## SPDX-License-Identifier: GPL-2.0-only

chip northbridge/intel/sandybridge
	register "spd_addresses" = "{0x50, 0x51, 0x52, 0x53}"
	device domain 0 on
		chip southbridge/intel/bd82x6x	# Intel Series 7 Panther Point PCH
			register "gen1_dec" = "0x003c0a01"

			# Set max SATA speed to 6.0 Gb/s
			register "sata_port_map" = "0x3f"
			register "sata_interface_speed_support" = "0x3"

			register "usb_port_config" = "{
				{ 1, 5, 0 },
				{ 1, 5, 0 },
				{ 1, 5, 1 },
				{ 1, 5, 1 },
				{ 1, 5, 2 },
				{ 1, 5, 2 },
				{ 1, 5, 3 },
				{ 1, 5, 3 },
				{ 1, 5, 4 },
				{ 1, 5, 4 },
				{ 1, 5, 6 },
				{ 1, 5, 5 },
				{ 1, 5, 5 },
				{ 1, 5, 6 }
			}"

			register "xhci_switchable_ports" = "0xf"
			register "superspeed_capable_ports" = "0xf"

			device ref xhci on	# USB 3.0 Controller
				subsystemid 0x1458 0x5007
			end
			device ref mei1 off	end	# Management Engine Interface 1
			device ref ehci2 on	# USB2 EHCI #2
				subsystemid 0x1458 0x5006
			end
			device ref hda on	# High Definition Audio
				subsystemid 0x1458 0xa002
			end
			device ref pcie_rp1 on  end	# PCIe Port #1: PCIEX4 slot
			device ref pcie_rp2 off end	# PCIe Port #2
			device ref pcie_rp3 off end	# PCIe Port #3
			device ref pcie_rp4 off end	# PCIe Port #4
			device ref pcie_rp5 on		# PCIe Port #5: AR8161 GbE
				device pci 00.0 on end
			end
			device ref pcie_rp6 on	end	# PCIe Port #6: PCIEX1 slot
			device ref pcie_rp7 on	end	# PCIe Port #7: IT8892E PCIe-to-PCI
			device ref pcie_rp8 off end	# PCIe Port #8
			device ref ehci1 on	# USB2 EHCI #1
				subsystemid 0x1458 0x5006
			end
			device ref pci_bridge off end # PCI bridge
			device ref lpc on # ISA/LPC bridge
				subsystemid 0x1458 0x5001
				chip superio/ite/it8728f

					register "TMPIN1.mode"   = "THERMAL_RESISTOR"
					register "TMPIN1.min"    = "-10"
					register "TMPIN1.max"    = "100"
					register "TMPIN2.mode"   = "THERMAL_MODE_DISABLED"
					register "TMPIN3.mode"   = "THERMAL_PECI"
					register "TMPIN3.offset" = "100"
					register "TMPIN3.min"    = "0"
					register "TMPIN3.max"    = "100"

					register "ec.vin_mask"   = "VIN7 | VIN4 | VIN3 | VIN2 | VIN1 | VIN0"

					device pnp 2e.0 off end	# FDC
					device pnp 2e.1 on	# Serial Port 1
						io 0x60 = 0x3f8
						irq 0x70 = 4
					end
					device pnp 2e.2 on
						io 0x60 = 0x2f8
						irq 0x70 = 3
					end
					device pnp 2e.3 on
						io 0x60 = 0x378
						irq 0x70 = 7
						drq 0x74 = 4
					end
					device pnp 2e.4 on	# EC
						io 0x60 = 0xa30
						irq 0x70 = 9
						io 0x62 = 0xa20
					end
					device pnp 2e.5 on	# Keyboard
						io 0x60 = 0x60
						irq 0x70 = 1
						io 0x62 = 0x64
					end
					device pnp 2e.6 on	# Mouse
						irq 0x70 = 12
					end
					device pnp 2e.7 off end	# GPIO
					device pnp 2e.a off end	# IR
				end

				chip drivers/pc80/tpm
					device pnp 0c31.0 off end
				end
			end
			device ref sata1 on	# SATA Controller 1
				subsystemid 0x1458 0xb005
			end
			device ref smbus on	# SMBus
				subsystemid 0x1458 0x5001
			end
			device ref sata2 off end	# SATA Controller 2
		end
	end
end