/* SPDX-License-Identifier: GPL-2.0-only */

#include <stdint.h>
#include <arch/romstage.h>
#include <cpu/intel/haswell/haswell.h>
#include <device/pnp_ops.h>
#include <northbridge/intel/haswell/haswell.h>
#include <northbridge/intel/haswell/pei_data.h>
#include <southbridge/intel/common/gpio.h>
#include <southbridge/intel/lynxpoint/pch.h>

void mainboard_config_rcba(void)
{
	RCBA16(D31IR) = DIR_ROUTE(PIRQA, PIRQD, PIRQC, PIRQA);
	RCBA16(D29IR) = DIR_ROUTE(PIRQH, PIRQD, PIRQA, PIRQC);
	RCBA16(D28IR) = DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD);
	RCBA16(D27IR) = DIR_ROUTE(PIRQG, PIRQB, PIRQC, PIRQD);
	RCBA16(D26IR) = DIR_ROUTE(PIRQA, PIRQF, PIRQC, PIRQD);
	RCBA16(D25IR) = DIR_ROUTE(PIRQE, PIRQF, PIRQG, PIRQH);
	RCBA16(D22IR) = DIR_ROUTE(PIRQA, PIRQD, PIRQC, PIRQB);
	RCBA16(D20IR) = DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD);
}

void mainboard_romstage_entry(void)
{
	struct pei_data pei_data = {
		.pei_version = PEI_VERSION,
		.mchbar = (uintptr_t)DEFAULT_MCHBAR,
		.dmibar = (uintptr_t)DEFAULT_DMIBAR,
		.epbar = DEFAULT_EPBAR,
		.pciexbar = CONFIG_MMCONF_BASE_ADDRESS,
		.smbusbar = SMBUS_IO_BASE,
		.hpet_address = HPET_ADDR,
		.rcba = (uintptr_t)DEFAULT_RCBA,
		.pmbase = DEFAULT_PMBASE,
		.gpiobase = DEFAULT_GPIOBASE,
		.temp_mmio_base = 0xfed08000,
		.system_type = 1, /* desktop/server */
		.tseg_size = CONFIG_SMM_TSEG_SIZE,
		.spd_addresses = { 0xa0, 0x00, 0xa4, 0x00 },
		.ec_present = 0,
		.dimm_channel0_disabled = 2, /* Disable DIMM 1 on channel 0. */
		.dimm_channel1_disabled = 2, /* Disable DIMM 1 on channel 1. */
		.max_ddr3_freq = 1600,
		.usb2_ports = {
			/* Length, Enable, OCn#, Location */
			{ 0x0040, 1, 0, USB_PORT_BACK_PANEL },
			{ 0x0040, 1, 0, USB_PORT_BACK_PANEL },
			{ 0x0040, 1, 1, USB_PORT_BACK_PANEL },
			{ 0x0040, 1, 1, USB_PORT_BACK_PANEL },
			{ 0x0040, 1, 2, USB_PORT_BACK_PANEL },
			{ 0x0040, 1, 2, USB_PORT_BACK_PANEL },
			{ 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP },
			{ 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP },
			{ 0x0040, 1, 4, USB_PORT_BACK_PANEL },
			{ 0x0040, 1, 4, USB_PORT_BACK_PANEL },
			{ 0x0040, 1, 5, USB_PORT_BACK_PANEL },
			{ 0x0040, 1, 5, USB_PORT_BACK_PANEL },
			{ 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP },
			{ 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP },
		},
		.usb3_ports = {
			/* Enable, OCn# */
			{ 1, 0 },
			{ 1, 0 },
			{ 0, USB_OC_PIN_SKIP },
			{ 0, USB_OC_PIN_SKIP },
			{ 0, USB_OC_PIN_SKIP },
			{ 0, USB_OC_PIN_SKIP },
		},
	};

	struct romstage_params romstage_params = {
		.pei_data = &pei_data,
	};

	romstage_common(&romstage_params);
}