/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Serial Presence Detect (SPD) data stored on SDRAM modules. * * Datasheet: * - Name: PC SDRAM Serial Presence Detect (SPD) Specification * Revision 1.2A, December, 1997 * - PDF: http://www.intel.com/design/chipsets/memory/spdsd12a.pdf * * Datasheet (alternative): * - Name: SERIAL PRESENCE DETECT STANDARD, General Standard * JEDEC Standard No. 21-C * Annex J: Serial Presence Detects for DDR2 SDRAM (Revision 1.3): * - PDF: http://www.jedec.org/download/search/4_01_02_10R17.pdf */ #ifndef _SPD_H_ #define _SPD_H_ /* Byte numbers. */ /* Number of bytes used by module manufacturer */ #define SPD_NUM_MANUFACTURER_BYTES 0 #define SPD_TOTAL_SPD_MEMORY_SIZE 1 /* Total SPD memory size */ #define SPD_MEMORY_TYPE 2 /* (Fundamental) memory type */ #define SPD_NUM_ROWS 3 /* Number of row address bits */ /* Number of column address bits */ #define SPD_NUM_COLUMNS 4 /* Number of module rows (banks) */ #define SPD_NUM_DIMM_BANKS 5 #define SPD_MODULE_DATA_WIDTH_LSB 6 /* Module data width (LSB) */ #define SPD_MODULE_DATA_WIDTH_MSB 7 /* Module data width (MSB) */ /* Module interface signal levels */ #define SPD_MODULE_VOLTAGE 8 /* SDRAM cycle time (highest CAS latency), RAS access time (tRAC) */ #define SPD_MIN_CYCLE_TIME_AT_CAS_MAX 9 /* SDRAM access time from clock (highest CAS latency), CAS access time (Tac, * tCAC) */ #define SPD_ACCESS_TIME_FROM_CLOCK 10 #define SPD_DIMM_CONFIG_TYPE 11 /* Module configuration type */ #define SPD_REFRESH 12 /* Refresh rate/type */ #define SPD_PRIMARY_SDRAM_WIDTH 13 /* SDRAM width (primary SDRAM) */ /* Error checking SDRAM (data) width */ #define SPD_ERROR_CHECKING_SDRAM_WIDTH 14 /* SDRAM device attributes, minimum clock delay for back to back random * column */ #define SPD_MIN_CLOCK_DELAY_B2B_RAND_COLUMN 15 /* SDRAM device attributes, burst lengths supported */ #define SPD_SUPPORTED_BURST_LENGTHS 16 /* SDRAM device attributes, number of banks on SDRAM device */ #define SPD_NUM_BANKS_PER_SDRAM 17 /* SDRAM device attributes, CAS latency */ #define SPD_ACCEPTABLE_CAS_LATENCIES 18 /* SDRAM device attributes, CS latency */ #define SPD_CS_LATENCY 19 /* SDRAM device attributes, WE latency */ #define SPD_WE_LATENCY 20 #define SPD_MODULE_ATTRIBUTES 21 /* SDRAM module attributes */ /* SDRAM device attributes, general */ #define SPD_DEVICE_ATTRIBUTES_GENERAL 22 /* SDRAM cycle time (2nd highest CAS latency) */ #define SPD_SDRAM_CYCLE_TIME_2ND 23 /* SDRAM access from clock (2nd highest CAS latency) */ #define SPD_ACCESS_TIME_FROM_CLOCK_2ND 24 /* SDRAM cycle time (3rd highest CAS latency) */ #define SPD_SDRAM_CYCLE_TIME_3RD 25 /* SDRAM access from clock (3rd highest CAS latency) */ #define SPD_ACCESS_TIME_FROM_CLOCK_3RD 26 /* Minimum row precharge time (Trp) */ #define SPD_MIN_ROW_PRECHARGE_TIME 27 /* Minimum row active to row active (Trrd) */ #define SPD_MIN_ROWACTIVE_TO_ROWACTIVE 28 /* Minimum RAS to CAS delay (Trcd) */ #define SPD_MIN_RAS_TO_CAS_DELAY 29 /* Minimum RAS pulse width (Tras) */ #define SPD_MIN_ACTIVE_TO_PRECHARGE_DELAY 30 /* Density of each row on module */ #define SPD_DENSITY_OF_EACH_ROW_ON_MODULE 31 /* Command and address signal input setup time */ #define SPD_CMD_SIGNAL_INPUT_SETUP_TIME 32 /* Command and address signal input hold time */ #define SPD_CMD_SIGNAL_INPUT_HOLD_TIME 33 /* Data signal input setup time */ #define SPD_DATA_SIGNAL_INPUT_SETUP_TIME 34 #define SPD_DATA_SIGNAL_INPUT_HOLD_TIME 35 /* Data signal input hold time */ #define SPD_WRITE_RECOVERY_TIME 36 /* Write recovery time (tWR) */ /* Internal write to read command delay (tWTR) */ #define SPD_INT_WRITE_TO_READ_DELAY 37 /* Internal read to precharge command delay (tRTP) */ #define SPD_INT_READ_TO_PRECHARGE_DELAY 38 /* Memory analysis probe characteristics */ #define SPD_MEM_ANALYSIS_PROBE_PARAMS 39 /* Extension of byte 41 (tRC) and byte 42 (tRFC) */ #define SPD_BYTE_41_42_EXTENSION 40 /* Minimum active to active auto refresh (tRCmin) */ #define SPD_MIN_ACT_TO_ACT_AUTO_REFRESH 41 /* Minimum auto refresh to active/auto refresh (tRFC) */ #define SPD_MIN_AUTO_REFRESH_TO_ACT 42 /* Maximum device cycle time (tCKmax) */ #define SPD_MAX_DEVICE_CYCLE_TIME 43 /* Maximum skew between DQS and DQ (tDQSQ) */ #define SPD_MAX_DQS_DQ_SKEW 44 /* Maximum read data-hold skew factor (tQHS) */ #define SPD_MAX_READ_DATAHOLD_SKEW 45 #define SPD_PLL_RELOCK_TIME 46 /* PLL relock time */ #define SPD_SPD_DATA_REVISION_CODE 62 /* SPD data revision code */ #define SPD_CHECKSUM_FOR_BYTES_0_TO_62 63 /* Checksum for bytes 0-62 */ /* Manufacturer's JEDEC ID code, per EIA/JEP106 (bytes 64-71) */ #define SPD_MANUFACTURER_JEDEC_ID_CODE 64 #define SPD_MANUFACTURING_LOCATION 72 /* Manufacturing location */ /* Manufacturer's part number, in 6-bit ASCII (bytes 73-90) */ #define SPD_MANUFACTURER_PART_NUMBER 73 #define SPD_REVISION_CODE 91 /* Revision code (bytes 91-92) */ /* Manufacturing date (byte 93: year, byte 94: week) */ #define SPD_MANUFACTURING_DATE 93 /* Assembly serial number (bytes 95-98) */ #define SPD_ASSEMBLY_SERIAL_NUMBER 95 /* Manufacturer specific data (bytes 99-125) */ #define SPD_MANUFACTURER_SPECIFIC_DATA 99 /* Intel specification for frequency */ #define SPD_INTEL_SPEC_FOR_FREQUENCY 126 /* Intel specification details for 100MHz support */ #define SPD_INTEL_SPEC_100_MHZ 127 /* DRAM specifications use the following naming conventions for SPD locations */ #define SPD_tRP SPD_MIN_ROW_PRECHARGE_TIME #define SPD_tRRD SPD_MIN_ROWACTIVE_TO_ROWACTIVE #define SPD_tRCD SPD_MIN_RAS_TO_CAS_DELAY #define SPD_tRAS SPD_MIN_ACTIVE_TO_PRECHARGE_DELAY #define SPD_BANK_DENSITY SPD_DENSITY_OF_EACH_ROW_ON_MODULE #define SPD_ADDRESS_CMD_HOLD SPD_CMD_SIGNAL_INPUT_HOLD_TIME /* SDRAM Device Minimum Active to Active/Auto Refresh Time (tRC) */ #define SPD_tRC 41 /* SDRAM Device Minimum Auto Refresh to Active/Auto Refresh (tRFC) */ #define SPD_tRFC 42 /* SPD_MEMORY_TYPE values. */ enum spd_memory_type { SPD_MEMORY_TYPE_UNDEFINED = 0x00, SPD_MEMORY_TYPE_FPM_DRAM = 0x01, SPD_MEMORY_TYPE_EDO = 0x02, SPD_MEMORY_TYPE_PIPELINED_NIBBLE = 0x03, SPD_MEMORY_TYPE_SDRAM = 0x04, SPD_MEMORY_TYPE_MULTIPLEXED_ROM = 0x05, SPD_MEMORY_TYPE_SGRAM_DDR = 0x06, SPD_MEMORY_TYPE_SDRAM_DDR = 0x07, SPD_MEMORY_TYPE_SDRAM_DDR2 = 0x08, SPD_MEMORY_TYPE_FBDIMM_DDR2 = 0x09, SPD_MEMORY_TYPE_FB_PROBE_DDR2 = 0x0a, SPD_MEMORY_TYPE_SDRAM_DDR3 = 0x0b, SPD_MEMORY_TYPE_DDR4_SDRAM = 0x0c, SPD_MEMORY_TYPE_DDR4E_SDRAM = 0x0e, SPD_MEMORY_TYPE_LPDDR3_SDRAM = 0x0f, SPD_MEMORY_TYPE_LPDDR4_SDRAM = 0x10, }; /* SPD_MODULE_VOLTAGE values. */ #define SPD_VOLTAGE_TTL 0 /* 5.0 Volt/TTL */ #define SPD_VOLTAGE_LVTTL 1 /* LVTTL */ #define SPD_VOLTAGE_HSTL 2 /* HSTL 1.5 */ #define SPD_VOLTAGE_SSTL3 3 /* SSTL 3.3 */ #define SPD_VOLTAGE_SSTL2 4 /* SSTL 2.5 */ #define SPD_VOLTAGE_SSTL1 5 /* SSTL 1.8 */ /* SPD_DIMM_CONFIG_TYPE values. */ #define ERROR_SCHEME_NONE 0 #define ERROR_SCHEME_PARITY 1 #define ERROR_SCHEME_ECC 2 /* SPD_ACCEPTABLE_CAS_LATENCIES values. */ // TODO: Check values. #define SPD_CAS_LATENCY_1_0 0x01 #define SPD_CAS_LATENCY_1_5 0x02 #define SPD_CAS_LATENCY_2_0 0x04 #define SPD_CAS_LATENCY_2_5 0x08 #define SPD_CAS_LATENCY_3_0 0x10 #define SPD_CAS_LATENCY_3_5 0x20 #define SPD_CAS_LATENCY_4_0 0x40 #define SPD_CAS_LATENCY_DDR2_2 (1 << 2) #define SPD_CAS_LATENCY_DDR2_3 (1 << 3) #define SPD_CAS_LATENCY_DDR2_4 (1 << 4) #define SPD_CAS_LATENCY_DDR2_5 (1 << 5) #define SPD_CAS_LATENCY_DDR2_6 (1 << 6) #define SPD_CAS_LATENCY_DDR2_7 (1 << 7) /* SPD_SUPPORTED_BURST_LENGTHS values. */ #define SPD_BURST_LENGTH_1 1 #define SPD_BURST_LENGTH_2 2 #define SPD_BURST_LENGTH_4 4 #define SPD_BURST_LENGTH_8 8 #define SPD_BURST_LENGTH_PAGE (1 << 7) /* SPD_MODULE_ATTRIBUTES values. */ #define MODULE_BUFFERED 1 #define MODULE_REGISTERED 2 #define SPD_UNDEFINED 0x00 #define SPD_ECC_8BIT (1<<3) #define SPD_ECC_8BIT_LP5_DDR5 (1<<4) /* Byte 3 [3:0]: DDR4 Module type information */ enum ddr4_module_type { DDR4_SPD_RDIMM = 0x01, DDR4_SPD_UDIMM = 0x02, DDR4_SPD_SODIMM = 0x03, DDR4_SPD_LRDIMM = 0x04, DDR4_SPD_MINI_RDIMM = 0x05, DDR4_SPD_MINI_UDIMM = 0x06, DDR4_SPD_72B_SO_RDIMM = 0x08, DDR4_SPD_72B_SO_UDIMM = 0x09, DDR4_SPD_16B_SO_DIMM = 0x0c, DDR4_SPD_32B_SO_RDIMM = 0x0d, }; enum lpx_module_type { LPX_SPD_LPDIMM = 0x07, LPX_SPD_NONDIMM = 0x0e, }; #endif