/* * This file is part of the coreboot project. * * Copyright (C) 2012 Advanced Micro Devices, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /** * @file * * AMD User options selection for a Sabine/Lynx platform solution system * * This file is placed in the user's platform directory and contains the * build option selections desired for that platform. * */ #include #include "AGESA.h" #include "Filecode.h" #define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE //#define OPTION_HW_DQS_REC_EN_TRAINING TRUE /* AGESA will check the OEM configuration during preprocessing stage, * coreboot enable -Wundef option, so we should make sure we have all contanstand defined */ /* MEMORY_BUS_SPEED */ #define DDR400_FREQUENCY 200 ///< DDR 400 #define DDR533_FREQUENCY 266 ///< DDR 533 #define DDR667_FREQUENCY 333 ///< DDR 667 #define DDR800_FREQUENCY 400 ///< DDR 800 #define DDR1066_FREQUENCY 533 ///< DDR 1066 #define DDR1333_FREQUENCY 667 ///< DDR 1333 #define DDR1600_FREQUENCY 800 ///< DDR 1600 #define DDR1866_FREQUENCY 933 ///< DDR 1866 #define UNSUPPORTED_DDR_FREQUENCY 934 ///< Highest limit of DDR frequency /* QUANDRANK_TYPE */ #define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM #define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM /* USER_MEMORY_TIMING_MODE */ #define TIMING_MODE_AUTO 0 ///< Use best rate possible #define TIMING_MODE_LIMITED 1 ///< Set user top limit #define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed /* POWER_DOWN_MODE */ #define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode #define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode /* Select the CPU family. */ /* Select the CPU socket type. */ #define INSTALL_G34_SOCKET_SUPPORT TRUE #define INSTALL_C32_SOCKET_SUPPORT FALSE #define INSTALL_S1G3_SOCKET_SUPPORT FALSE #define INSTALL_S1G4_SOCKET_SUPPORT FALSE #define INSTALL_ASB2_SOCKET_SUPPORT FALSE #define INSTALL_FS1_SOCKET_SUPPORT FALSE #define INSTALL_FM1_SOCKET_SUPPORT FALSE #define INSTALL_FP1_SOCKET_SUPPORT FALSE #define INSTALL_FT1_SOCKET_SUPPORT FALSE #define INSTALL_AM3_SOCKET_SUPPORT FALSE /* * Agesa optional capabilities selection. * Uncomment and mark FALSE those features you wish to include in the build. * Comment out or mark TRUE those features you want to REMOVE from the build. */ /* User makes option selections here * Comment out the items wanted to be included in the build. * Uncomment those items you with to REMOVE from the build. */ //#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE //#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE //#define BLDOPT_REMOVE_ECC_SUPPORT TRUE //#define BLDOPT_REMOVE_BANK_INTERLEAVE TRUE //#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE //#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE #define BLDOPT_REMOVE_PARALLEL_TRAINING TRUE //#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE //#define BLDOPT_REMOVE_DDR3_SUPPORT TRUE //#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE //#define BLDOPT_REMOVE_ACPI_PSTATES TRUE //#define BLDOPT_REMOVE_SRAT TRUE //#define BLDOPT_REMOVE_SLIT TRUE #define BLDOPT_REMOVE_WHEA TRUE //#define BLDOPT_REMOVE_DMI TRUE #define BLDOPT_REMOVE_EARLY_SAMPLES FALSE //#define BLDOPT_REMOVE_FAMILY_15_SUPPORT TRUE /* Build configuration values here. */ #define BLDCFG_VRM_CURRENT_LIMIT 120000 #define BLDCFG_VRM_LOW_POWER_THRESHOLD 0 #define BLDCFG_PLAT_NUM_IO_APICS 2 #define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST #define BLDCFG_MEM_INIT_PSTATE 0 #define BLDCFG_AMD_PSTATE_CAP_VALUE 0 #define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_SERVER #define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1600_FREQUENCY #define BLDCFG_MEMORY_MODE_UNGANGED TRUE #define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE #define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_REGISTERED #define BLDCFG_MEMORY_RDIMM_CAPABLE TRUE #define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE #define BLDCFG_MEMORY_SODIMM_CAPABLE FALSE #define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE #define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING TRUE #define BLDCFG_MEMORY_CHANNEL_INTERLEAVING TRUE #define BLDCFG_MEMORY_POWER_DOWN TRUE #define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT //FALSE #define BLDCFG_ONLINE_SPARE TRUE #define BLDCFG_MEMORY_PARITY_ENABLE TRUE #define BLDCFG_BANK_SWIZZLE TRUE #define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO #define BLDCFG_MEMORY_CLOCK_SELECT DDR800_FREQUENCY #define BLDCFG_DQS_TRAINING_CONTROL TRUE #define BLDCFG_IGNORE_SPD_CHECKSUM FALSE #define BLDCFG_USE_BURST_MODE FALSE #define BLDCFG_MEMORY_ALL_CLOCKS_ON TRUE #define BLDCFG_ENABLE_ECC_FEATURE TRUE #define BLDCFG_ECC_REDIRECTION TRUE #define BLDCFG_SCRUB_IC_RATE 0 #define BLDCFG_ECC_SYNC_FLOOD TRUE #define BLDCFG_ECC_SYMBOL_SIZE 0 #define BLDCFG_1GB_ALIGN FALSE #define BLDCFG_PLATFORM_C1E_MODE C1eModeMsgBased #define BLDCFG_PLATFORM_C1E_OPDATA 0x2000 //#define BLDCFG_USE_ATM_MODE TRUE #define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6 #define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0xCB0 #define BLDCFG_PLATFORM_POWER_POLICY_MODE Performance //BatteryLife //#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeMsgBasedC1e //#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x2000 //#define IDSOPT_IDS_ENABLED TRUE #define BLDCFG_REMOVE_ACPI_PSTATES_PPC TRUE #define BLDOPT_REMOVE_LOW_PWR_PSTATE_FOR_PROCHOT TRUE #define BLDCFG_PSTATE_HPC_MODE FALSE #define BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST &MaranelloOverrideDevCap /* Process the options... * This file include MUST occur AFTER the user option selection settings */ /***************************************************************************** * Define the RELEASE VERSION string * * The Release Version string should identify the next planned release. * When a branch is made in preparation for a release, the release manager * should change/confirm that the branch version of this file contains the * string matching the desired version for the release. The trunk version of * the file should always contain a trailing 'X'. This will make sure that a * development build from trunk will not be confused for a released version. * The release manager will need to remove the trailing 'X' and update the * version string as appropriate for the release. The trunk copy of this file * should also be updated/incremented for the next expected version, + trailing 'X' ****************************************************************************/ // This is the delivery package title, "MarG34PI" // This string MUST be exactly 8 characters long #define AGESA_PACKAGE_STRING {'O', 'r', 'o', 'c', 'h', 'i', 'P', 'I'} // This is the release version number of the AGESA component // This string MUST be exactly 12 characters long #define AGESA_VERSION_STRING {'V', '0', '.', '0', '.', '9', '.', '0', ' ', ' ', ' ', ' '} // The Maranello solution is defined to be families 0x10 and 0x15 models 0x0 - 0xF in the G34 socket. #define INSTALL_G34_SOCKET_SUPPORT TRUE #define INSTALL_FAMILY_10_SUPPORT TRUE #define INSTALL_FAMILY_15_MODEL_0x_SUPPORT TRUE #ifdef BLDOPT_REMOVE_FAMILY_10_SUPPORT #if BLDOPT_REMOVE_FAMILY_10_SUPPORT == TRUE #undef INSTALL_FAMILY_10_SUPPORT #define INSTALL_FAMILY_10_SUPPORT FALSE #endif #endif #ifdef BLDOPT_REMOVE_FAMILY_15_SUPPORT #if BLDOPT_REMOVE_FAMILY_15_SUPPORT == TRUE #undef INSTALL_FAMILY_15_MODEL_0x_SUPPORT #define INSTALL_FAMILY_15_MODEL_0x_SUPPORT FALSE #endif #endif // The following definitions specify the default values for various parameters in which there are // no clearly defined defaults to be used in the common file. The values below are based on product // and BKDG content, please consult the AGESA Memory team for consultation. #define DFLT_SCRUB_DRAM_RATE (0xFF) #define DFLT_SCRUB_L2_RATE (0x10) #define DFLT_SCRUB_L3_RATE (0x10) #define DFLT_SCRUB_IC_RATE (0) #define DFLT_SCRUB_DC_RATE (0x12) #define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_REGISTERED #define DFLT_VRM_SLEW_RATE (2500) /* Process the options... * This file include MUST occur AFTER the user option selection settings */ CONST MANUAL_BUID_SWAP_LIST ROMDATA MaranelloManualBuidSwapList[2] = { { /* On the reference platform, there is only one nc chain, so socket & link are 'don't care' */ HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, { //BUID Swap List { //BUID Swaps /* Each Non-coherent chain may have a list of device swaps, * Each item specify a device will be swap from its current id to a new one */ /* FromID 0x00 is the chain with the southbridge */ /* 'Move' device zero to device zero, All others are non applicable */ {0x00, 0x00}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, }, { //The ordered final BUIDs /* Specify the final BUID to be zero, All others are non applicable */ 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, } } }, /* The 2nd element in the array merely terminates the list */ { HT_LIST_TERMINAL, } }; #define BLDCFG_BUID_SWAP_LIST &MaranelloManualBuidSwapList // And another platform specific one ... //CONST CPU_TO_CPU_PCB_LIMITS ROMDATA MaranelloCpuToCpuLimitList[2] = //{ // HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, // HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_3200M, // HT_LIST_TERMINAL //}; CONST CPU_TO_CPU_PCB_LIMITS ROMDATA MaranelloCpuToCpuLimitList[] = { { /* On the reference platform, these settings apply to all coherent links */ HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, /* Set incoming and outgoing links to 16 bit widths, and 3.2GHz frequencies */ HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_2600M, }, { HT_LIST_MATCH_ANY, HT_LIST_MATCH_INTERNAL_LINK, HT_LIST_MATCH_ANY, HT_LIST_MATCH_INTERNAL_LINK, HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_2600M, }, /* The 2nd element in the array merely terminates the list */ { HT_LIST_TERMINAL, } }; #define BLDCFG_HTFABRIC_LIMITS_LIST &MaranelloCpuToCpuLimitList // A performance-per-watt optimization. CONST SKIP_REGANG ROMDATA PerfPerWatt[] = { { HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, POWERED_OFF }, { HT_LIST_MATCH_ANY, HT_LIST_MATCH_INTERNAL_LINK, HT_LIST_MATCH_ANY, HT_LIST_MATCH_INTERNAL_LINK, POWERED_OFF }, { HT_LIST_TERMINAL } }; // uncomment the line below to make Perf-per-watt enabled by default. #define BLDCFG_LINK_SKIP_REGANG_LIST &PerfPerWatt CONST IO_PCB_LIMITS ROMDATA MaranelloIoLimitList[2] = { { /* On the reference platform, there is only one nc chain, so socket & link are 'don't care' */ HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, /* Set upstream and downstream links to 16 bit widths, and limit frequencies to 3.2GHz */ HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_2600M, //Actually IO hub only support 2600M MAX }, /* The 2nd element in the array merely terminates the list */ { HT_LIST_TERMINAL, } }; #define BLDCFG_HTCHAIN_LIMITS_LIST &MaranelloIoLimitList CONST SYSTEM_PHYSICAL_SOCKET_MAP ROMDATA DinarPhysicalSocketMap[] = { // Source Socket, Link (4-7 are sublink 1), Target Socket {0, 0, 1}, {0, 1, 1}, {0, 3, 1}, {0, 4, 1}, {0, 5, 1}, {0, 7, 1}, }; #define BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP &DinarPhysicalSocketMap /* * PCI Bus numbers for Drachma/Peso board */ CONST OVERRIDE_BUS_NUMBERS ROMDATA MaranelloOverrideBusNumbers[5] = { // Socket, Link, SecBus, SubBus { 0, 2, 0x00, 0xBF }, // RD890 of Dinar { 1, 0, 0xC0, 0xFF }, // HTX { (HT_LIST_TERMINAL) } }; #define BLDCFG_BUS_NUMBERS_LIST &MaranelloOverrideBusNumbers CONST CPU_HT_DEEMPHASIS_LEVEL ROMDATA DinarDeemphasisList[] = { { HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_200M, HT_FREQUENCY_1800M, DeemphasisLevelNone, DcvLevelNone}, { HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_2000M, HT_FREQUENCY_2600M, DeemphasisLevelMinus3, DcvLevelMinus3}, { HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_2800M, HT_FREQUENCY_MAX, DeemphasisLevelMinus6, DcvLevelMinus6}, { (0xFF) } }; #define BLDCFG_PLATFORM_DEEMPHASIS_LIST DinarDeemphasisList /* CONST SKIP_REGANG ROMDATA DinarSkipRegangMap[] = { // {socketA, linkA, socketB, linkB} {0, 0, 1, 1}, }; #define BLDCFG_LINK_SKIP_REGANG_LIST &DinarSkipRegangMap */ /* * Device Capabilities Override for disabling ID Clumping */ CONST DEVICE_CAP_OVERRIDE ROMDATA MaranelloOverrideDevCap[2] = { { HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, 0, 0, HT_LIST_MATCH_ANY, {0, 0, 0, 0, 0, 1, 0}, 0, 0, 0, 0, 0 }, { (HT_LIST_TERMINAL) } }; #define BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST &MaranelloOverrideDevCap #include "cpuRegisters.h" #include "cpuFamRegisters.h" #include "cpuFamilyTranslation.h" #include "AdvancedApi.h" #include "heapManager.h" #include "CreateStruct.h" #include "cpuFeatures.h" #include "Table.h" #include "cpuEarlyInit.h" #include "cpuLateInit.h" #include "GnbInterfaceStub.h" #include "PlatformInstall.h"