/* SPDX-License-Identifier: GPL-2.0-only */ #include <bootstate.h> #include <superio/fintek/common/fan_control.h> #include <amdblocks/lpc.h> #include <device/pci_ops.h> #include <soc/pci_devs.h> #define CPU_FAN 1 #define SYSTEM_FAN 2 /* Boundaries in celsius, sections in percent */ static u8 cpu_boudaries[FINTEK_BOUNDARIES_SIZE] = { 80, 65, 50, 35 }; static u8 system_boudaries[FINTEK_BOUNDARIES_SIZE] = { 70, 55, 40, 25 }; static u8 cpu_section[FINTEK_SECTIONS_SIZE] = { 100, 85, 70, 55, 40 }; static u8 system_section[FINTEK_SECTIONS_SIZE] = { 100, 85, 70, 55, 40 }; struct fintek_fan cpu_fan = { CPU_FAN, IGNORE_SENSOR, TEMP_SENSOR_DEFAULT, FAN_TEMP_TSI, FAN_TYPE_PWM_PUSH_PULL, FAN_MODE_DEFAULT, FAN_PWM_FREQ_23500, FAN_UP_RATE_10HZ, FAN_DOWN_RATE_10HZ, FAN_FOLLOW_INTERPOLATION, cpu_boudaries, cpu_section }; struct fintek_fan system_fan = { SYSTEM_FAN, EXTERNAL_SENSOR2, TEMP_SENSOR_BJT, FAN_TEMP_EXTERNAL_2, FAN_TYPE_DAC_POWER, FAN_MODE_DEFAULT, FAN_PWM_FREQ_23500, FAN_UP_RATE_10HZ, FAN_DOWN_RATE_10HZ, FAN_FOLLOW_INTERPOLATION, system_boudaries, system_section }; static void init_fan_control(void *unused) { /* Open a LPC IO access to 0x0220-0x0227 */ pci_or_config32(SOC_LPC_DEV, LPC_IO_PORT_DECODE_ENABLE, DECODE_ENABLE_SERIAL_PORT2); set_fan(&cpu_fan); set_fan(&system_fan); } BOOT_STATE_INIT_ENTRY(BS_POST_DEVICE, BS_ON_ENTRY, init_fan_control, NULL);