## SPDX-License-Identifier: GPL-2.0-only

config ACPI_FNKEY_GEN_SCANCODE
	default 94 if (BOARD_GOOGLE_LOTSO || BOARD_GOOGLE_JUBILANT)

config BOARD_GOOGLE_BROX_COMMON
	def_bool n
	select DRIVERS_GENERIC_GPIO_KEYS
	select DRIVERS_I2C_GENERIC
	select DRIVERS_I2C_HID
	select DRIVERS_INTEL_DPTF
	select DRIVERS_INTEL_DPTF_SUPPORTS_TPCH
	select DRIVERS_INTEL_PMC
	select DRIVERS_INTEL_SOUNDWIRE
	select DRIVERS_INTEL_USB4_RETIMER
	select DRIVERS_SPI_ACPI
	select DRIVERS_WIFI_GENERIC
	select EC_GOOGLE_CHROMEEC
	select EC_GOOGLE_CHROMEEC_BOARDID
	select EC_GOOGLE_CHROMEEC_ESPI
	select EC_GOOGLE_CHROMEEC_SKUID
	select ENABLE_TCSS_USB_DETECTION if !(SOC_INTEL_TCSS_USE_PDC_PMC_USBC_MUX_CONFIGURATION || CHROMEOS)
	select FW_CONFIG
	select FW_CONFIG_SOURCE_CHROMEEC_CBI
	select GOOGLE_SMBIOS_MAINBOARD_VERSION
	select HAVE_ACPI_RESUME
	select HAVE_ACPI_TABLES
	select HAVE_FSP_LOGO_SUPPORT if RUN_FSP_GOP
	select I2C_TPM
	select INTEL_LPSS_UART_FOR_CONSOLE
	select MAINBOARD_HAS_CHROMEOS
	select MAINBOARD_HAS_TPM2
	select PMC_IPC_ACPI_INTERFACE
	select SOC_INTEL_CSE_LITE_SKU
	select SOC_INTEL_CSE_SEND_EOP_ASYNC
	select SOC_INTEL_COMMON_BLOCK_USB4
	select SOC_INTEL_COMMON_BLOCK_TCSS
	select SOC_INTEL_ENABLE_USB4_PCIE_RESOURCES
	select SOC_INTEL_COMMON_BASECODE_DEBUG_FEATURE
	select SOC_INTEL_CRASHLOG
	select SOC_INTEL_CSE_PRE_CPU_RESET_TELEMETRY_V1

config BOARD_GOOGLE_BASEBOARD_BROX
	def_bool n
	select BOARD_GOOGLE_BROX_COMMON
	select BOARD_ROMSIZE_KB_32768
	select DRIVERS_AUDIO_SOF
	select DRIVERS_GFX_GENERIC
	select HAVE_SLP_S0_GATE
	select MEMORY_SOLDERDOWN if !BOARD_GOOGLE_GREENBAYUPOC
	select SOC_INTEL_COMMON_BLOCK_IPU
	select SOC_INTEL_RAPTORLAKE
	select SOC_INTEL_ALDERLAKE_PCH_P
	select SOC_INTEL_COMMON_BLOCK_HDA_VERB
	select SOC_INTEL_TCSS_USE_PDC_PMC_USBC_MUX_CONFIGURATION
	select DRIVERS_INTEL_ISH
	select MAINBOARD_HAS_EARLY_LIBGFXINIT
	select SYSTEM_TYPE_LAPTOP
	select TPM_GOOGLE_TI50

config BOARD_GOOGLE_BROX
	select BOARD_GOOGLE_BASEBOARD_BROX
	select CHROMEOS_WIFI_SAR if CHROMEOS
	select USE_UNIFIED_AP_FIRMWARE_FOR_UFS_AND_NON_UFS

config BOARD_GOOGLE_BROX_TI_PDC
	select BOARD_GOOGLE_BASEBOARD_BROX
	select CHROMEOS_WIFI_SAR if CHROMEOS
	select USE_UNIFIED_AP_FIRMWARE_FOR_UFS_AND_NON_UFS

config BOARD_GOOGLE_BROX_EC_ISH
	select BOARD_GOOGLE_BASEBOARD_BROX
	select CHROMEOS_WIFI_SAR if CHROMEOS
	select SOC_INTEL_STORE_ISH_FW_VERSION

config BOARD_GOOGLE_LOTSO
	select BOARD_GOOGLE_BASEBOARD_BROX
	select CHROMEOS_WIFI_SAR if CHROMEOS
	select USE_UNIFIED_AP_FIRMWARE_FOR_UFS_AND_NON_UFS

config BOARD_GOOGLE_GREENBAYUPOC
	select BOARD_GOOGLE_BASEBOARD_BROX
	select CHROMEOS_WIFI_SAR if CHROMEOS
	select MEMORY_SODIMM

config BOARD_GOOGLE_JUBILANT
	select BOARD_GOOGLE_BASEBOARD_BROX
	select CHROMEOS_WIFI_SAR if CHROMEOS
	select DRIVERS_GENERIC_ALC1015
	select DRIVERS_I2C_SX9324
	select USE_UNIFIED_AP_FIRMWARE_FOR_UFS_AND_NON_UFS

if BOARD_GOOGLE_BROX_COMMON

config BASEBOARD_DIR
	string
	default "brox" if BOARD_GOOGLE_BASEBOARD_BROX

config CHROMEOS
	select EC_GOOGLE_CHROMEEC_SWITCHES
	select GBB_FLAG_DISABLE_PD_SOFTWARE_SYNC
	select HAS_RECOVERY_MRC_CACHE

config CHROMEOS_WIFI_SAR
	bool "Enable SAR options for ChromeOS build"
	depends on CHROMEOS
	select DSAR_ENABLE
	select GEO_SAR_ENABLE
	select SAR_ENABLE
	select USE_SAR

config DEVICETREE
	default "variants/baseboard/\$(CONFIG_BASEBOARD_DIR)/devicetree.cb"

config DRIVER_TPM_I2C_BUS
	hex
	default 0x4 if BOARD_GOOGLE_BASEBOARD_BROX

config PL4_LIMIT_FOR_CRITICAL_BAT_BOOT
	int
	default 9
	help
	  Select this if the variant has to boot even with low battery, critical battery
	  threshold, or when the battery is physically disconnected. PL4, which stands for
	  Processor Instantaneous Power or Absolute Peak Power, controls the highest power draw
	  from the processor at any given moment within the Pl1Tau duration. Therefore, PL4
	  acts as a failsafe mechanism to set an upper threshold limit for the processor's
	  instantaneous power draw. For a 30W adapter, the maximum peak power is set at 9
	  watts, which is 30W multiplied by 32% efficiency. This default pl4 value is set for
	  30W or any higher adapter rating, such as 45W or 65W.

config DRIVER_TPM_I2C_ADDR
	hex
	default 0x50

config FMDFILE
	default "src/mainboard/\$(CONFIG_MAINBOARD_DIR)/chromeos.fmd" if CHROMEOS

config TPM_TIS_ACPI_INTERRUPT
	int
	default 66 # GPE0_DW2_02 (GPP_E2)

config OVERRIDE_DEVICETREE
	default "variants/\$(CONFIG_VARIANT_DIR)/overridetree.cb"

config MAINBOARD_DIR
	default "google/brox"

config MAINBOARD_FAMILY
	string
	default "Google_Brox" if BOARD_GOOGLE_BASEBOARD_BROX

config MAINBOARD_PART_NUMBER
	default "Brox" if BOARD_GOOGLE_BROX
	default "Brox_Ec_Ish" if BOARD_GOOGLE_BROX_EC_ISH
	default "Brox_Ti_Pdc" if BOARD_GOOGLE_BROX_TI_PDC
	default "Greenbayupoc" if BOARD_GOOGLE_GREENBAYUPOC
	default "Jubilant" if BOARD_GOOGLE_JUBILANT
	default "Lotso" if BOARD_GOOGLE_LOTSO

config VARIANT_DIR
	default "brox" if BOARD_GOOGLE_BROX || BOARD_GOOGLE_BROX_EC_ISH || BOARD_GOOGLE_BROX_TI_PDC
	default "lotso" if BOARD_GOOGLE_LOTSO
	default "greenbayupoc" if BOARD_GOOGLE_GREENBAYUPOC
	default "jubilant" if BOARD_GOOGLE_JUBILANT

config VBOOT
	select VBOOT_LID_SWITCH

config UART_FOR_CONSOLE
	int
	default 0

config HAVE_WWAN_POWER_SEQUENCE
	def_bool n
	help
	  Select this if the variant has a WWAN module and requires the poweroff sequence
	  to be performed on shutdown. Must define WWAN_FCPO, WWAN_RST and WWAN_PERST GPIOs
	  in variant.h, as well as T1_OFF_MS (time between PERST & RST) and T2_OFF_MS (time
	  between RST and FCPO). WWAN_PERST and T1_OFF_MS are only necessary for PCIe WWAN
	  (when HAVE_PCIE_WWAN is also selected).

config HAVE_PCIE_WWAN
	def_bool n

config USE_PM_ACPI_TIMER
	default n

config MEMORY_SODIMM
	def_bool n
	select SPD_CACHE_ENABLE
	select SPD_CACHE_IN_FMAP

config MEMORY_SOLDERDOWN
	def_bool n
	select CHROMEOS_DRAM_PART_NUMBER_IN_CBI if CHROMEOS
	select HAVE_SPD_IN_CBFS

config HAVE_SLP_S0_GATE
	def_bool n

config PCIEXP_DEFAULT_MAX_RESIZABLE_BAR_BITS
	int
	default 33

endif # BOARD_GOOGLE_BROX_COMMON