# SPDX-License-Identifier: GPL-2.0-only

if BOARD_AMD_MANDOLIN || BOARD_AMD_CEREME

config BOARD_SPECIFIC_OPTIONS
	def_bool y
	select SOC_AMD_COMMON_BLOCK_USE_ESPI
	select SOC_AMD_PICASSO
	select BOARD_ROMSIZE_KB_8192 if BOARD_AMD_MANDOLIN
	select BOARD_ROMSIZE_KB_16384 if BOARD_AMD_CEREME
	select AZALIA_HDA_CODEC_SUPPORT
	select HAVE_ACPI_RESUME
	select DRIVERS_UART_ACPI
	select AMD_SOC_CONSOLE_UART if !AMD_LPC_DEBUG_CARD
	select AMD_FWM_POSITION_420000_DEFAULT if BOARD_AMD_MANDOLIN
	select AMD_FWM_POSITION_820000_DEFAULT if BOARD_AMD_CEREME

config FMDFILE
	default "src/mainboard/amd/mandolin/variants/\$(CONFIG_VARIANT_DIR)/board.fmd"

config AMD_LPC_DEBUG_CARD
	bool "Enable LPC-Serial debug card on the debug header"
	default n
	select MANDOLIN_LPC
	select SUPERIO_SMSC_SIO1036
	help
	  AMD's debug card contains an SMSC SIO1036 device which provides an
	  I/O-mapped UART in the system. This is mutually exclusive with
	  AMD_SOC_CONSOLE_UART which selects the SoC's integrated memory-mapped
	  UART for coreboot console output.

choice
	prompt "SMSC/Microchip 1036 SuperIO config address"
	depends on SUPERIO_SMSC_SIO1036
	default SMSC_SIO1036_BASE_164E

config SMSC_SIO1036_BASE_4E
	bool "0x4e/0x4d base address"

config SMSC_SIO1036_BASE_164E
	bool "0x164e/0x164d base address"

endchoice

config SUPERIO_ADDR_BASE
	hex
	default 0x4e	if SMSC_SIO1036_BASE_4E
	default 0x164e	if SMSC_SIO1036_BASE_164E

config CBFS_SIZE
	default 0x7cf000 if BOARD_AMD_MANDOLIN # Maximum size for the Mandolin FMAP
	default 0xfcf000 if BOARD_AMD_CEREME # Maximum size for the Cereme FMAP

config MAINBOARD_DIR
	default "amd/mandolin"

config VARIANT_DIR
	default "mandolin" if BOARD_AMD_MANDOLIN
	default "cereme" if BOARD_AMD_CEREME

config MAINBOARD_PART_NUMBER
	default "MANDOLIN" if BOARD_AMD_MANDOLIN
	default "CEREME" if BOARD_AMD_CEREME

config DEVICETREE
	default "variants/\$(CONFIG_VARIANT_DIR)/devicetree.cb"

config ONBOARD_VGA_IS_PRIMARY
	bool
	default y

config MANDOLIN_HAVE_MCHP_FW
	bool "Have Microchip EC firmware?"
	default n

config MANDOLIN_MCHP_FW_FILE
	string
	depends on MANDOLIN_HAVE_MCHP_FW
	default "3rdparty/blobs/mainboard/amd/mandolin/EC_mandolin.bin" if BOARD_AMD_MANDOLIN
	default "3rdparty/blobs/mainboard/amd/mandolin/EC_cereme.bin" if BOARD_AMD_CEREME
	help
	  The EC firmware blob is usually the first 128kByte of the stock
	  firmware image.

if !AMD_LPC_DEBUG_CARD
choice
	prompt "State of IOMux for LPC/eMMC signals"
	default MANDOLIN_IOMUX_USE_EMMC
	help
	  Mandolin is designed to use either LPC or eMMC signals.  Use this
	  selection to determine which are configured for this image.

config MANDOLIN_IOMUX_USE_LPC
	bool "LPC signals"

config MANDOLIN_IOMUX_USE_EMMC
	bool "eMMC signals"

endchoice
endif # !AMD_LPC_DEBUG_CARD

config MANDOLIN_LPC
	bool
	default y if MANDOLIN_IOMUX_USE_LPC
	help
	  Picasso's LPC bus signals are MUXed with some of the EMMC signals.
	  Select this option if LPC signals are required.

if !EM100	# EM100 defaults in soc/amd/common/blocks/spi/Kconfig
config EFS_SPI_READ_MODE
	default 3	# Quad IO (1-1-4)

config EFS_SPI_SPEED
	default 0	# 66MHz

config EFS_SPI_MICRON_FLAG
	default 0

config NORMAL_READ_SPI_SPEED
	default 1	# 33MHz

config ALT_SPI_SPEED
	default 1	# 33MHz

config TPM_SPI_SPEED
	default 1	# 33MHz

endif # !EM100

endif # BOARD_AMD_MANDOLIN || BOARD_AMD_CEREME