/* * This file is part of the coreboot project. * * Copyright (C) 2012 Advanced Micro Devices, Inc. * Copyright (C) 2015 Sergej Ivanov <getinaks@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include <device/azalia.h> #include <AGESA.h> #include <console/console.h> #include <northbridge/amd/agesa/BiosCallOuts.h> #include <northbridge/amd/agesa/state_machine.h> #include <FchPlatform.h> #include <stdlib.h> const BIOS_CALLOUT_STRUCT BiosCallouts[] = { {AGESA_DO_RESET, agesa_Reset }, {AGESA_READ_SPD, agesa_ReadSpd }, {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, {AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData }, {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, {AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage } }; const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); /** * CODEC Initialization Table for Azalia HD Audio using Realtek ALC662 chip (from linux, running under vendor bios) */ const CODEC_ENTRY Alc662_VerbTbl[] = { { 0x14, 0x01014410 }, { 0x15, 0x411111f0 }, { 0x16, 0x411111f0 }, { 0x18, 0x01a19c30 }, { 0x19, 0x02a19c40 }, { 0x1a, 0x0181343f }, { 0x1b, 0x02214c20 }, { 0x1c, 0x411111f0 }, { 0x1d, 0x4004c601 }, { 0x1e, 0x411111f0 }, { 0xff, 0xffffffff } }; static const CODEC_TBL_LIST CodecTableList[] = { {0x10ec0662, (CODEC_ENTRY*)&Alc662_VerbTbl[0]}, {(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL} }; #define FAN_INPUT_INTERNAL_DIODE 0 #define FAN_INPUT_TEMP0 1 #define FAN_INPUT_TEMP1 2 #define FAN_INPUT_TEMP2 3 #define FAN_INPUT_TEMP3 4 #define FAN_INPUT_TEMP0_FILTER 5 #define FAN_INPUT_ZERO 6 #define FAN_INPUT_DISABLED 7 #define FAN_AUTOMODE (1 << 0) #define FAN_LINEARMODE (1 << 1) #define FAN_STEPMODE ~(1 << 1) #define FAN_POLARITY_HIGH (1 << 2) #define FAN_POLARITY_LOW ~(1 << 2) /* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */ #define FREQ_28KHZ 0x0 #define FREQ_25KHZ 0x1 #define FREQ_23KHZ 0x2 #define FREQ_21KHZ 0x3 #define FREQ_29KHZ 0x4 #define FREQ_18KHZ 0x5 #define FREQ_100HZ 0xF7 #define FREQ_87HZ 0xF8 #define FREQ_58HZ 0xF9 #define FREQ_44HZ 0xFA #define FREQ_35HZ 0xFB #define FREQ_29HZ 0xFC #define FREQ_22HZ 0xFD #define FREQ_14HZ 0xFE #define FREQ_11HZ 0xFF void board_FCH_InitReset(struct sysinfo *cb_NA, FCH_RESET_DATA_BLOCK *FchParams_reset) { FchParams_reset->LegacyFree = CONFIG(HUDSON_LEGACY_FREE); FchParams_reset->Mode = 6; } void board_FCH_InitEnv(struct sysinfo *cb_NA, FCH_DATA_BLOCK *FchParams_env) { /* Azalia Controller OEM Codec Table Pointer */ FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&CodecTableList[0]); /* Fan Control */ FchParams_env->Imc.ImcEnable = FALSE; FchParams_env->Hwm.HwMonitorEnable = FALSE; FchParams_env->Hwm.HwmFchtsiAutoPoll = FALSE;/* 1 enable, 0 disable TSI Auto Polling */ FchParams_env->Sata.SataClass = CONFIG_HUDSON_SATA_MODE; switch ((SATA_CLASS)CONFIG_HUDSON_SATA_MODE) { // code from olivehillplus (ft3b) - only one place where sata is configured case SataLegacyIde: case SataRaid: case SataAhci: case SataAhci7804: FchParams_env->Sata.SataIdeMode = FALSE; printk(BIOS_DEBUG, "AHCI or RAID or IDE = %x\n", CONFIG_HUDSON_SATA_MODE); break; case SataIde2Ahci: case SataIde2Ahci7804: default: /* SataNativeIde */ FchParams_env->Sata.SataIdeMode = TRUE; printk(BIOS_DEBUG, "IDE2AHCI = %x\n", CONFIG_HUDSON_SATA_MODE); break; } }