chip northbridge/intel/sandybridge device cpu_cluster 0 on chip cpu/intel/model_206ax register "acpi_c1" = "1" register "acpi_c2" = "3" register "acpi_c3" = "5" register "tcc_offset" = "5" # TCC of 95C device lapic 0 on end device lapic 0xacac off end end end device domain 0 on subsystemid 0x1028 0x052c inherit device pci 00.0 on end # Host bridge Host bridge device pci 01.0 on # PEG1 (blue slot1) smbios_slot_desc "0xB6" "4" "SLOT1" "0x0D" end device pci 02.0 on end # Internal graphics VGA controller device pci 06.0 off end # PEG2 chip southbridge/intel/bd82x6x # Intel Series 7 Panther Point PCH register "gpe0_en" = "0x00000146" register "alt_gp_smi_en" = "0x0004" register "gpi2_routing" = "1" register "gpi12_routing" = "2" register "gen1_dec" = "0x007c0a01" register "gen2_dec" = "0x007c0901" register "gen3_dec" = "0x003c07e1" register "gen4_dec" = "0x001c0901" register "pcie_port_coalesce" = "1" register "sata_interface_speed_support" = "0x3" register "sata_port_map" = "0x7" register "spi_lvscc" = "0x2005" register "spi_uvscc" = "0x2005" register "superspeed_capable_ports" = "0x0000000f" register "xhci_overcurrent_mapping" = "0x08040201" register "xhci_switchable_ports" = "0x0000000f" device pci 14.0 on end # USB 3.0 Controller device pci 16.0 off end # Management Engine Interface 1 device pci 16.1 off end # Management Engine Interface 2 device pci 16.2 off end # Management Engine IDE-R device pci 16.3 off end # Management Engine KT device pci 19.0 on end # Intel Gigabit Ethernet device pci 1a.0 on end # USB2 EHCI #2 device pci 1b.0 on end # High Definition Audio controller device pci 1c.0 off end # PCIe Port #1 device pci 1c.1 off end # PCIe Port #2 device pci 1c.2 off end # PCIe Port #3 device pci 1c.3 off end # PCIe Port #4 device pci 1c.4 on # PCIe Port #5 smbios_slot_desc "0xB6" "4" "SLOT2" "0x0A" end device pci 1c.5 on end # PCIe Port #6 device pci 1c.6 on end # PCIe Port #7 device pci 1c.7 on end # PCIe Port #8 device pci 1d.0 on end # USB2 EHCI #1 device pci 1e.0 off end # PCI bridge device pci 1f.0 on # LPC bridge chip drivers/pc80/tpm device pnp 0c31.0 on end end chip superio/smsc/sch5545 device pnp 2e.c on # LPC io 0x60 = 0x2e end device pnp 2e.0 on # EMI io 0x60 = 0xa40 end device pnp 2e.1 on # KBC/PS2M io 0x60 = 0x60 irq 0x70 = 1 irq 0x72 = 12 end device pnp 2e.7 on # UART1 io 0x60 = 0x3f8 irq 0x70 = 4 irq 0xf0 = 0x02 end device pnp 2e.8 off end # UART2 device pnp 2e.a on # Runtime registers io 0x60 = 0xa00 irq 0x70 = 9 # PME end device pnp 2e.b off end # Floppy device pnp 2e.11 off end # PP end end device pci 1f.2 on end # SATA Controller 1 device pci 1f.3 on end # SMBus device pci 1f.5 off end # SATA Controller 2 device pci 1f.6 on end # Thermal end end end