chip soc/intel/tigerlake device cpu_cluster 0 on register "tcc_offset" = "12" register "eist_enable" = "true" end device domain 0 on subsystemid 0x1558 0x14a1 inherit device ref system_agent on register "power_limits_config[POWER_LIMITS_U_4_CORE]" = "{ .tdp_pl1_override = 20, .tdp_pl2_override = 30, .psys_pmax = 65, }" register "power_limits_config[POWER_LIMITS_U_2_CORE]" = "{ .tdp_pl1_override = 20, .tdp_pl2_override = 30, .psys_pmax = 65, }" register "SaGv" = "SaGv_Enabled" register "enable_c6dram" = "true" end device ref igpu on register "gfx" = "GMA_DEFAULT_PANEL(0)" # eDP register "DdiPortAConfig" = "DDI_PORT_CFG_EDP" register "DdiPortAHpd" = "1" register "DdiPortADdc" = "0" # HDMI register "DdiPortBConfig" = "DDI_PORT_CFG_NO_LFP" register "DdiPortBHpd" = "1" register "DdiPortBDdc" = "1" end device ref dptf on end device ref tbt_pcie_rp0 on end device ref tbt_dma0 on chip drivers/intel/usb4/retimer register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A23)" use tcss_usb3_port1 as dfp[0].typec_port device generic 0 on end end end device ref north_xhci on register "UsbTcPortEn" = "true" register "TcssXhciEn" = "true" chip drivers/usb/acpi device ref tcss_root_hub on chip drivers/usb/acpi register "desc" = ""USB3 J_TYPEC1"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "group" = "ACPI_PLD_GROUP(1, 1)" device ref tcss_usb3_port1 on end end end end end device ref south_xhci on # USB2 register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # Type-A, left (J_USB3_1) register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)" # Type-A, right (J_USB3_2) register "usb2_ports[2]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C (J_TYPEC1) register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # 3G/LTE register "usb2_ports[6]" = "USB2_PORT_MAX(OC_SKIP)" # Camera register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth # USB3 register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A, left (J_USB3_1) register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A, right (J_USB3_2) register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # 3G/LTE # ACPI chip drivers/usb/acpi device ref xhci_root_hub on chip drivers/usb/acpi register "desc" = ""USB2 J_USB3_1"" register "type" = "UPC_TYPE_A" register "group" = "ACPI_PLD_GROUP(1, 2)" device ref usb2_port1 on end end chip drivers/usb/acpi register "desc" = ""USB2 J_USB3_2"" register "type" = "UPC_TYPE_A" register "group" = "ACPI_PLD_GROUP(2, 1)" device ref usb2_port2 on end end chip drivers/usb/acpi register "desc" = ""USB2 J_TYPEC1"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "group" = "ACPI_PLD_GROUP(1, 1)" device ref usb2_port3 on end end chip drivers/usb/acpi register "desc" = ""USB2 3G/LTE"" register "type" = "UPC_TYPE_INTERNAL" device ref usb2_port4 on end end chip drivers/usb/acpi register "desc" = ""USB2 Camera"" register "type" = "UPC_TYPE_INTERNAL" device ref usb2_port7 on end end chip drivers/usb/acpi register "desc" = ""USB2 Bluetooth"" register "type" = "UPC_TYPE_INTERNAL" device ref usb2_port10 on end end chip drivers/usb/acpi register "desc" = ""USB3 J_USB3_1"" register "type" = "UPC_TYPE_A" register "group" = "ACPI_PLD_GROUP(1, 1)" device ref usb3_port1 on end end chip drivers/usb/acpi register "desc" = ""USB3 J_USB3_2"" register "type" = "UPC_TYPE_A" register "group" = "ACPI_PLD_GROUP(2, 1)" device ref usb3_port2 on end end chip drivers/usb/acpi register "desc" = ""USB3 3G/LTE"" register "type" = "UPC_TYPE_INTERNAL" device ref usb3_port4 on end end end end end device ref i2c0 on register "SerialIoI2cMode[PchSerialIoIndexI2C0]" = "PchSerialIoPci" register "common_soc_config.i2c[0]" = "{ .speed = I2C_SPEED_FAST, .rise_time_ns = 80, .fall_time_ns = 110, .speed_config[0] = { .speed = I2C_SPEED_FAST, .scl_lcnt = 0x13b, .scl_hcnt = 0xc8, .sda_hold = 0x5a, } }" chip drivers/i2c/hid register "generic.hid" = ""ELAN040D"" register "generic.desc" = ""ELAN Touchpad"" register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)" register "generic.detect" = "1" register "hid_desc_reg_offset" = "0x01" device i2c 15 on end end end device ref i2c1 on # Retimer ROM register "SerialIoI2cMode[PchSerialIoIndexI2C1]" = "PchSerialIoPci" end device ref cnvi_wifi on register "CnviBtCore" = "true" chip drivers/wifi/generic register "wake" = "GPE0_PME_B0" device generic 0 on end end end device ref pcie_rp3 on register "PcieRpEnable[2]" = "true" register "PcieRpLtrEnable[2]" = "true" register "PcieClkSrcUsage[1]" = "2" register "PcieClkSrcClkReq[1]" = "1" register "PcieRpSlotImplemented[2]" = "true" smbios_slot_desc "SlotTypeM2Socket1_SD" "SlotLengthOther" "M.2/E 2230 (J_WLAN1)" "SlotDataBusWidth1X" chip drivers/wifi/generic device pci 00.0 on end end end device ref pcie_rp6 on # Card reader device pci 00.0 on end register "PcieRpEnable[5]" = "true" register "PcieRpLtrEnable[5]" = "true" register "PcieClkSrcUsage[2]" = "5" register "PcieClkSrcClkReq[2]" = "2" end device ref pcie_rp9 on # SSD2 - PCIe mode register "PcieRpEnable[8]" = "true" register "PcieRpLtrEnable[8]" = "true" register "PcieClkSrcUsage[0]" = "8" register "PcieClkSrcClkReq[0]" = "0" register "PcieRpSlotImplemented[8]" = "true" smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M.2/M 2280 (J_SSD2)" "SlotDataBusWidth4X" chip soc/intel/common/block/pcie/rtd3 device generic 0 on end register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D14)" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D9)" register "srcclk_pin" = "0" end end device ref peg on # SSD1 - PCIe4 register "PcieClkSrcUsage[3]" = "0x40" register "PcieClkSrcClkReq[3]" = "3" #register "CpuPcieRpLtrEnable[0]" = "true" # currently set in ramstage.c #register "CpuPcieRpSlotImplemented[0]" = "true" # currently set in ramstage.c smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M.2/M 2280 (J_SSD1)" "SlotDataBusWidth4X" chip soc/intel/common/block/pcie/rtd3 device generic 0 on end register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C13)" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C22)" register "srcclk_pin" = "3" end end device ref pch_espi on chip ec/clevo/it5570e device generic 0 on end register "pl2_on_battery" = "15" end chip drivers/pc80/tpm device pnp 0c31.0 on end end end device ref sata on # SSD2 - SATA mode register "SataPortsEnable[1]" = "true" register "SataPortsDevSlp[1]" = "true" register "SataPortsEnableDitoConfig[1]" = "true" register "SataSalpSupport" = "true" end device ref pmc hidden register "AcousticNoiseMitigation" = "true" register "SlowSlewRate" = "SLEW_FAST_4" register "FastPkgCRampDisable" = "true" register "PchPmSlpS3MinAssert" = "3" # 50ms register "PchPmSlpS4MinAssert" = "1" # 1s register "PchPmSlpAMinAssert" = "4" # 2s register "PchPmSlpSusMinAssert" = "4" # 4s register "PchPmPwrCycDur" = "0" # 4-5s register "s0ix_enable" = "true" chip drivers/intel/pmc_mux device generic 0 on chip drivers/intel/pmc_mux/conn use usb2_port3 as usb2_port use tcss_usb3_port1 as usb3_port device generic 0 alias conn0 on end end end end end device ref hda on register "PchHdaAudioLinkHdaEnable" = "true" end device ref uart2 on register "SerialIoUartMode[PchSerialIoIndexUART2]" = "PchSerialIoSkipInit" end device ref heci1 on end device ref smbus on end device ref shared_ram on end device ref p2sb hidden end device ref fast_spi on end end end