# SPDX-License-Identifier: GPL-2.0-only chip northbridge/amd/agesa/family14/root_complex device cpu_cluster 0 on chip cpu/amd/agesa/family14 device lapic 0 on end end end device domain 0 on subsystemid 0x1022 0x1510 inherit chip northbridge/amd/agesa/family14 # CPU side of HT root complex chip northbridge/amd/agesa/family14 # PCI side of HT root complex device pci 0.0 on end # Root Complex device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 device pci 4.0 off end # PCIE P2P bridge 0x9604 device pci 5.0 on end # PCIE P2P bridge 0x9605 device pci 6.0 off end # PCIE P2P bridge 0x9606 device pci 7.0 off end # PCIE P2P bridge 0x9607 device pci 8.0 off end # NB/SB Link P2P bridge end # agesa northbridge chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus device pci 11.0 on end # SATA device pci 12.0 on end # USB device pci 12.1 on end # USB device pci 12.2 on end # USB device pci 13.0 on end # USB device pci 13.1 on end # USB device pci 13.2 on end # USB device pci 14.0 on end # SM device pci 14.1 on end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 device pci 14.3 on end # LPC 0x439d device pci 14.4 on end # PCIB 0x4384, NOTE: this device must always be enabled or removed device pci 14.5 off end # USB 2 device pci 15.0 on end # PCIe PortA # PCIe x1 to high speed edge connector device pci 15.1 on end # PCIe PortB # PCIe x1 to high speed edge connector device pci 16.0 off end # OHCI USB3 device pci 16.2 off end # EHCI USB3 register "gpp_configuration" = "4" # GPP_CFGMODE_X1111 register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE end #southbridge/amd/cimx/sb800 device pci 18.0 on end device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end device pci 18.4 on end device pci 18.5 on end device pci 18.6 on end device pci 18.7 on end end #chip northbridge/amd/agesa/family14 # CPU side of HT root complex end #domain end #northbridge/amd/agesa/family14/root_complex