chip soc/intel/tigerlake
	device cpu_cluster 0 on
		register "tcc_offset" = "12"
		register "eist_enable" = "true"
		device lapic 0 on end
	end
	device domain 0 on
		subsystemid 0x1558 0x14a1 inherit
		device ref system_agent on
			register "power_limits_config[POWER_LIMITS_U_4_CORE]" = "{
				.tdp_pl1_override = 20,
				.tdp_pl2_override = 30,
				.psys_pmax = 65,
			}"
			register "power_limits_config[POWER_LIMITS_U_2_CORE]" = "{
				.tdp_pl1_override = 20,
				.tdp_pl2_override = 30,
				.psys_pmax = 65,
			}"
			register "SaGv" = "SaGv_Enabled"
			register "enable_c6dram" = "true"
		end
		device ref igpu on
			register "gfx" = "GMA_DEFAULT_PANEL(0)"
			# eDP
			register "DdiPortAConfig" = "DDI_PORT_CFG_EDP"
			register "DdiPortAHpd" = "1"
			register "DdiPortADdc" = "0"
			# HDMI
			register "DdiPortBConfig" = "DDI_PORT_CFG_NO_LFP"
			register "DdiPortBHpd" = "1"
			register "DdiPortBDdc" = "1"
		end
		device ref dptf on end
		device ref tbt_pcie_rp0 on end
		device ref tbt_dma0 on
			chip drivers/intel/usb4/retimer
				register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A23)"
				use tcss_usb3_port1 as dfp[0].typec_port
				device generic 0 on end
			end
		end
		device ref north_xhci on
			register "UsbTcPortEn" = "true"
			register "TcssXhciEn" = "true"
			chip drivers/usb/acpi
				device ref tcss_root_hub on
					chip drivers/usb/acpi
						register "desc" = ""USB3 J_TYPEC1""
						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
						register "group" = "ACPI_PLD_GROUP(1, 1)"
						device ref tcss_usb3_port1 on end
					end
				end
			end
		end
		device ref south_xhci on
			# USB2
			register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)"	# Type-A, left (J_USB3_1)
			register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)"	# Type-A, right (J_USB3_2)
			register "usb2_ports[2]" = "USB2_PORT_TYPE_C(OC_SKIP)"	# Type-C (J_TYPEC1)
			register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)"	# 3G/LTE
			register "usb2_ports[6]" = "USB2_PORT_MAX(OC_SKIP)"	# Camera
			register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)"	# Bluetooth
			# USB3
			register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)"	# Type-A, left (J_USB3_1)
			register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)"	# Type-A, right (J_USB3_2)
			register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)"	# 3G/LTE
			# ACPI
			chip drivers/usb/acpi
				device ref xhci_root_hub on
					chip drivers/usb/acpi
						register "desc" = ""USB2 J_USB3_1""
						register "type" = "UPC_TYPE_A"
						register "group" = "ACPI_PLD_GROUP(1, 2)"
						device ref usb2_port1 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 J_USB3_2""
						register "type" = "UPC_TYPE_A"
						register "group" = "ACPI_PLD_GROUP(2, 1)"
						device ref usb2_port2 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 J_TYPEC1""
						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
						register "group" = "ACPI_PLD_GROUP(1, 1)"
						device ref usb2_port3 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 3G/LTE""
						register "type" = "UPC_TYPE_INTERNAL"
						device ref usb2_port4 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Camera""
						register "type" = "UPC_TYPE_INTERNAL"
						device ref usb2_port7 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Bluetooth""
						register "type" = "UPC_TYPE_INTERNAL"
						device ref usb2_port10 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB3 J_USB3_1""
						register "type" = "UPC_TYPE_A"
						register "group" = "ACPI_PLD_GROUP(1, 1)"
						device ref usb3_port1 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB3 J_USB3_2""
						register "type" = "UPC_TYPE_A"
						register "group" = "ACPI_PLD_GROUP(2, 1)"
						device ref usb3_port2 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB3 3G/LTE""
						register "type" = "UPC_TYPE_INTERNAL"
						device ref usb3_port4 on end
					end
				end
			end
		end
		device ref i2c0 on
			register "SerialIoI2cMode[PchSerialIoIndexI2C0]" = "PchSerialIoPci"
			register "common_soc_config.i2c[0]" = "{
				.speed = I2C_SPEED_FAST,
				.rise_time_ns = 80,
				.fall_time_ns = 110,
				.speed_config[0] = {
					.speed = I2C_SPEED_FAST,
					.scl_lcnt = 0x13b,
					.scl_hcnt = 0xc8,
					.sda_hold = 0x5a,
				}
			}"
			chip drivers/i2c/hid
				register "generic.hid" = ""ELAN040D""
				register "generic.desc" = ""ELAN Touchpad""
				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
				register "generic.detect" = "1"
				register "hid_desc_reg_offset" = "0x01"
				device i2c 15 on end
			end
		end
		device ref i2c1 on # Retimer ROM
			register "SerialIoI2cMode[PchSerialIoIndexI2C1]" = "PchSerialIoPci"
		end
		device ref cnvi_wifi on
			register "CnviBtCore" = "true"
			chip drivers/wifi/generic
				register "wake" = "GPE0_PME_B0"
				device generic 0 on end
			end
		end
		device ref pcie_rp3 on
			register "PcieRpEnable[2]" = "true"
			register "PcieRpLtrEnable[2]" = "true"
			register "PcieClkSrcUsage[1]" = "2"
			register "PcieClkSrcClkReq[1]" = "1"
			register "PcieRpSlotImplemented[2]" = "true"
			smbios_slot_desc "SlotTypeM2Socket1_SD" "SlotLengthOther" "M.2/E 2230 (J_WLAN1)" "SlotDataBusWidth1X"
			chip drivers/wifi/generic
				device pci 00.0 on end
			end
		end
		device ref pcie_rp6 on
			# Card reader
			device pci 00.0 on end
			register "PcieRpEnable[5]" = "true"
			register "PcieRpLtrEnable[5]" = "true"
			register "PcieClkSrcUsage[2]" = "5"
			register "PcieClkSrcClkReq[2]" = "2"
		end
		device ref pcie_rp9 on
			# SSD2 - PCIe mode
			register "PcieRpEnable[8]" = "true"
			register "PcieRpLtrEnable[8]" = "true"
			register "PcieClkSrcUsage[0]" = "8"
			register "PcieClkSrcClkReq[0]" = "0"
			register "PcieRpSlotImplemented[8]" = "true"
			smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M.2/M 2280 (J_SSD2)" "SlotDataBusWidth4X"
			chip soc/intel/common/block/pcie/rtd3
				device generic 0 on end
				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D14)"
				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D9)"
				register "srcclk_pin" = "0"
			end
		end
		device ref peg on
			# SSD1 - PCIe4
			register "PcieClkSrcUsage[3]" = "0x40"
			register "PcieClkSrcClkReq[3]" = "3"
			#register "CpuPcieRpLtrEnable[0]" = "true"       # currently set in ramstage.c
			#register "CpuPcieRpSlotImplemented[0]" = "true" # currently set in ramstage.c
			smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M.2/M 2280 (J_SSD1)" "SlotDataBusWidth4X"
			chip soc/intel/common/block/pcie/rtd3
				device generic 0 on end
				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C13)"
				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C22)"
				register "srcclk_pin" = "3"
			end
		end
		device ref pch_espi on
			chip drivers/pc80/tpm
				device pnp 0c31.0 on end
			end
		end
		device ref sata on
			# SSD2 - SATA mode
			register "SataPortsEnable[1]" = "true"
			register "SataPortsDevSlp[1]" = "true"
			register "SataPortsEnableDitoConfig[1]" = "true"
			register "SataSalpSupport" = "true"
		end
		device ref pmc hidden
			register "AcousticNoiseMitigation" = "true"
			register "SlowSlewRate" = "SLEW_FAST_4"
			register "FastPkgCRampDisable" = "true"
			register "PchPmSlpS3MinAssert" = "3" # 50ms
			register "PchPmSlpS4MinAssert" = "1" # 1s
			register "PchPmSlpAMinAssert" = "4" # 2s
			register "PchPmSlpSusMinAssert" = "4" # 4s
			register "PchPmPwrCycDur" = "0" # 4-5s
			register "s0ix_enable" = "true"
			chip drivers/intel/pmc_mux
				device generic 0 on
					chip drivers/intel/pmc_mux/conn
						use usb2_port3 as usb2_port
						use tcss_usb3_port1 as usb3_port
						device generic 0 alias conn0 on end
					end
				end
			end
		end
		device ref hda on
			register "PchHdaAudioLinkHdaEnable" = "true"
		end
		device ref uart2 on
			register "SerialIoUartMode[PchSerialIoIndexUART2]" = "PchSerialIoSkipInit"
		end
		device ref heci1 on end
		device ref smbus on end
		device ref shared_ram on end
		device ref p2sb hidden end
		device ref fast_spi on end
	end
end