/* * This file is part of the coreboot project. * * Copyright (C) 2012 Advanced Micro Devices, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file * * AMD User options selection for a Brazos platform solution system * * This file is placed in the user's platform directory and contains the * build option selections desired for that platform. * * For Information about this file, see @ref platforminstall. * * @xrefitem bom "File Content Label" "Release Content" * @e project: AGESA * @e sub-project: Core * @e \$Revision: 23714 $ @e \$Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $ */ #include "AGESA.h" //#include "CommonReturns.h" #include "Filecode.h" #define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE /* Select the cpu family. */ #define INSTALL_FAMILY_10_SUPPORT FALSE #define INSTALL_FAMILY_12_SUPPORT FALSE #define INSTALL_FAMILY_14_SUPPORT FALSE #define INSTALL_FAMILY_15_MODEL_1x_SUPPORT TRUE /* Select the cpu socket type. */ #define INSTALL_G34_SOCKET_SUPPORT FALSE #define INSTALL_C32_SOCKET_SUPPORT FALSE #define INSTALL_S1G3_SOCKET_SUPPORT FALSE #define INSTALL_S1G4_SOCKET_SUPPORT FALSE #define INSTALL_ASB2_SOCKET_SUPPORT FALSE #define INSTALL_FS1_SOCKET_SUPPORT FALSE #define INSTALL_FM1_SOCKET_SUPPORT FALSE #define INSTALL_FP2_SOCKET_SUPPORT FALSE #define INSTALL_FT1_SOCKET_SUPPORT FALSE #define INSTALL_AM3_SOCKET_SUPPORT FALSE #define INSTALL_FM2_SOCKET_SUPPORT TRUE //#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE #define BLDOPT_REMOVE_SODIMMS_SUPPORT TRUE #define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE #define BLDOPT_REMOVE_LRDIMMS_SUPPORT TRUE #define BLDOPT_REMOVE_ECC_SUPPORT TRUE //#define BLDOPT_REMOVE_BANK_INTERLEAVE TRUE //#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE #define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE #define BLDOPT_REMOVE_PARALLEL_TRAINING TRUE #define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE //#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT TRUE #define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE //#define BLDOPT_REMOVE_ACPI_PSTATES FALSE #define BLDOPT_REMOVE_SRAT FALSE //TRUE #define BLDOPT_REMOVE_SLIT FALSE //TRUE #define BLDOPT_REMOVE_WHEA FALSE //TRUE #define BLDOPT_REMOVE_CRAT TRUE //#define BLDOPT_REMOVE_DMI FALSE //TRUE //#define BLDOPT_REMOVE_EARLY_SAMPLES FALSE //#define BLDCFG_REMOVE_ACPI_PSTATES_PPC TRUE //#define BLDCFG_REMOVE_ACPI_PSTATES_PCT TRUE //#define BLDCFG_REMOVE_ACPI_PSTATES_PSD TRUE //#define BLDCFG_REMOVE_ACPI_PSTATES_PSS TRUE //#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS TRUE //This element selects whether P-States should be forced to be independent, // as reported by the ACPI _PSD object. For single-link processors, // setting TRUE for OS to support this feature. //#define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT TRUE #define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS #define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER /* Build configuration values here. */ #define BLDCFG_VRM_CURRENT_LIMIT 90000 #define BLDCFG_VRM_LOW_POWER_THRESHOLD 0 #define BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT 0 #define BLDCFG_PLAT_NUM_IO_APICS 3 #define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST #define BLDCFG_MEM_INIT_PSTATE 0 #define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE #define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1866_FREQUENCY #define BLDCFG_MEMORY_MODE_UNGANGED TRUE #define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE #define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED #define BLDCFG_MEMORY_RDIMM_CAPABLE FALSE #define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE #define BLDCFG_MEMORY_SODIMM_CAPABLE FALSE #define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE #define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE #define BLDCFG_MEMORY_CHANNEL_INTERLEAVING TRUE #define BLDCFG_MEMORY_POWER_DOWN TRUE #define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT #define BLDCFG_ONLINE_SPARE FALSE #define BLDCFG_BANK_SWIZZLE TRUE #define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO #define BLDCFG_MEMORY_CLOCK_SELECT DDR1600_FREQUENCY #define BLDCFG_DQS_TRAINING_CONTROL TRUE #define BLDCFG_IGNORE_SPD_CHECKSUM FALSE #define BLDCFG_USE_BURST_MODE FALSE #define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE #define BLDCFG_ENABLE_ECC_FEATURE FALSE #define BLDCFG_ECC_REDIRECTION FALSE #define BLDCFG_SCRUB_DRAM_RATE 0 #define BLDCFG_SCRUB_L2_RATE 0 #define BLDCFG_SCRUB_L3_RATE 0 #define BLDCFG_SCRUB_IC_RATE 0 #define BLDCFG_SCRUB_DC_RATE 0 #define BLDCFG_ECC_SYMBOL_SIZE 4 #define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000 #define BLDCFG_ECC_SYNC_FLOOD FALSE #define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE #define BLDCFG_1GB_ALIGN FALSE #define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE #define BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM 36 // PCIE Spread Spectrum default value 0.36% #define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x1770 #define BLDOPT_REMOVE_ALIB FALSE #define BLDCFG_PLATFORM_CPB_MODE CpbModeDisabled #define BLDCFG_PROCESSOR_SCOPE_NAME0 'P' #define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' #define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6 #define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 200 #define BLDCFG_CFG_ABM_SUPPORT 0 //#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x1770 // Specify the default values for the VRM controlling the VDDNB plane. // If not specified, the values used for the core VRM will be applied //#define BLDCFG_VRM_NB_CURRENT_LIMIT 0 // Not currently used on Trinity //#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1 // Zero - disable NBPSI_L, Non-zero - enable NBPSI_L //#define BLDCFG_VRM_NB_SLEW_RATE 5000 // Used in calculating the VSRampSlamTime //#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0 // Not currently used on Trinity //#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE 0 // Not currently used on Trinity //#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0 // Not currently used on Trinity #define BLDCFG_VRM_NB_CURRENT_LIMIT 60000 #define BLDCFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON 3 #define BLDCFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL 3 #if CONFIG_GFXUMA #define BLDCFG_UMA_ALIGNMENT UMA_4MB_ALIGNED #define BLDCFG_UMA_ALLOCATION_MODE UMA_SPECIFIED //#define BLDCFG_UMA_ALLOCATION_SIZE 0x1000//0x1800//0x1000 /* (1000 << 16) = 256M*/ #define BLDCFG_UMA_ALLOCATION_SIZE 0x2000//512M #define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE #endif #define BLDCFG_IOMMU_SUPPORT TRUE #define BLDCFG_CFG_GNB_HD_AUDIO TRUE //#define BLDCFG_IGPU_SUBSYSTEM_ID OEM_IGPU_SSID //#define BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID OEM_IGPU_HD_AUDIO_SSID //#define BLFCFG_APU_PCIE_PORTS_SUBSYSTEM_ID OEM_APU_PCIE_PORTS_SSID /* Process the options... * This file include MUST occur AFTER the user option selection settings */ #define AGESA_ENTRY_INIT_RESET TRUE #define AGESA_ENTRY_INIT_RECOVERY FALSE #define AGESA_ENTRY_INIT_EARLY TRUE #define AGESA_ENTRY_INIT_POST TRUE #define AGESA_ENTRY_INIT_ENV TRUE #define AGESA_ENTRY_INIT_MID TRUE #define AGESA_ENTRY_INIT_LATE TRUE #define AGESA_ENTRY_INIT_S3SAVE TRUE #define AGESA_ENTRY_INIT_RESUME TRUE //TRUE #define AGESA_ENTRY_INIT_LATE_RESTORE TRUE #define AGESA_ENTRY_INIT_GENERAL_SERVICES TRUE /* * Customized OEM build configurations for FCH component */ // #define BLDCFG_SMBUS0_BASE_ADDRESS 0xB00 // #define BLDCFG_SMBUS1_BASE_ADDRESS 0xB20 // #define BLDCFG_SIO_PME_BASE_ADDRESS 0xE00 // #define BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS 0x400 // #define BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS 0x404 // #define BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS 0x408 // #define BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS 0x410 // #define BLDCFG_ACPI_GPE0_BLOCK_ADDRESS 0x420 // #define BLDCFG_SPI_BASE_ADDRESS 0xFEC10000 // #define BLDCFG_WATCHDOG_TIMER_BASE 0xFEC00000 // #define BLDCFG_HPET_BASE_ADDRESS 0xFED00000 // #define BLDCFG_SMI_CMD_PORT_ADDRESS 0xB0 // #define BLDCFG_ACPI_PMA_BLK_ADDRESS 0xFE00 // #define BLDCFG_ROM_BASE_ADDRESS 0xFED61000 // #define BLDCFG_AZALIA_SSID 0x780D1022 // #define BLDCFG_SMBUS_SSID 0x780B1022 // #define BLDCFG_IDE_SSID 0x780C1022 // #define BLDCFG_SATA_AHCI_SSID 0x78011022 // #define BLDCFG_SATA_IDE_SSID 0x78001022 // #define BLDCFG_SATA_RAID5_SSID 0x78031022 // #define BLDCFG_SATA_RAID_SSID 0x78021022 // #define BLDCFG_EHCI_SSID 0x78081022 // #define BLDCFG_OHCI_SSID 0x78071022 // #define BLDCFG_LPC_SSID 0x780E1022 // #define BLDCFG_SD_SSID 0x78061022 // #define BLDCFG_XHCI_SSID 0x78121022 // #define BLDCFG_FCH_PORT80_BEHIND_PCIB FALSE // #define BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE // #define BLDCFG_FCH_GPP_LINK_CONFIG PortA4 // #define BLDCFG_FCH_GPP_PORT0_PRESENT FALSE // #define BLDCFG_FCH_GPP_PORT1_PRESENT FALSE // #define BLDCFG_FCH_GPP_PORT2_PRESENT FALSE // #define BLDCFG_FCH_GPP_PORT3_PRESENT FALSE // #define BLDCFG_FCH_GPP_PORT0_HOTPLUG FALSE // #define BLDCFG_FCH_GPP_PORT1_HOTPLUG FALSE // #define BLDCFG_FCH_GPP_PORT2_HOTPLUG FALSE // #define BLDCFG_FCH_GPP_PORT3_HOTPLUG FALSE CONST AP_MTRR_SETTINGS ROMDATA TrinityApMtrrSettingsList[] = { { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E }, { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E }, { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000 }, { AMD_AP_MTRR_FIX4k_C0000, 0x0000000000000000 }, { AMD_AP_MTRR_FIX4k_C8000, 0x0000000000000000 }, { AMD_AP_MTRR_FIX4k_D0000, 0x0000000000000000 }, { AMD_AP_MTRR_FIX4k_D8000, 0x0000000000000000 }, { AMD_AP_MTRR_FIX4k_E0000, 0x1818181818181818 }, { AMD_AP_MTRR_FIX4k_E8000, 0x1818181818181818 }, { AMD_AP_MTRR_FIX4k_F0000, 0x1818181818181818 }, { AMD_AP_MTRR_FIX4k_F8000, 0x1818181818181818 }, { CPU_LIST_TERMINAL } }; #define BLDCFG_AP_MTRR_SETTINGS_LIST &TrinityApMtrrSettingsList //#include "VirgoInstall.h" /* Include the files that instantiate the configuration definitions. */ #include "cpuRegisters.h" #include "cpuFamRegisters.h" #include "cpuFamilyTranslation.h" #include "AdvancedApi.h" #include "heapManager.h" #include "CreateStruct.h" #include "cpuFeatures.h" #include "Table.h" #include "CommonReturns.h" #include "cpuEarlyInit.h" #include "cpuLateInit.h" #include "GnbInterface.h" // This is the delivery package title, "BrazosPI" // This string MUST be exactly 8 characters long #define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'} // This is the release version number of the AGESA component // This string MUST be exactly 12 characters long #define AGESA_VERSION_STRING {'V', '0', '.', '0', '.', '0', '.', '1', ' ', ' ', ' ', ' '} /* MEMORY_BUS_SPEED */ #define DDR400_FREQUENCY 200 ///< DDR 400 #define DDR533_FREQUENCY 266 ///< DDR 533 #define DDR667_FREQUENCY 333 ///< DDR 667 #define DDR800_FREQUENCY 400 ///< DDR 800 #define DDR1066_FREQUENCY 533 ///< DDR 1066 #define DDR1333_FREQUENCY 667 ///< DDR 1333 #define DDR1600_FREQUENCY 800 ///< DDR 1600 #define DDR1866_FREQUENCY 933 ///< DDR 1866 #define DDR2100_FREQUENCY 1050 ///< DDR 2100 #define DDR2133_FREQUENCY 1066 ///< DDR 2133 #define DDR2400_FREQUENCY 1200 ///< DDR 2400 #define UNSUPPORTED_DDR_FREQUENCY 1201 ///< Highest limit of DDR frequency /* QUANDRANK_TYPE*/ #define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM #define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM /* USER_MEMORY_TIMING_MODE */ #define TIMING_MODE_AUTO 0 ///< Use best rate possible #define TIMING_MODE_LIMITED 1 ///< Set user top limit #define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed /* POWER_DOWN_MODE */ #define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode #define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode /* * Agesa optional capabilities selection. * Uncomment and mark FALSE those features you wish to include in the build. * Comment out or mark TRUE those features you want to REMOVE from the build. */ #define DFLT_SMBUS0_BASE_ADDRESS 0xB00 #define DFLT_SMBUS1_BASE_ADDRESS 0xB20 #define DFLT_SIO_PME_BASE_ADDRESS 0xE00 #define DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS 0x800 #define DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS 0x804 #define DFLT_ACPI_PM_TMR_BLOCK_ADDRESS 0x808 #define DFLT_ACPI_CPU_CNT_BLOCK_ADDRESS 0x810 #define DFLT_ACPI_GPE0_BLOCK_ADDRESS 0x820 #define DFLT_SPI_BASE_ADDRESS 0xFEC10000 #define DFLT_WATCHDOG_TIMER_BASE_ADDRESS 0xFEC000F0 #define DFLT_HPET_BASE_ADDRESS 0xFED00000 #define DFLT_SMI_CMD_PORT 0xB0 #define DFLT_ACPI_PMA_CNT_BLK_ADDRESS 0xFE00 #define DFLT_GEC_BASE_ADDRESS 0xFED61000 #define DFLT_AZALIA_SSID 0x780D1022 #define DFLT_SMBUS_SSID 0x780B1022 #define DFLT_IDE_SSID 0x780C1022 #define DFLT_SATA_AHCI_SSID 0x78011022 #define DFLT_SATA_IDE_SSID 0x78001022 #define DFLT_SATA_RAID5_SSID 0x78031022 #define DFLT_SATA_RAID_SSID 0x78021022 #define DFLT_EHCI_SSID 0x78081022 #define DFLT_OHCI_SSID 0x78071022 #define DFLT_LPC_SSID 0x780E1022 #define DFLT_SD_SSID 0x78061022 #define DFLT_XHCI_SSID 0x78121022 #define DFLT_FCH_PORT80_BEHIND_PCIB FALSE #define DFLT_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE #define DFLT_FCH_GPP_LINK_CONFIG PortA1B1C1D1 #define DFLT_FCH_GPP_PORT0_PRESENT TRUE #define DFLT_FCH_GPP_PORT1_PRESENT TRUE #define DFLT_FCH_GPP_PORT2_PRESENT FALSE #define DFLT_FCH_GPP_PORT3_PRESENT FALSE #define DFLT_FCH_GPP_PORT0_HOTPLUG FALSE #define DFLT_FCH_GPP_PORT1_HOTPLUG FALSE #define DFLT_FCH_GPP_PORT2_HOTPLUG FALSE #define DFLT_FCH_GPP_PORT3_HOTPLUG FALSE //#define BLDCFG_IR_PIN_CONTROL 0x33 //#define FCH_NO_XHCI_SUPPORT FALSE GPIO_CONTROL f2a85_m_gpio[] = { // {183, Function1, PullUpB}, {-1} }; #define BLDCFG_FCH_GPIO_CONTROL_LIST (&f2a85_m_gpio[0]) // The following definitions specify the default values for various parameters in which there are // no clearly defined defaults to be used in the common file. The values below are based on product // and BKDG content, please consult the AGESA Memory team for consultation. #define DFLT_SCRUB_DRAM_RATE (0) #define DFLT_SCRUB_L2_RATE (0) #define DFLT_SCRUB_L3_RATE (0) #define DFLT_SCRUB_IC_RATE (0) #define DFLT_SCRUB_DC_RATE (0) #define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED #define DFLT_VRM_SLEW_RATE (5000) #include "PlatformInstall.h" /*---------------------------------------------------------------------------------------- * CUSTOMER OVERIDES MEMORY TABLE *---------------------------------------------------------------------------------------- */ /* * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable * is populated, AGESA will base its settings on the data from the table. Otherwise, it will * use its default conservative settings. */ CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { // // The following macros are supported (use comma to separate macros): // // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. // AGESA will base on this value to disable unused MemClk to save power. // Example: // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: // Bit AM3/S1g3 pin name // 0 M[B,A]_CLK_H/L[0] // 1 M[B,A]_CLK_H/L[1] // 2 M[B,A]_CLK_H/L[2] // 3 M[B,A]_CLK_H/L[3] // 4 M[B,A]_CLK_H/L[4] // 5 M[B,A]_CLK_H/L[5] // 6 M[B,A]_CLK_H/L[6] // 7 M[B,A]_CLK_H/L[7] // And platform has the following routing: // CS0 M[B,A]_CLK_H/L[4] // CS1 M[B,A]_CLK_H/L[2] // CS2 M[B,A]_CLK_H/L[3] // CS3 M[B,A]_CLK_H/L[5] // Then platform can specify the following macro: // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) // // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. // AGESA will base on this value to tristate unused CKE to save power. // // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. // AGESA will base on this value to tristate unused ODT pins to save power. // // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. // AGESA will base on this value to tristate unused Chip select to save power. // // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) // Specifies the number of DIMM slots per channel. // // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) // Specifies the number of Chip selects per channel. // // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) // Specifies the number of channels per socket. // // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) // Specifies DDR bus speed of channel ChannelID on socket SocketID. // // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) // // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, // Byte6Seed, Byte7Seed, ByteEccSeed) // Specifies the write leveling seed for a channel of a socket. // // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, // Byte6Seed, Byte7Seed, ByteEccSeed) // Speicifes the HW RXEN training seed for a channel of a socket // NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 2), /* TODO: is this OK for DDR3 socket FM2? MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x05, 0x0A), ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00), CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), */ PSO_END }; /* * These tables are optional and may be used to adjust memory timing settings */ #include "mm.h" #include "mn.h" // Customer table UINT8 AGESA_MEM_TABLE_TN[][sizeof (MEM_TABLE_ALIAS)] = { // Hardcoded Memory Training Values // The following macro should be used to override training values for your platform // // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20), // // NOTE: // The following training hardcode values are example values that were taken from a tilapia motherboard // with a particular DIMM configuration. To hardcode your own values, uncomment the appropriate line in // the table and replace the byte lane values with your own. // // ------------------ BYTE LANES ---------------------- // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC // Write Data Timing // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0 // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1 // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0 // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1 // DQS Receiver Enable // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1 // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0 // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1 // Write DQS Delays // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1 // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0 // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1 // Read DQS Delays // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0 // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1 // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0 // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1 //-------------------------------------------------------------------------------------------------------------------------------------------------- // TABLE END NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table }; UINT8 SizeOfTableTN = sizeof (AGESA_MEM_TABLE_TN) / sizeof (AGESA_MEM_TABLE_TN[0]); /* *************************************************************************** * Optional User code to be included into the AGESA build * These may be 32-bit call-out routines... */ //AGESA_STATUS //AgesaReadSpd ( // IN UINTN FcnData, // IN OUT AGESA_READ_SPD_PARAMS *ReadSpd // ) //{ // /* platform code to read an SPD... */ // return Status; //}