uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
uses USE_FALLBACK_IMAGE
uses USE_NORMAL_IMAGE
uses AMD8111_DEV
uses MAINBOARD
uses ARCH
#
#
###
### Set all of the defaults for an x86 architecture
###
#
#
###
### Build the objects we have code for in this directory.
###
##object mainboard.o
driver mainboard.o
object static_devices.o
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
#
arch i386 end
#cpu k8 end
#
###
### Build our 16 bit and 32 bit linuxBIOS entry code
###
mainboardinit cpu/i386/entry16.inc
mainboardinit cpu/i386/entry32.inc
ldscript /cpu/i386/entry16.lds
ldscript /cpu/i386/entry32.lds
#
###
### Build our reset vector (This is where linuxBIOS is entered)
###
if USE_FALLBACK_IMAGE 
  mainboardinit cpu/i386/reset16.inc 
  ldscript /cpu/i386/reset16.lds 
else
  print "NO FALLBACK USED!"
end

if USE_NORMAL_IMAGE
  mainboardinit cpu/i386/reset32.inc 
  ldscript /cpu/i386/reset32.lds 
end
#
#### Should this be in the northbridge code?
mainboardinit arch/i386/lib/cpu_reset.inc
#
###
### Include an id string (For safe flashing)
###
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
#
####
#### This is the early phase of linuxBIOS startup 
#### Things are delicate and we test to see if we should
#### failover to another image.
####
#option MAX_REBOOT_CNT=2
if USE_FALLBACK_IMAGE
  ldscript /arch/i386/lib/failover.lds 
end
#
###
### Setup our mtrrs
###
mainboardinit cpu/k8/earlymtrr.inc
###
### Only the bootstrap cpu makes it here.
### Failover if we need to 
###
#
if USE_FALLBACK_IMAGE
  mainboardinit ./failover.inc
#  mainboardinit southbridge/amd/amd8111/cmos_boot_failover.inc 
end

#
#
###
### Setup the serial port
###
#mainboardinit superiowinbond/w83627hf/setup_serial.inc
mainboardinit pc80/serial.inc
mainboardinit arch/i386/lib/console.inc
#
####
#### O.k. We aren't just an intermediary anymore!
####
#
###
### When debugging disable the watchdog timer
###
##option MAXIMUM_CONSOLE_LOGLEVEL=7
#default MAXIMUM_CONSOLE_LOGLEVEL=7
#option DISABLE_WATCHDOG= (MAXIMUM_CONSOLE_LOGLEVEL >= 8) 
#if DISABLE_WATCHDOG
#  mainboardinit southbridgeamd/amd8111/disable_watchdog.inc 
#end
#
#if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc  end
#
###
### Romcc output
###
#makerule ./failover.E dep "$(MAINBOARD)/failover.c" act "$(CPP) -I$(TOP)/src $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failever.E"
#makerule ./failover.inc dep "./romcc ./failover.E" act "./romcc -O ./failover.E > failover.inc"
#mainboardinit .failover.inc

makerule ./failover.E
	depends "$(MAINBOARD)/failover.c" 
	action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E"
end

makerule ./failover.inc
	depends "./romcc ./failover.E"
	action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"end

makerule ./auto.E 
	depends	"$(MAINBOARD)/auto.c" 
	action	"$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
end
makerule ./auto.inc 
	depends "./romcc ./auto.E" 
	action	"./romcc -mcpu=k8  -O ./auto.E > auto.inc"
end
mainboardinit cpu/k8/enable_mmx_sse.inc
mainboardinit ./auto.inc
mainboardinit cpu/k8/disable_mmx_sse.inc
#
###
### Setup RAM
###
#mainboardinit ram/ramtest.inc
#mainboardinit southbridge/amd/amd8111/smbus.inc
#mainboardinit sdram/generic_dump_spd.inc
#
###
### Include the secondary Configuration files 
###
northbridge amd/amdk8
end
southbridge amd/amd8111 "amd8111"
end
southbridge amd/amd8131 "amd8131"
end
#mainboardinit archi386/smp/secondary.inc
superio NSC/pc87360
	register "com1" = "{1}"
	register "lpt" = "{1}"
end
# dir /pc80
##dir /src/superio/winbond/w83627hf
dir /cpu/k8
cpu k8 "cpu0" 
  register "up" = "{.chip = &amd8111, .ht_width=8, .ht_speed=200}"
end

cpu k8 "cpu1" 
end