# SPDX-License-Identifier: GPL-2.0-only chip soc/amd/sabrina register "common_config.espi_config" = "{ .std_io_decode_bitmap = ESPI_DECODE_IO_0x80_EN | ESPI_DECODE_IO_0X2E_0X2F_EN, .io_mode = ESPI_IO_MODE_QUAD, .op_freq_mhz = ESPI_OP_FREQ_16_MHZ, .crc_check_enable = 1, .alert_pin = ESPI_ALERT_PIN_PUSH_PULL, .periph_ch_en = 1, .vw_ch_en = 1, .oob_ch_en = 1, .flash_ch_en = 0, }" register "i2c_scl_reset" = "GPIO_I2C0_SCL | GPIO_I2C1_SCL | GPIO_I2C2_SCL | GPIO_I2C3_SCL" # I2C Pad Control RX Select Configuration register "i2c_pad[0].rx_level" = "I2C_PAD_RX_1_8V" register "i2c_pad[1].rx_level" = "I2C_PAD_RX_1_8V" register "i2c_pad[2].rx_level" = "I2C_PAD_RX_1_8V" register "i2c_pad[3].rx_level" = "I2C_PAD_RX_1_8V" register "s0ix_enable" = "true" register "pspp_policy" = "DXIO_PSPP_DISABLED" # TODO: reenable when PSPP works device domain 0 on device ref iommu on end device ref gpp_bridge_0 on end # GBE device ref gpp_bridge_1 on end # WIFI device ref gpp_bridge_2 on end # NVMe SSD device ref gpp_bridge_a on # Internal GPP Bridge 0 to Bus A device ref gfx on end # Internal GPU (GFX) device ref gfx_hda on end # Display HD Audio Controller (GFXAZ) device ref crypto on end # Crypto Coprocessor device ref xhci_0 on # USB 3.1 (USB0) chip drivers/usb/acpi device ref xhci_0_root_hub on chip drivers/usb/acpi device ref usb3_port0 on end end chip drivers/usb/acpi device ref usb2_port0 on end end chip drivers/usb/acpi device ref usb2_port1 on end end end end end device ref xhci_1 on # USB 3.1 (USB1) chip drivers/usb/acpi device ref xhci_1_root_hub on chip drivers/usb/acpi device ref usb3_port2 on end end chip drivers/usb/acpi device ref usb3_port3 on end end chip drivers/usb/acpi device ref usb2_port2 on end end chip drivers/usb/acpi device ref usb2_port3 on end end chip drivers/usb/acpi device ref usb2_port4 on end end end end end device ref acp on end # Audio Processor (ACP) end device ref gpp_bridge_c on # Internal GPP Bridge 2 to Bus C device ref xhci_2 on chip drivers/usb/acpi register "type" = "UPC_TYPE_HUB" device usb 0.0 alias xhci_2_root_hub on chip drivers/usb/acpi device usb 2.0 alias usb2_port5 on end end end end end end end device ref i2c_0 on end device ref i2c_1 on end device ref i2c_2 on end device ref i2c_3 on end device ref uart_0 on end # UART0 end