/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2015 Damien Zammit <damien@zamaudio.com>
 * Copyright (C) 2017 Arthur Heymans <arthur@aheymans.xyz>
 * Copyright (C) 2017 Samuel Holland <samuel@sholland.org>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <console/console.h>
#include <arch/romstage.h>
#include <device/pci_ops.h>
#include <northbridge/intel/x4x/x4x.h>
#include <southbridge/intel/common/pmclib.h>
#include <southbridge/intel/i82801gx/i82801gx.h>
#include <superio/ite/common/ite.h>
#include <superio/ite/it8720f/it8720f.h>

#define LPC_DEV PCI_DEV(0, 0x1f, 0)
#define SERIAL_DEV PNP_DEV(0x2e, IT8720F_SP1)
#define GPIO_DEV PNP_DEV(0x2e, IT8720F_GPIO)

static void mb_lpc_setup(void)
{
	/* Set up GPIOs on Super I/O. */
	ite_reg_write(GPIO_DEV, 0x25, 0x01);
	ite_reg_write(GPIO_DEV, 0x26, 0x04);
	ite_reg_write(GPIO_DEV, 0x27, 0x00);
	ite_reg_write(GPIO_DEV, 0x28, 0x40);
	ite_reg_write(GPIO_DEV, 0x29, 0x01);
	ite_reg_write(GPIO_DEV, 0x73, 0x00);
	ite_reg_write(GPIO_DEV, 0x74, 0x00);
	ite_reg_write(GPIO_DEV, 0xb1, 0x04);
	ite_reg_write(GPIO_DEV, 0xb8, 0x20);
	ite_reg_write(GPIO_DEV, 0xbb, 0x01);
	ite_reg_write(GPIO_DEV, 0xc0, 0x00);
	ite_reg_write(GPIO_DEV, 0xc3, 0x01);
	ite_reg_write(GPIO_DEV, 0xcb, 0x01);
	ite_reg_write(GPIO_DEV, 0xf5, 0x28);
	ite_reg_write(GPIO_DEV, 0xf6, 0x12);
	ite_enable_3vsbsw(GPIO_DEV);

	/* Set up IRQ routing. */
	RCBA16(D31IR) = 0x0132;
	RCBA16(D30IR) = 0x3241;
	RCBA16(D29IR) = 0x0237;

	RCBA32(FD) |= FD_INTLAN;
}

void mainboard_romstage_entry(void)
{
	//                          ch0      ch1
#if CONFIG(BOARD_FOXCONN_G41S_K)
	const u8 spd_addrmap[4] = { 0x50, 0, 0, 0 };
#else
	/* TODO adapt raminit such that other slots can be used
	 * for single rank dimms */
	const u8 spd_addrmap[4] = { 0x50, 0, 0x52, 0 };
#endif
	u8 boot_path = 0;
	u8 s3_resume;

	/* Set up southbridge and Super I/O GPIOs. */
	i82801gx_lpc_setup();
	mb_lpc_setup();
	ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);

	console_init();

	enable_smbus();

	i82801gx_early_init();
	x4x_early_init();

	s3_resume = southbridge_detect_s3_resume();
	if (s3_resume)
		boot_path = BOOT_PATH_RESUME;
	if (MCHBAR32(PMSTS_MCHBAR) & PMSTS_WARM_RESET)
		boot_path = BOOT_PATH_WARM_RESET;

	sdram_initialize(boot_path, spd_addrmap);

	x4x_late_init(s3_resume);

	printk(BIOS_DEBUG, "x4x late init complete\n");

}