/* * This file is part of the coreboot project. * * Copyright (C) 2011 Advanced Micro Devices, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include "AGESA.h" #include "amdlib.h" #include <northbridge/amd/agesa/BiosCallOuts.h> #include "heapManager.h" #include "SB800.h" #include <stdlib.h> static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINTN Data, VOID *ConfigPtr); static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINTN Data, VOID *ConfigPtr); const BIOS_CALLOUT_STRUCT BiosCallouts[] = { {AGESA_DO_RESET, agesa_Reset }, {AGESA_READ_SPD, agesa_ReadSpd }, {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, {AGESA_GNB_PCIE_SLOT_RESET, board_GnbPcieSlotReset }, {AGESA_HOOKBEFORE_DRAM_INIT, board_BeforeDramInit }, {AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY, agesa_NoopSuccess }, {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, }; const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); /* Call the host environment interface to provide a user hook opportunity. */ static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINTN Data, VOID *ConfigPtr) { // Unlike e.g. AMD Inagua, Persimmon is unable to vary the RAM voltage. // Make sure the right speed settings are selected. ((MEM_DATA_STRUCT*)ConfigPtr)->ParameterListPtr->DDR3Voltage = VOLT1_5; return AGESA_SUCCESS; } /* PCIE slot reset control */ static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINTN Data, VOID *ConfigPtr) { AGESA_STATUS Status; UINTN FcnData; PCIe_SLOT_RESET_INFO *ResetInfo; UINT32 GpioMmioAddr; UINT32 AcpiMmioAddr; UINT8 Data8; UINT16 Data16; FcnData = Data; ResetInfo = ConfigPtr; // Get SB800 MMIO Base (AcpiMmioAddr) WriteIo8(0xCD6, 0x27); Data8 = ReadIo8(0xCD7); Data16=Data8<<8; WriteIo8(0xCD6, 0x26); Data8 = ReadIo8(0xCD7); Data16|=Data8; AcpiMmioAddr = (UINT32)Data16 << 16; Status = AGESA_UNSUPPORTED; GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; switch (ResetInfo->ResetId) { case 46: // GPIO50 = SBGPIO_PCIE_RST# affects LAN0, LAN1, PCIe slot switch (ResetInfo->ResetControl) { case AssertSlotReset: Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG50); Data8 &= ~(UINT8)BIT6 ; Write64Mem8(GpioMmioAddr+SB_GPIO_REG50, Data8); Status = AGESA_SUCCESS; break; case DeassertSlotReset: Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG50); Data8 |= BIT6 ; Write64Mem8 (GpioMmioAddr+SB_GPIO_REG50, Data8); Status = AGESA_SUCCESS; break; } break; } return Status; }