/* Memory information */ /* SPDX-License-Identifier: GPL-2.0-only */ #ifndef _MEMORY_INFO_H_ #define _MEMORY_INFO_H_ #include <stdint.h> #define DIMM_INFO_SERIAL_SIZE 4 #define DIMM_INFO_PART_NUMBER_SIZE 33 #define DIMM_INFO_TOTAL 64 /** * If this table is filled and put in CBMEM, * then these info in CBMEM will be used to generate smbios type 17 table * * Values are specified according to the JEDEC SPD Standard. */ struct dimm_info { /* * Size of the module in MiB. */ uint32_t dimm_size; /* * SMBIOS (not SPD) device type. * * See the smbios.h smbios_memory_type enum. */ uint16_t ddr_type; /* * ddr_frequency is deprecated. * Use max_speed_mts and configured_speed_mts instead. */ uint16_t ddr_frequency; uint8_t rank_per_dimm; /* * Socket-ID */ uint8_t soc_num; /* * Memory-Controller-ID */ uint8_t ctrlr_num; /* * Channel-ID */ uint8_t channel_num; /* * DIMM-ID */ uint8_t dimm_num; uint8_t bank_locator; /* * SPD serial number. */ uint8_t serial[DIMM_INFO_SERIAL_SIZE]; /* * The last byte is '\0' for the end of string * * Must contain only printable ASCII. */ uint8_t module_part_number[DIMM_INFO_PART_NUMBER_SIZE]; /* * SPD Manufacturer ID */ uint16_t mod_id; /* * SPD Module Type. * * See spd.h for valid values. * * e.g., SPD_RDIMM, SPD_SODIMM, SPD_MICRO_DIMM */ uint8_t mod_type; /* * SPD bus width. * * Bits 0 - 2 encode the primary bus width: * 0b000 = 8 bit width * 0b001 = 16 bit width * 0b010 = 32 bit width * 0b011 = 64 bit width * * Bits 3 - 4 encode the extension bits (ECC): * 0b00 = 0 extension bits * 0b01 = 8 bit of ECC * * e.g., * 64 bit bus with 8 bits of ECC (72 bits total): 0b1011 * 64 bit bus with 0 bits of ECC (64 bits total): 0b0011 * * See the smbios.h smbios_memory_bus_width enum. */ uint8_t bus_width; /* * Voltage Level */ uint16_t vdd_voltage; /* * Max speed in MT/s * If the value is 0, ddr_frequency should be used instead. */ uint16_t max_speed_mts; /* * Configured speed in MT/s * If the value is 0, ddr_frequency should be used instead. */ uint16_t configured_speed_mts; } __packed; struct memory_info { /* * SMBIOS error correction type. * See the smbios.h smbios_memory_array_ecc enum. */ uint8_t ecc_type; /* Maximum capacity the DRAM controller/mainboard supports */ uint32_t max_capacity_mib; /* Maximum number of DIMMs the DRAM controller/mainboard supports */ uint16_t number_of_devices; /* active DIMM configuration */ uint8_t dimm_cnt; struct dimm_info dimm[DIMM_INFO_TOTAL]; } __packed; /* * mainboard_get_dram_part_num returns a DRAM part number override string * return NULL = no part number override provided by mainboard * return non-NULL = pointer to a string terminating in '\0' */ const char *mainboard_get_dram_part_num(void); #endif