/* SPDX-License-Identifier: GPL-2.0-only */ #include <AGESA.h> #include <PlatformMemoryConfiguration.h> #include <northbridge/amd/agesa/state_machine.h> static const PCIe_PORT_DESCRIPTOR PortList[] = { { 0, PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 3, 3), PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 2, 5, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 0x01, 0) }, /* Initialize Port descriptor (PCIe port, Lanes 1, PCI Device Number 2, ...) */ { 0, PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 2, 2), PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 2, 4, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 0x02, 0) }, /* Initialize Port descriptor (PCIe port, Lanes 2, PCI Device Number 2, ...) */ { 0, PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 1, 1), PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 2, 3, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 0x03, 0) }, /* Initialize Port descriptor (PCIe port, Lanes 3, PCI Device Number 2, ...) */ { 0, PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 0, 0), PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 2, 2, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 0x04, 0) }, /* Initialize Port descriptor (PCIe port, Lanes 4-7, PCI Device Number 4, ...) */ { DESCRIPTOR_TERMINATE_LIST, PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 4, 7), PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 2, 1, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 0x05, 0) } }; static const PCIe_DDI_DESCRIPTOR DdiList[] = { /* DP0 to HDMI */ { 0, PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 8, 11), PCIE_DDI_DATA_INITIALIZER(ConnectorTypeHDMI, Aux1, Hdp1) }, /* DP1 to DVI-D */ { 0, PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 12, 15), PCIE_DDI_DATA_INITIALIZER(ConnectorTypeSingleLinkDVI, Aux2, Hdp2) }, /* DP2 to VGA */ { DESCRIPTOR_TERMINATE_LIST, PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 16, 19), PCIE_DDI_DATA_INITIALIZER(ConnectorTypeCrt, Aux3, Hdp3) }, }; static const PCIe_COMPLEX_DESCRIPTOR PcieComplex = { .Flags = DESCRIPTOR_TERMINATE_LIST, .SocketId = 0, .PciePortList = PortList, .DdiLinkList = DdiList }; void board_BeforeInitReset(struct sysinfo *cb, AMD_RESET_PARAMS *Reset) { FCH_RESET_INTERFACE *FchReset = &Reset->FchInterface; FchReset->Xhci0Enable = CONFIG(HUDSON_XHCI_ENABLE); FchReset->Xhci1Enable = CONFIG(HUDSON_XHCI_ENABLE); FchReset->SataEnable = 1; FchReset->IdeEnable = 0; } void board_BeforeInitEarly(struct sysinfo *cb, AMD_EARLY_PARAMS *InitEarly) { InitEarly->GnbConfig.PcieComplexList = &PcieComplex; } /*---------------------------------------------------------------------------------------- * CUSTOMER OVERRIDES MEMORY TABLE *---------------------------------------------------------------------------------------- */ /* * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable * is populated, AGESA will base its settings on the data from the table. Otherwise, it will * use its default conservative settings. */ static CONST PSO_ENTRY ROMDATA PlatformMemoryTable[] = { #define SEED_A 0x12 HW_RXEN_SEED( ANY_SOCKET, CHANNEL_A, ALL_DIMMS, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A), NUMBER_OF_DIMMS_SUPPORTED(ANY_SOCKET, ANY_CHANNEL, 2), NUMBER_OF_CHANNELS_SUPPORTED(ANY_SOCKET, 1), MOTHER_BOARD_LAYERS(LAYERS_4), MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), CKE_TRI_MAP(ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), /* TODO: bit2map, bit3map */ ODT_TRI_MAP(ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), CS_TRI_MAP(ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), PSO_END }; void board_BeforeInitPost(struct sysinfo *cb, AMD_POST_PARAMS *InitPost) { InitPost->MemConfig.PlatformMemoryConfiguration = (PSO_ENTRY *)PlatformMemoryTable; } void board_BeforeInitMid(struct sysinfo *cb, AMD_MID_PARAMS *InitMid) { /* 0 iGpuVgaAdapter, 1 iGpuVgaNonAdapter; */ InitMid->GnbMidConfiguration.iGpuVgaMode = 0; }