pl1 = {
.min_power = 3000,
.max_power = 15000,
.time_window_min = 28 * MSECS_PER_SEC,
.time_window_max = 32 * MSECS_PER_SEC,
.granularity = 200,
},
.pl2 = {
.min_power = 55000,
.max_power = 55000,
.time_window_min = 28 * MSECS_PER_SEC,
.time_window_max = 32 * MSECS_PER_SEC,
.granularity = 1000,
}
}"
register "oem_data.oem_variables" = "{
[0] = 0x0
}"
## Charger Performance Control (Control, mA)
register "controls.charger_perf" = "{
[0] = { 255, 1700 },
[1] = { 24, 1500 },
[2] = { 16, 1000 },
[3] = { 8, 500 }
}"
## Fan Performance Control (Percent, Speed, Noise, Power)
register "controls.fan_perf" = "{
[0] = { 90, 4700, 220, 2200, },
[1] = { 80, 4500, 180, 1800, },
[2] = { 70, 4300, 145, 1450, },
[3] = { 60, 3700, 115, 1150, },
[4] = { 50, 3300, 90, 900, },
[5] = { 40, 3100, 55, 550, },
[6] = { 30, 2800, 30, 300, },
[7] = { 20, 2500, 15, 150, },
[8] = { 10, 2300, 10, 100, },
[9] = { 0, 0, 0, 50, }
}"
## Fan options
register "options.fan.fine_grained_control" = "1"
register "options.fan.step_size" = "2"
device generic 0 alias dptf_policy on end
end
end
device ref cnvi_wifi on
chip drivers/wifi/generic
register "wake" = "GPE0_PME_B0"
device generic 0 on end
end
end
device ref i2c0 on
chip drivers/i2c/generic
register "hid" = ""RTL5682""
register "name" = ""RT58""
register "desc" = ""Headset Codec""
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)"
# Set the jd_src to RT5668_JD1 for jack detection
register "property_count" = "1"
register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
register "property_list[0].name" = ""realtek,jd-src""
register "property_list[0].integer" = "1"
device i2c 1a on end
end
end #I2C0
device ref i2c1 on end # GPU
device ref i2c2 on end # External GPU
device ref i2c3 on
chip drivers/i2c/tpm
register "hid" = ""GOOG0005""
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_A20_IRQ)"
device i2c 50 on end
end
end
device ref i2c5 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
register "wake" = "GPE0_DW2_14"
register "detect" = "1"
device i2c 15 on end
end
end
device ref pcie_rp3 on
chip soc/intel/common/block/pcie/rtd3
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H13)"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D18)"
register "srcclk_pin" = "3"
device generic 0 on end
end
# Enable SD Card PCIE 3 using clk 4
register "pch_pcie_rp[PCH_RP(3)]" = "{
.clk_src = 4,
.clk_req = 4,
.flags = PCIE_RP_HOTPLUG | PCIE_RP_LTR | PCIE_RP_AER,
}"
end #PCIE3 SD card
device ref pcie_rp4 off end
device ref pcie_rp6 off end
device ref pcie_rp7 off end
device ref pcie_rp8 on
# Enable PCIE 8 using clk 3
register "pch_pcie_rp[PCH_RP(8)]" = "{
.clk_src = 3,
.clk_req = 3,
.flags = PCIE_RP_LTR | PCIE_RP_AER,
}"
chip drivers/net
register "customized_leds" = "0x05af"
register "wake" = "GPE0_DW0_07"
register "device_index" = "0"
register "add_acpi_dma_property" = "true"
device pci 00.0 on end
end
end #RTL8111H Ethernet NIC
device ref pcie_rp9 on
# Enable NVMe PCIE 9 using clk 1
register "pch_pcie_rp[PCH_RP(9)]" = "{
.clk_src = 1,
.clk_req = 1,
.flags = PCIE_RP_LTR | PCIE_RP_AER,
}"
end #PCIE9-12 SSD
device ref hda on
chip drivers/generic/max98357a
register "hid" = ""MX98360A""
register "sdmode_gpio" =
"ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)"
register "sdmode_delay" = "5"
device generic 0 on end
end
end
device ref pch_espi on
chip ec/google/chromeec
use conn0 as mux_conn[0]
use conn1 as mux_conn[1]
device pnp 0c09.0 on end
end
end
device ref pmc hidden
chip drivers/intel/pmc_mux
device generic 0 on
chip drivers/intel/pmc_mux/conn
use usb2_port1 as usb2_port
use tcss_usb3_port3 as usb3_port
device generic 0 alias conn0 on end
end
chip drivers/intel/pmc_mux/conn
use usb2_port3 as usb2_port
use tcss_usb3_port1 as usb3_port
device generic 1 alias conn1 on end
end
end
end
end
device ref tcss_xhci on
chip drivers/usb/acpi
device ref tcss_root_hub on
chip drivers/usb/acpi
register "desc" = ""USB3 Type-C Port C1 (MLB)""
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
register "use_custom_pld" = "true"
register "custom_pld" = "ACPI_PLD_TYPE_C(BACK, LEFT, ACPI_PLD_GROUP(2, 1))"
device ref tcss_usb3_port1 on end
end
chip drivers/usb/acpi
register "desc" = ""USB3 Type-C Port C0 (MLB)""
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
register "use_custom_pld" = "true"
register "custom_pld" = "ACPI_PLD_TYPE_C(BACK, RIGHT, ACPI_PLD_GROUP(1, 1))"
device ref tcss_usb3_port3 on end
end
end
end
end
device ref xhci on
chip drivers/usb/acpi
device ref xhci_root_hub on
chip drivers/usb/acpi
register "desc" = ""USB2 Type-C Port C0 (MLB)""
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
register "use_custom_pld" = "true"
register "custom_pld" = "ACPI_PLD_TYPE_C(BACK, RIGHT, ACPI_PLD_GROUP(1, 1))"
device ref usb2_port1 on end
end
chip drivers/usb/acpi
register "desc" = ""USB2 Type-C Port C1 (MLB)""
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
register "use_custom_pld" = "true"
register "custom_pld" = "ACPI_PLD_TYPE_C(BACK, LEFT, ACPI_PLD_GROUP(2, 1))"
device ref usb2_port3 on end
end
chip drivers/usb/acpi
register "desc" = ""USB2 Camera""
register "type" = "UPC_TYPE_INTERNAL"
device ref usb2_port6 on end
end
chip drivers/usb/acpi
register "desc" = ""USB2 Type-A Port 1""
register "type" = "UPC_TYPE_A"
register "use_custom_pld" = "true"
register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, LEFT, ACPI_PLD_GROUP(3, 2))"
device ref usb2_port8 on end
end
chip drivers/usb/acpi
register "desc" = ""USB2 Type-A Port 0""
register "type" = "UPC_TYPE_A"
register "use_custom_pld" = "true"
register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(3, 1))"
device ref usb2_port9 on end
end
chip drivers/usb/acpi
register "desc" = ""USB2 Bluetooth""
register "type" = "UPC_TYPE_INTERNAL"
register "reset_gpio" =
"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
device ref usb2_port10 on end
end
chip drivers/usb/acpi
register "desc" = ""USB3 Type-A Port 1""
register "type" = "UPC_TYPE_USB3_A"
register "use_custom_pld" = "true"
register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(3, 1))"
device ref usb3_port1 on end
end
chip drivers/usb/acpi
register "desc" = ""USB3 Type-A Port 0""
register "type" = "UPC_TYPE_USB3_A"
register "use_custom_pld" = "true"
register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, LEFT, ACPI_PLD_GROUP(3, 2))"
device ref usb3_port2 on end
end
end
end
end
end
end