#
# This file is part of the coreboot project.
#
# Copyright (C) 2011 Advanced Micro Devices, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
chip northbridge/amd/agesa/family14/root_complex
	device cpu_cluster 0 on
		chip cpu/amd/agesa/family14
			device lapic 0 on end
		end
	end
	device domain 0 on
		subsystemid 0x1022 0x1510 inherit
		chip northbridge/amd/agesa/family14
			device pci 0.0 on end # Root Complex
			device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456]
			device pci 4.0 on end # PCIE P2P bridge on-board NIC
			device pci 5.0 off end # PCIE P2P bridge
			device pci 6.0 on end # PCIE P2P bridge PCIe slot
			device pci 7.0 off end # PCIE P2P bridge
			device pci 8.0 off end # NB/SB Link P2P bridge
		end # agesa northbridge

		chip southbridge/amd/cimx/sb800
			device pci 11.0 on end # SATA
			device pci 12.0 on end # OHCI USB 0-4
			device pci 12.2 on end # EHCI USB 0-4
			device pci 13.0 on end # OHCI USB 5-9
			device pci 13.2 on end # EHCI USB 5-9
			device pci 14.0 on # SM
				chip drivers/generic/generic #dimm 0-0-0
					device i2c 50 on end
				end
				chip drivers/generic/generic #dimm 0-0-1
					device i2c 51 on end
				end
			end # SM
			device pci 14.1 on end # IDE	0x439c
			device pci 14.2 on end # HDA	0x4383
			device pci 14.3 on # LPC		0x439d
				chip superio/fintek/f81865f
					device pnp 4e.0 off		# Floppy
						io 0x60 = 0x3f0
						irq 0x70 = 6
						drq 0x74 = 2
					end
					device pnp 4e.3 off end			# Parallel Port
					device pnp 4e.4 off end			# Hardware Monitor
					device pnp 4e.5 on #  Keyboard
						io 0x60 = 0x60
						io 0x62 = 0x64
						irq 0x70 = 1
					end
					device pnp 4e.6 off end			# GPIO
					device pnp 4e.a off end			# PME
					device pnp 4e.10 on			# COM1
						io 0x60 = 0x3f8
						irq 0x70 = 4
					end
					device pnp 4e.11 on			# COM2
						io 0x60 = 0x2f8
						irq 0x70 = 3
					end
				end # f81865f
			end #LPC
			device pci 14.4 on  end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0}
			device pci 14.5 off end # OHCI FS/LS USB
			device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699)
			device pci 15.0 off end # PCIe PortA
			device pci 15.1 off end # PCIe PortB
			device pci 15.2 off end # PCIe PortC
			device pci 15.3 off end # PCIe PortD
			device pci 16.0 off end # OHCI USB 10-13
			device pci 16.2 off end # EHCI USB 10-13
			register "gpp_configuration" = "0" #4:0:0:0 (really need to disable all 4 somehow)
			register "boot_switch_sata_ide" = "0"	# 0: boot from SATA. 1: IDE

			#set up SB800 Fan control registers and IMC fan controls
			register "imc_port_address" = "0x6E"	# 0x2E and 0x6E are common
			register "fan0_enabled" = "1"
			register "fan1_enabled" = "1"
			register "imc_fan_zone0_enabled" = "1"
			register "imc_fan_zone1_enabled" = "1"

			register "fan0_config_vals" = "{ \
				FAN_INPUT_INTERNAL_DIODE, FAN_POLARITY_HIGH, \
				FREQ_25KHZ, 0x08, 0x00, 0x00, 0x00, 0x00,\
				0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }"
			register "fan1_config_vals" = "{ \
				FAN_INPUT_INTERNAL_DIODE, FAN_POLARITY_HIGH, \
				FREQ_25KHZ, 0x10, 0x00, 0x00, 0x00, 0x00, \
				0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }"

			register "imc_zone0_mode1" = " \
				IMC_MODE1_FAN_ENABLED | IMC_MODE1_FAN_IMC_CONTROLLED | \
				IMC_MODE1_FAN_STEP_MODE | IMC_MODE1_FANOUT0"
			register "imc_zone0_mode2" = " IMC_MODE2_TEMPIN_SB_TSI | \
				IMC_MODE2_FANIN0 | IMC_MODE2_TEMP_AVERAGING_DISABLED"
			register "imc_zone0_temp_offset" = "0x00"	# No temp offset
			register "imc_zone0_hysteresis" = "0x05"	# Degrees C Hysteresis
			register "imc_zone0_smbus_addr" = "0x98"	# Temp Sensor SMBus address
			register "imc_zone0_smbus_num" = "IMC_TEMP_SENSOR_ON_SMBUS_3"	# SMBUS number
			register "imc_zone0_pwm_step" = "0x01"		# Fan PWM stepping rate
			register "imc_zone0_ramping" = "0x00"		# Disable Fan PWM ramping and stepping

			register "imc_zone1_mode1" = " \
				IMC_MODE1_FAN_ENABLED | IMC_MODE1_FAN_IMC_CONTROLLED | \
				IMC_MODE1_FAN_STEP_MODE | IMC_MODE1_FANOUT1"
			register "imc_zone1_mode2" = " IMC_MODE2_TEMPIN_SB_TSI | \
				IMC_MODE2_FANIN1 | IMC_MODE2_TEMP_AVERAGING_DISABLED"
			register "imc_zone1_temp_offset" = "0x00"	# No temp offset
			register "imc_zone1_hysteresis" = "0x05"	# Degrees C Hysteresis
			register "imc_zone1_smbus_addr" = "0x98"	# Temp Sensor SMBus address
			register "imc_zone1_smbus_num" = "IMC_TEMP_SENSOR_ON_SMBUS_3"	# SMBUS number
			register "imc_zone1_pwm_step" = "0x01"		# Fan PWM stepping rate
			register "imc_zone1_ramping" = "0x00"		# Disable Fan PWM ramping and stepping

			# T56N has a Maximum operating temperature  of 90C
			# ZONEX_THRESHOLDS - _AC0 - _AC7, _CRT - Temp Threshold in degrees C
			# ZONEX_FANSPEEDS - Fan speeds as a "percentage"
			register "imc_zone0_thresholds" = "{ 87, 82, 77, 72, 65, 1, 0, 0, 90 }"
			register "imc_zone0_fanspeeds"  = "{100,  7,  5,  4,  3, 2, 0, 0 }"
			register "imc_zone1_thresholds" = "{ 85, 80, 75, 65,  1, 0, 0, 0, 90 }"
			register "imc_zone1_fanspeeds"  = "{100, 10,  6,  4,  3, 0, 0, 0 }"

		end	#southbridge/amd/cimx/sb800

		chip northbridge/amd/agesa/family14

			# These seem unnecessary
			device pci 18.0 on end
			device pci 18.1 on end
			device pci 18.2 on end
			device pci 18.3 on end
			device pci 18.4 on end
			device pci 18.5 on end
			device pci 18.6 on end
			device pci 18.7 on end

			register "spdAddrLookup" = "
			{
				{ {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses
				{ {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses
			}"

		end # agesa northbridge

	end #domain
end #northbridge/amd/agesa/family14/root_complex