/* * This file is part of the coreboot project. * * Copyright (C) 2012 Advanced Micro Devices, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include #include #include #include #include #include #include #include #include #include #include #include #include "agesawrapper.h" #include "cpu/x86/bist.h" #include "cpu/x86/lapic/boot_cpu.c" #include "southbridge/amd/agesa/hudson/hudson.h" #include "src/superio/smsc/lpc47n217/early_serial.c" #include "cpu/amd/agesa/s3_resume.h" #include "src/drivers/pc80/i8254.c" #include "src/drivers/pc80/i8259.c" #include "cbmem.h" #define SERIAL_DEV PNP_DEV(0x2e, LPC47N217_SP1) void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx); void disable_cache_as_ram(void); void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { u32 val; u8 byte; device_t dev; #if CONFIG_HAVE_ACPI_RESUME void *resume_backup_memory; #endif val = agesawrapper_amdinitmmio(); hudson_lpc_port80(); //__asm__ volatile ("1: jmp 1b"); /* TODO: */ dev = PCI_DEV(0, 0x14, 3);//pci_locate_device(PCI_ID(0x1002, 0x439D), 0); byte = pci_read_config8(dev, 0x48); byte |= 3; /* 2e, 2f */ pci_write_config8(dev, 0x48, byte); if (!cpu_init_detectedx && boot_cpu()) { post_code(0x30); post_code(0x31); lpc47n217_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); outb(0x24, 0xcd6); outb(0x1, 0xcd7); outb(0xea, 0xcd6); outb(0x1, 0xcd7); *(u8 *)0xfed80101 = 0x98; console_init(); } /* Halt if there was a built in self test failure */ post_code(0x34); report_bist_failure(bist); /* Load MPB */ val = cpuid_eax(1); printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val); printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx); post_code(0x37); val = agesawrapper_amdinitreset(); if(val) { printk(BIOS_DEBUG, "agesawrapper_amdinitreset failed: %x \n", val); } post_code(0x38); printk(BIOS_DEBUG, "Got past sb800_early_setup\n"); post_code(0x39); val = agesawrapper_amdinitearly (); if(val) { printk(BIOS_DEBUG, "agesawrapper_amdinitearly failed: %x \n", val); } printk(BIOS_DEBUG, "Got past agesawrapper_amdinitearly\n"); #if CONFIG_HAVE_ACPI_RESUME if (!acpi_is_wakeup_early()) { /* Check for S3 resume */ #endif post_code(0x40); val = agesawrapper_amdinitpost (); if(val) { printk(BIOS_DEBUG, "agesawrapper_amdinitpost failed: %x \n", val); } printk(BIOS_DEBUG, "Got past agesawrapper_amdinitpost\n"); post_code(0x41); val = agesawrapper_amdinitenv (); if(val) { printk(BIOS_DEBUG, "agesawrapper_amdinitenv failed: %x \n", val); } printk(BIOS_DEBUG, "Got past agesawrapper_amdinitenv\n"); disable_cache_as_ram(); #if CONFIG_HAVE_ACPI_RESUME } else { /* S3 detect */ printk(BIOS_INFO, "S3 detected\n"); post_code(0x60); printk(BIOS_DEBUG, "agesawrapper_amdinitresume "); val = agesawrapper_amdinitresume(); if (val) printk(BIOS_DEBUG, "error level: %x \n", val); else printk(BIOS_DEBUG, "passed.\n"); printk(BIOS_DEBUG, "agesawrapper_amds3laterestore "); val = agesawrapper_amds3laterestore (); if (val) printk(BIOS_DEBUG, "error level: %x \n", val); else printk(BIOS_DEBUG, "passed.\n"); post_code(0x61); printk(BIOS_DEBUG, "Find resume memory location\n"); resume_backup_memory = (void *)backup_resume(); post_code(0x62); printk(BIOS_DEBUG, "Move CAR stack.\n"); move_stack_high_mem(); printk(BIOS_DEBUG, "stack moved to: 0x%x\n", (u32) (resume_backup_memory + HIGH_MEMORY_SAVE)); post_code(0x63); disable_cache_as_ram(); printk(BIOS_DEBUG, "CAR disabled.\n"); set_resume_cache(); /* * Copy the system memory that is in the ramstage area to the * reserved area. */ if (resume_backup_memory) memcpy(resume_backup_memory, (void *)(CONFIG_RAMBASE), HIGH_MEMORY_SAVE); printk(BIOS_DEBUG, "System memory saved. OK to load ramstage.\n"); } #endif /* Initialize i8259 pic */ post_code(0x41); setup_i8259 (); /* Initialize i8254 timers */ post_code(0x42); setup_i8254 (); post_code(0x50); copy_and_run(0); post_code(0x54); /* Should never see this post code. */ }